louibluey
Well-Known Member
- First Name
- Joe
- Joined
- Dec 21, 2020
- Threads
- 60
- Messages
- 888
- Reaction score
- 1,097
- Location
- NY
- Vehicles
- FE "Louibluey" GB
- Occupation
- retired
- Thread starter
- #1
Loaded my 2 month free FORSCan key and just got in a half hour or so exploring (newbie level). FORScan connects easily and every time to MME with Mongoose, I see no compatibility issues so far, with either FDRS or FORScan. I do not yet see how to view the module code in FORScan, either addresses and data fields in hex, nor english and decimal configuration settings. The module list looks incomplete compared to FDRS.
Not sure if any of this even needed the extended license key, I think the extended license key is more for PATS and programming. It's $20 for 3 years, so if FORScan turns out to be useful for MME it's kind of a no brainer.
Here is a sample look at a "Dashboard" look at L2 charging (47A) on the SOBDM module:
Same as above using the "Table" view:
Table view of the DCDC converter module:
Oscilloscope view, bump in current caused by turning on then off both defroster buttons:
Not sure if any of this even needed the extended license key, I think the extended license key is more for PATS and programming. It's $20 for 3 years, so if FORScan turns out to be useful for MME it's kind of a no brainer.
Here is a sample look at a "Dashboard" look at L2 charging (47A) on the SOBDM module:
Same as above using the "Table" view:
Table view of the DCDC converter module:
Oscilloscope view, bump in current caused by turning on then off both defroster buttons:
Last edited: