breeves002
Well-Known Member
- First Name
- Sam
- Joined
- Feb 21, 2021
- Threads
- 90
- Messages
- 1,731
- Reaction score
- 3,548
- Location
- St. Louis, MO
- Vehicles
- 2021 Mach-E GT PE
- Thread starter
- #1
This is the GSM TSB we saw in Europe but they have now released it here.
TECHNICAL SERVICE BULLETIN Illuminated Powertrain Malfunction (Wrench) Indicator - Various Diagnostic Trouble Codes (DTC) - Built On Or Before 09-Sep-2021 | 21-2405 16 November 2021 | |||||||||||
Model:
Issue: Some 2021 Mustang Mach-E vehicles built on or before 09-Sep-2021 may exhibit an illuminated powertrain malfunction (wrench) indicator and/or display the message Shift System Fault – Service required with DTC U0103:87 stored in the secondary on board diagnostic module (SOBDMC). Some vehicles may also exhibit DTCs U0100:00, U0121, U0140, and/or U0155 stored in the gear shift module (GSM). This may be due to the software in the GSM. To correct the condition, follow the Service Procedure to reprogram the GSM. Action: Follow the Service Procedure steps to correct the condition on vehicles that meet all of the following criteria:
Warranty Status: Eligible under provisions of New Vehicle Limited Warranty (NVLW)/Service Part Warranty (SPW)/Special Service Part (SSP)/Extended Service Plan (ESP) coverage. Limits/policies/prior approvals are not altered by a TSB. NVLW/SPW/SSP/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool. Labor Times
1. Reprogram the GSM using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. |
Sponsored