Grux40
Well-Known Member
- First Name
- Jason
- Joined
- Jun 29, 2020
- Threads
- 4
- Messages
- 47
- Reaction score
- 81
- Location
- 43147
- Vehicles
- Mach-E Premium RWD Ext. Range - Infinite Blue
- Occupation
- CTO
This is the best I could do and it seems (so far) to greatly improve performance. I am actually getting front alerts now! The tilt towards the back is only slight. So it's still pretty level. This is using the Gen 2 stock suction cup mount. I think that permanent mount adapter I linked above will work and I will probably order it. The suction cups seem to be holding nice and strong but I just don't trust them in extreme temps, cold or hot.I have a v1 gen1. With the suction cup clip it is NOT positioned in the black dots area bc of the headliner. I don’t have a solution.
Lesson Learned - Blend Mounts are useless on this car. Going to try to return mine. The good news is that higher is better when mounting a radar detector. So as long as there is enough clearance in the black knockout area for the front facing sensor, this is a better spot anyway. The first attempt I made at this mounting spot, not enough of the front sensor was inside the black. It was level though. Second attempt is pictured below and it seems to make a big difference so far.
Sponsored
Last edited: