Mark Hassa
Well-Known Member
- First Name
- Mark
- Joined
- Jun 15, 2022
- Threads
- 9
- Messages
- 300
- Reaction score
- 162
- Location
- Vancouver, BC
- Vehicles
- 2021 Premium Rapid Red Mach E Awd SR
- Occupation
- Food Inspector
- Thread starter
- #1
INTRODUCTION: For those of you with the Canadian and most likely the European versions of the Mach E that would like the E-Brake symbol to say "BRAKE" instead of the more international ( ! ) symbol, this guide is for you. Big thanks to breeves002 for helping me out with this.
PREREQUISITES: You will need the items below to perform this modification.
DISCLAIMER: Perform this modification at your own risk. FORScan, used incorrectly, may cause irreversible damage to hardware which may require a dealership visit, most definitely not covered by warranty. You accept all risk performing this modification, among any other modification using FORScan software.
INSTRUCTIONS:
PREREQUISITES: You will need the items below to perform this modification.
- Latest version of FORScan (2.3.48 as of 07/10/2022)
- FORScan-compatible OBD2 dongle (OBDLink, Mongoose, Veepeak, etc.)
DISCLAIMER: Perform this modification at your own risk. FORScan, used incorrectly, may cause irreversible damage to hardware which may require a dealership visit, most definitely not covered by warranty. You accept all risk performing this modification, among any other modification using FORScan software.
INSTRUCTIONS:
- Open FORScan and connect to your Mach-E.
- As a recommendation, save a copy of your IPC data before proceeding (you should get in the habit of backing up any module you modify)
- Access the Configuration and Programming tab within FORScan.
- Go to IPC as built and make this one change. Leave the x's what they are currently just change what's in the 4 slot (To a 5 ). VIce Versa for someone wanting the more international look.
720-09-02 x4xx xxxx
PHOTOS: