FORScan MME spreadsheet

[LaFong]

The venerable Livnitup has graciously created a spreadsheet for the Mach-E. It only has a few modules at present, he will add more as he finds time. It is MY23, not sure of any differences with 21/22. The 2-press panic button mod worked for me.

Mach-E spreadsheet

Sponsored

 

[21st Century Pony]

Nice! Thank you both!

 

[Neil4Real]

Holy smokes, I can't read it. What 2-press panic button mod did you do?

 

[New2EV]

Bookmarked!

 

[LaFong]

Holy smokes, I can't read it. What 2-press panic button mod did you do?

				PanicActivate_Cfg (PAC)
726-22-01	*xxx	--		0 =	PAC DISABLE		2 =	PAC PULSE
				1 =	PAC DOUBLE

 

[RickMachE]

Holy smokes, I can't read it. What 2-press panic button mod did you do?

It makes the FOB take 2 presses to activate panic vs 1?

 

[LaFong]

It makes the FOB take 2 presses to activate panic vs 1?

That is correct, or deactivate it altogether. I did not test the latter.

 

[byoungblood]

I can confirm that you can disable the panic alarm on a '22. Good riddance!

 

[Arjan]

Is there a setting in there to disable the speaker beeping when backing up ?
Or maybe lowering the volume somehow ?
I am not sure what to look for actually

 

[i8iridium]

Is there a setting in there to disable the speaker beeping when backing up ?
Or maybe lowering the volume somehow ?
I am not sure what to look for actually

There's no way to do it within the logic of the vehicle modules. It can be done manually. There's a few threads on it. You can make it worse by having it chime inside the vehicle as well as outside... It's a bit in the IPC module.

Edit. You can prevent the IPC from detecting that that PACM exists, thus preventing it from warning of an issue, but you still have to physically disconnect it, pull fuse or disable speaker. It's a pain in the ass to pull the fuse or disconnect the PACM due to removal of panels.

 

[i8iridium]

This is also fun...the Auto high beam ramp up that the later 22s and 23s have. Got it working on my early 22.

734-01-01 xxxx xxx1 xx--
734-01-04 00BC 1612 <-have to change your value to match this, or you'll get a headlight system error.

Tried it out and it works perfect. I have no idea what it'll do on a '21. But you must have a higher trim with the LED Projectors, otherwise there isn't a headlamp control module (HCM).

 

[LaFong]

There's no way to do it within the logic of the vehicle modules. It can be done manually. There's a few threads on it. You can make it worse by having it chime inside the vehicle as well as outside... It's a bit in the IPC module.

Edit. You can prevent the IPC from detecting that that PACM exists, thus preventing it from warning of an issue, but you still have to physically disconnect it, pull fuse or disable speaker. It's a pain in the ass to pull the fuse or disconnect the PACM due to removal of panels.

Yes, the fake speaker route is easier. Though you will lose your fake engine noise too, if you like that. https://megaohmmotorsports.bigcartel.com/product/ford-psbk-ece

 

[Arjan]

Yes, the fake speaker route is easier. Though you will lose your fake engine noise too, if you like that. https://megaohmmotorsports.bigcartel.com/product/ford-psbk-ece

Thank you, i have ordered the kit !

 

[LaFong]

Thank you, i have ordered the kit !

Cool. Actually I think the low-forward-speed sound in this speaker is again for pedestrians and is unrelated to the fake propulsion sound.

 

[CarGuy11]

This is also fun...the Auto high beam ramp up that the later 22s and 23s have. Got it working on my early 22.

734-01-01 xxxx xxx1 xx--
734-01-04 00BC 1612 <-have to change your value to match this, or you'll get a headlight system error.

Tried it out and it works perfect. I have no idea what it'll do on a '21. But you must have a higher trim with the LED Projectors, otherwise there isn't a headlamp control module (HCM).

Nice so instead of high beams on or off they slowly come on? Will have to try this.

Sponsored