Just curious if anyone has ever replaced their factory Steering Wheel with a third party one? How difficult was/is it to do? The stock one is nice but, would like to know about other options.
I know the Manual states that the Mach-E has Speed sign recognition however, does it also use the Mapping system (Ford’s, Google’s, Waze) to display the speed limit on the display?
There are many roads around my Town and State that display the speed limit VIA a Sign like all other states and...
Manual shifter for EV's?
https://evmagz.com/fords-new-ev-patent-brings-manual-gear-shift-feel-to-electric-vehicles/?fbclid=IwY2xjawJY3F9leHRuA2FlbQIxMQABHapZYkXktm89t4a8BtGLPWAUPmFy59XjStOAnlzjKDJfk9hsPcYXlliDfA_aem_PNaBWTnFrC0ec4vVTkwOoQ
Ok opinion time.
What have you used to clean the rubber floor Mats on your Mach-E? After a long winter with sand and salt my Mats are looking rather grim, I’m looking for opinions on what you have used with success in cleaning these up and bring them back to looking good/great.
George
PS I...
Hi All, Wondering what might be up with this. When vehicle off Car scanner shows 655.35v for the "Hv Contactor V Negative" when on it shows .96V See photos. Is 655.35v Normal?? Has anyone else seen this? No Error codes in OBD or displayed errors shown in car. Possible Car scanner or OBD dongle...
Did a search in the forum, realy didnt find anything
Has anyone else seen this,
When I’m traveling in Engaged Mode, and I place the shifter into neutral before braking (in preparation to help de-rust the rear brakes) and after coming to a complete stop, the dashboard still shows a braking...
Hi All,
Well, my Ford NACS adapter finally arrived today as a surprise. Ordered July 6th, 2024, order number XX122203, I know that high of an order number and it showed up, go figure. No notification from Ford VIA e-mail or other means. (yes, I checked my spam folders) Heavy beast, looks...
FYI when pre-conditioning at home (or anywhere) and plugged in be sure you are providing at least 32 amps to the MachE. I noticed today that when pre-conditioning is first started it will draw about 32 amps then slowly drop to about 25 amps, this is with a (set) 90% HVB SoC. I'm assuming that if...
I know there is an issue with wind noise at around 40MPH but I seem to be having a loud rushing wind noise from the driver side exterior mirror area. Seems to be the worst when there is a head wind.
George
Total newbie at this so…
I'm thinking of getting into using Forscan and need some advice.
Is an FDRS account required?
Recommendations on the hardware and cabling, if any, needed? Laptop requirements, I have an iCar Pro 2s from Vgate Bluetooth scanner will this work, or is the requirement to be...
I did a search on this but didnt find anything in the forum here. (Heaven knows I'm not the greatest with searching)
I have read that Tesla has been using refurb HVBs when a pack needs replacing. Is Ford doing the same? I would guess other manufacturers are and Ford probubly also.
George
Anyone else wish the propulsion sound was louder or at lease adjustable. Mybe its because after years of having resonators on exhaust systems it seems like it is very subtle.
Hi Everyone.
I did a search here for this but came up empty.
Probably in tolerance and I’m nit-picking here but…
My OBD2 scanner shows a HVB SOC at 95.8% but car display shows 99%, and an energy level of 88.4 kWh. After an overnight charge to 100% and app says "Charge complete". It's within 4%...
Being a new owner of a Mach-E, how does one keep the 12V batterie charged, what is/are the best practices?
If I have the car plugged in (with a 48amp charger) and the traction batterie is charged to 80 or 90% (max), which at that point the charge rate drops to a trickle (which it does), does...
Greetings All,
New owner of a 2023 Mach-E Premium, AWD, Extended Range, Manufactured date 9/2023, purchased July 2024. Great deal no interest financing… and new to the Forum.
Anyway, How do I tell where I am as far as OTA updates. I’ve looked around in Sync but the only thing I have found was...