BSKT Design LED Ponies

[Jeff-NoVA]

Agreed. the reverse white looks great, but it does affect the reverse camera.

This is a niche product. It takes time, especially when you really want it. One thing I can say is communication with BSKT Design has been great. Very open and informative.

Absolutely. I had one of the affected wiring harnesses and Miguel and his colleague walked me through moving the wire myself so I did not have to wait for the replacement harness. Miguel has always been extremely responsive and I have purchased several items from him at this point.

I should also mention that if you are considering the lighted side markers that EV Vida is now selling, the front side markers interface just fine with the BSKT front pony harness.

Sponsored

 

[highland58]

I have a LED GT that is similar, I found out over time that the "chrome" parts wore off and looked bad. I thought that if I did that again, that I would put ceramic coating over the entire badge to protect it and hopefully keep the chrome from wearing off. I talked to somebody else on the forum that had the same issue.

 

[miguelmix]

After rereading the OPs very well-written post, I’m feeling a bit more trepidation about tackling this project. I was under the impression that these were “plug and play”. I was not expecting drilling, and tapping into other electric lines to be part of the process ?

They are Jim, plug and play, one of the reasons of the delay is that after we ship the 1st 150 ponies we discovered an issue in the conector, already fixed

 

[miguelmix]

I have a LED GT that is similar, I found out over time that the "chrome" parts wore off and looked bad. I thought that if I did that again, that I would put ceramic coating over the entire badge to protect it and hopefully keep the chrome from wearing off. I talked to somebody else on the forum that had the same issue.

That is not from us, and our have a good dynamic start

 

[miguelmix]

Absolutely. I had one of the affected wiring harnesses and Miguel and his colleague walked me through moving the wire myself so I did not have to wait for the replacement harness. Miguel has always been extremely responsive and I have purchased several items from him at this point.

I should also mention that if you are considering the lighted side markers that EV Vida is now selling, the front side markers interface just fine with the BSKT front pony harness.

Thanks your support big Jeff

 

[miguelmix]

Agreed. the reverse white looks great, but it does affect the reverse camera.

This is a niche product. It takes time, especially when you really want it. One thing I can say is communication with BSKT Design has been great. Very open and informative.

Thanks Spence you are a great supporter

 

[AllTheThings55]

Absolutely. I had one of the affected wiring harnesses and Miguel and his colleague walked me through moving the wire myself so I did not have to wait for the replacement harness. Miguel has always been extremely responsive and I have purchased several items from him at this point.

I should also mention that if you are considering the lighted side markers that EV Vida is now selling, the front side markers interface just fine with the BSKT front pony harness.

So if I buy the markers from Ev Vida I don’t need to buy the harness from them because the BSKT would match up?

That would be great

 

[Jeff-NoVA]

So if I buy the markers from Ev Vida I don’t need to buy the harness from them because the BSKT would match up?

That would be great

You will need the harness. It plugs into the BSKT harness.

 

[AllTheThings55]

You will need the harness. It plugs into the BSKT harness.

Thanks for the clarification!

 

[JCamp]

Anyone still waiting or have they received the light up ponies since the earthquake?

 

[Jimrpa]

I have not received anything, nor heard from Miguel since he explained the earthquake delay. I suspect the tariff stuff has thrown a wrench into everything ?‍

 

[Brucelee]

I have not received anything, nor heard from Miguel since he explained the earthquake delay. I suspect the tariff stuff has thrown a wrench into everything ?‍

Just to let everyone know what’s going on. I DM’d Miguel last week on here and this is the response I got from him.

Hi Bruce, i left this industry and i am working in my restaurant again, getting old and i cant handle both, from now on please contact our friend Bruce Lan by whatsapp (+86 199 2585 2458)
That´s why you don´t see any post for a while.
Bruce is in command and he knows exactly what you bought
I dont know how things are going on, after the earthquake they had other, 145% tariffs, hope all luck to the guys, will not be easy.
From me just to say that was a pleasure to meet you, all the luck in the world.

 

[Jimrpa]

Just to let everyone know what’s going on. I DM’d Miguel last week on here and this is the response I got from him.

Hi Bruce, i left this industry and i am working in my restaurant again, getting old and i cant handle both, from now on please contact our friend Bruce Lan by whatsapp (+86 199 2585 2458)
That´s why you don´t see any post for a while.
Bruce is in command and he knows exactly what you bought
I dont know how things are going on, after the earthquake they had other, 145% tariffs, hope all luck to the guys, will not be easy.
From me just to say that was a pleasure to meet you, all the luck in the world.

Thanks for the update.

 

[Brucelan]

I have not received anything, nor heard from Miguel since he explained the earthquake delay. I suspect the tariff stuff has thrown a wrench into everything ?‍

The presidents will make a deal for sure and we are studing option to start ship throgh Taiwan if the deal is not made, our back up plan

 

[Ridge_Racer]

Reaching to see if anyone got they LED ponies yet.

Sponsored