Wk217
Active Member
- First Name
- William
- Joined
- Jan 19, 2021
- Threads
- 4
- Messages
- 39
- Reaction score
- 29
- Location
- Southern Utah
- Vehicles
- '25 F-150 Lightning Flash, '22 Mach-E 4X, '15 Flex Limited, '13 C-Max SEL
- Thread starter
- #1
Hi all.
I have a 2022 Premium 4x (Extended Range, AWD), with the Forscan mod enabling the GT power meter (modification done at least 2 years ago).
I have had the 12v battery/door lock recall downloaded for over a month, but it had yet to install correctly as of 2 nights ago due to insufficient charge on 12v battery. I'm still not sure if this update has been completed, but this morning, I received notification for HVAC-25.26. I actually recall the 12v battery/door lock recall being downloaded and the installation attempted as early as 3 months ago, then another OTA was downloaded, installed successfully, followed a couple days later by the same 12v battery/door lock recall being available again (but I may have mis remembered and it was 2 different OTAs that had a hard time completing successfully). Is that how it works - the system will download new OTAs even when previously downloaded ones haven't successfully been completed? or will it only download the next one after the previous one is successful?
Either way, I noticed the output section of the power meter being full of grey bars this morning (may have been as early as yesterday, but definitely this morning), no activity on that side, but the regen side appears to be showing regen correctly. Any thoughts on the entire output section of the power meter greyed out?
I have a 2022 Premium 4x (Extended Range, AWD), with the Forscan mod enabling the GT power meter (modification done at least 2 years ago).
I have had the 12v battery/door lock recall downloaded for over a month, but it had yet to install correctly as of 2 nights ago due to insufficient charge on 12v battery. I'm still not sure if this update has been completed, but this morning, I received notification for HVAC-25.26. I actually recall the 12v battery/door lock recall being downloaded and the installation attempted as early as 3 months ago, then another OTA was downloaded, installed successfully, followed a couple days later by the same 12v battery/door lock recall being available again (but I may have mis remembered and it was 2 different OTAs that had a hard time completing successfully). Is that how it works - the system will download new OTAs even when previously downloaded ones haven't successfully been completed? or will it only download the next one after the previous one is successful?
Either way, I noticed the output section of the power meter being full of grey bars this morning (may have been as early as yesterday, but definitely this morning), no activity on that side, but the regen side appears to be showing regen correctly. Any thoughts on the entire output section of the power meter greyed out?
Sponsored
