dtbaker61
Well-Known Member
- First Name
- Dan
- Joined
- May 11, 2020
- Threads
- 104
- Messages
- 4,015
- Reaction score
- 3,694
- Location
- santa fe,nm
- Website
- www.envirokarma.org
- Vehicles
- MME (delivered 2/26/21), DIY eMiata BEV
- Occupation
- Solar Sales/install
- Thread starter
- #1
I got some aftermarket wheels, which I really like (Enkie TS-V). But the OEM lug nuts did not fit in the holes..... the chrome covers made the 'shoulders' about 1mm too big. So, I got alloy lug nugs for $55 from VMSracing.com, which fit great, but don't have much thread engagement in the nut. I'm thinking this is not a great thing with alloy nuts, so I am looking for 'long' wheel studs.....
alternatively, I was thinking about going whole hog Ti for both studs and nuts.... but that will probably be $500 for both. I found one source so far, but they are listed as fitting mustang 2015+, not the Mach-e specifically, so I'm not super confident that the studs are the same....
https://www.acerracing.com/products/ford-mustang-titanium-wheel-studs-and-nuts
Does anybody know, for certain, that the wheel studs for mach-e are the same as 2015+ Mustang?
alternatively, I was thinking about going whole hog Ti for both studs and nuts.... but that will probably be $500 for both. I found one source so far, but they are listed as fitting mustang 2015+, not the Mach-e specifically, so I'm not super confident that the studs are the same....
https://www.acerracing.com/products/ford-mustang-titanium-wheel-studs-and-nuts
Does anybody know, for certain, that the wheel studs for mach-e are the same as 2015+ Mustang?
Sponsored
Last edited: