Car won't start stuck in service lane - 2021 MME GTPE eAWD **Bent Fuse - Fixed**

[debsahu]

Have you restarted SYNC? https://www.macheforum.com/site/thr...mach-e-–-various-sync-4-system-concerns.3869/

Sponsored

 

[Mach-Lee]

Use a bigger jump start pack, or better yet jump it off another running vehicle with cables. Needs more power to start.

 

[GrumblesTheDog]

Put a battery booster on it and it reads 11.7v and nothing happens but its a handheld shitty charger.

Yeah, that's a dead LVB. Agree with @Mach-Lee, you need to get a bigger jump pack or even power supply you can put it on for a bit.

 

[ChasingCoral]

Yeah, that's a dead LVB. Agree with @Mach-Lee, you need to get a bigger jump pack or even power supply you can put it on for a bit.

If it's still at the Audi dealership, they should be able to connect a 12v charger.

 

[ChasingCoral]

Did nothing but thank you.

OK, I'm confused. Does your Mach E turn on? If not, how are you able to do a Sync restart?

 

[RickMachE]

It won't drive if the frunk is open. If you close the door, maybe the double honk is telling you that?

 

[Dnorwood98]

Double honk means car is running and key not detected if I remember correctly.

Sounds like the car thinks it is running, but it isn't. But I could be wrong.

 

[Lord Polymath]

Double honk means car is running and key not detected if I remember correctly.

Sounds like the car thinks it is running, but it isn't. But I could be wrong.

This - Double honk when closing the door on my current mustang means that the car is on.

 

[RickMachE]

Have you tried a Sync reset? Hold volume/power and right seek button for 10 seconds?

 

[Dnorwood98]

Thank you. It is double honking when I turn accessory power on (or leave it on) and doesn't when I power it off. No screens or anything turn on otherwise.

I might have missed your response, but have you tried putting it in gear with "accessory power" on? Could it be something is wrong with the displays?

 

[Gimme_my_MME]

Did you pull codes?

 

[Captrs777]

Have you tried a Sync reset? Hold volume/power and right seek button for 10 seconds?

I tried multiple buttons and none worked. Screens just stay off. Doors open/close. Trunk and similar open. Interior/exterior lights on/off.

Ford pass hasn't updated since I left home, but plenty of range and similar.

Lowest the 12v got was 11.4 and they have a charger on it now. Is there a specific cutoff range or something like that?

 

[RickMachE]

The reset is specific, not pushing buttons. Hold volume and right seek on the steering wheel for 10 seconds.

 

[Dnorwood98]

Not forcibly but it wont turn like normal.

Then I wouldn't force it.

 

[Captrs777]

The reset is specific, not pushing buttons. Hold volume and right seek on the steering wheel for 10 seconds.

I did the specific request and others and nothing happened. Not just random stuff. Sorry.

Sponsored