Rims?

[Tngo23]

the car takes M14x1.5

these are factory-style but about a 1/2" longer (needed with GT and CR1 wheels)

https://www.amazon.com/dp/B07YVB6BM...olid=1JFUYHFQUUBUZ&psc=1&ref_=lv_ov_lig_dp_it

basic set, the ones you see on my car. Make sure hand tools are used to install because an impact will damage the black paint. Where you and I live damaged finish equates to them rusting in a very short timeframe.

https://www.amazon.com/gp/product/B08B62FZS9/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Brian,

Thx for the info but Amazon link said it won't fit MachE's? Thoughts?

! This does not fit

About this item

• Set of 24 Black Lug Nut 14x1.5 Thread with 21mm(13/16") Hex Factory Style
• Direct replacement to Ford OEM lug nut ACPZ-1012-B
• Fit: (2015-2020) Ford F-150, (2015-2020) Lincoln Navigator, (2015-2020) Ford Expedition
• Finish: Black Dual Coating (corrosion resistant and a long lasting black luster)
• Do not use a power wrench/ impact wrench/ pneumatic wrench,Goes with Chrome Rims, Black rims and various other rims

Sponsored

 

[Astro19]

What colour is your MME?

Black. So it does not look as terrible, but I want to make them gloss.

 

[tuminatr]

Brian,

Thx for the info but Amazon link said it won't fit MachE's? Thoughts?

! This does not fit

About this item

• Set of 24 Black Lug Nut 14x1.5 Thread with 21mm(13/16") Hex Factory Style
• Direct replacement to Ford OEM lug nut ACPZ-1012-B
• Fit: (2015-2020) Ford F-150, (2015-2020) Lincoln Navigator, (2015-2020) Ford Expedition
• Finish: Black Dual Coating (corrosion resistant and a long lasting black luster)
• Do not use a power wrench/ impact wrench/ pneumatic wrench,Goes with Chrome Rims, Black rims and various other rims

I noticed that too, I think it's point out that they are longer and take a different size lug wrench. The M14x1.5 is the lug nut thread and pitch that's what is important. Here is a similar set for the GT wheels I will install once it gets warm. And yes you and I only need 20 but I like to have a spare or four.

The pictures are not of the Amazon item, I noticed that after I bought these and it is a better deal than what I got.

 

[Astro19]

I noticed that too, I think it's point out that they are longer and take a different size lug wrench. The M14x1.5 is the lug nut thread and pitch that's what is important. Here is a similar set for the GT wheels I will install once it gets warm. And yes you and I only need 20 but I like to have a spare or four

So any m14x1.5 lug nuts will work? Did your stock MAch wrench work?

 

[MachEMaster]

Black. So it does not look as terrible, but I want to make them gloss.

Black is good. I saw a white Select, with the 19” Aero wheels, that needed a good wash…. It made me rethink my whole order. The wheel arches stood out so badly like cheap plastic, in contrast to the light coloured paint. Don’t get me started on the Aero covers! Lol

 

[Astro19]

Black is good. I saw a white Select, with the 19” Aero wheels, that needed a good wash…. It made me rethink my whole order. The wheel arches stood out so badly like cheap plastic, in contrast to the light coloured paint. Don’t get me started on the Aero covers! Lol

Yeah really dont understand why they could not have had them all gloss. But I did find the part online for 150. But doesnt mention gloss so doubt it is.

 

[tuminatr]

So any m14x1.5 lug nuts will work? Did your stock MAch wrench work?

The factory wrench size is 13/16 see an attached photo so this one will use the same lug wrench and same thread and pitch. So other than being about 1/4" longer they are factory spec and the part number listed 4L3Z-1012-A is the ford OEM lug nut part number for the Mach E

https://www.amazon.com/dp/B07YVB6BM...olid=1JFUYHFQUUBUZ&psc=1&ref_=lv_ov_lig_dp_it

Sponsored