OP
OP
Illinibird
Well-Known Member
- First Name
- Mike
- Joined
- Oct 13, 2020
- Threads
- 40
- Messages
- 1,563
- Reaction score
- 1,445
- Location
- Frankfort Illinois
- Vehicles
- 2015 Acura MDX Adv; 2016 Titanium Fusion Hybrid
- Occupation
- retired Endodontist (root canal specialist) and Clinical Assistant Professor
- Thread starter
- #16
I got around to lining the bottom of the frunk.I used the same shelf liner I have for my tools in the toolbox. It's sticky and keeps them from rolling around causing noise.
Case holds the charging equipment. I have a first aid kit and road hazard kit in back now where charging equipment used to be stored.
Plastic removal tools for the panels should I have to remove them to gain access to the 12 volt battery. Liner is porous so liquids would drain (air would go through too). I bought the liner at Home Depot.
Piece of liner on the little shelf. I doubt that I would use this and may remove it.
Emergency blanket which also holds the charging case and the box of plastic removal tools in place.
Back storage area where I have a First Aid kit and a Roadside Assistance kit.
Tire inflation/repair kit alongside of Roadside Assistance and First Aid kits.
Case holds the charging equipment. I have a first aid kit and road hazard kit in back now where charging equipment used to be stored.
Plastic removal tools for the panels should I have to remove them to gain access to the 12 volt battery. Liner is porous so liquids would drain (air would go through too). I bought the liner at Home Depot.
Piece of liner on the little shelf. I doubt that I would use this and may remove it.
Emergency blanket which also holds the charging case and the box of plastic removal tools in place.
Back storage area where I have a First Aid kit and a Roadside Assistance kit.
Tire inflation/repair kit alongside of Roadside Assistance and First Aid kits.
Last edited:
