Looking for BC1.3 forscan settings - belgium

[Chapron]

Yes, I was speaking to someone else in Europe that I recommended a 7 there too based on some other things I saw.



There are certain bits in the PSCM that are relevant to things that are relevant to BC. I do not know if these things are different in US spec vehicles as opposed to Euro spec vehicles. I can tell you that certain values here need to be correct in order lane change to work so I included that there for whoever wants to test things to be able to test them. The spreadsheet for the F150 PSCM shows some more details that the Mach E spreadsheet does not and they seem to have the same architecture.

Again: If you are going to test anything here, make sure you make a back-up first.

Can you specify what u mean by backup? Is there a backup Funktion ? I make always a screenshot befor I change values, but if there is a better more educated way to backup please let me know or maybe point me to the thread wherei find more information

Sponsored

 

[rugedraw]

Can you specify what u mean by backup? Is there a backup Funktion ? I make always a screenshot befor I change values, but if there is a better more educated way to backup please let me know or maybe point me to the thread wherei find more information

A screenshot works fine.

In the screenshot below, I have a few things circled as this is part of a tutorial I made for something completely different that what we are talking about. However, see where it says "save all" on the bottom next to where it says "write all" circled in red? Clicking "save all" will back up the config of that module. Before you save the file, name it something that you can easily identify (like IPMA and today's date). You make your changes and if you need to revert back, click the "load all" button next to it, select the file you saved and flash it to put it back to what it was before.