Sold: New York Will Ship FS: MACH-E SV706 Signature Wheels Forged

[louibluey]

Purchased these from Terrance - Signature Wheel Ford & Motorsports Division www.Signaturewheel.com June 2021. Ran them late summer '21, and early summer '22 (sold my FE July 2022). Was saving them for a GTPE, but decided against a GT for now. Need the storage space back in my small climate controlled basement. Signature Wheel Forged Monoblock Precision Series SV706, 2021 Ford Mustang Mach E, Gloss Black, 20x8.5, 20x10, PILOT SPORT 4 SUV, 255/45 R 20 front, 295/40 R 20 rear.

SV706 were $5,500 MSRP, but got them on forum discount back then at $4,800. Michelin PILOT SPORT 4 SUV about $1,300. TPMS installed. Tires were mounted with a touchless machine. One of the small weights probably came off, so plan to have them balanced for perfection!

No shipping. Pickup Utica, NY area, or willing to drive up to about 60 miles to meet you part way. (I suppose you could have someone or a moving or shipping company pick them up at your extra cost, for packing and shipping, but then you are completely responsible for any packing or shipping damage. For now, I am not offering packing and shipping)

These are beautiful, extremely high quality wheels, let's get them back out on the road!

Plenty of good tread remaining

Sponsored

 

[louibluey]

Reduced to $1,100

 

[louibluey]

Reduced to $950

 

[louibluey]

Reduced to $850 for pickup at Utica, NY.

 

[BillPitman]

Reduced to $850

Good price, do you suppose the 20” tires have the same circumference as the 19” tires on my 2021 Premuim?!
Offset?
Could meet you at Dunkin’ in Sidney Rt8/7, tomorrow?!
Wait, what size tires are on these rims?
255/45, or 295/40, or are you runnin’ 2 sizes front & rear?
Bill P , Milford,Pa.

 

[louibluey]

Good price, do you suppose the 20” tires have the same circumference as the 19” tires on my 2021 Premuim?!
Offset?
Could meet you at Dunkin’ in Sidney Rt8/7, tomorrow?!
Wait, what size tires are on these rims?
255/45, or 295/40, or are you runnin’ 2 sizes front & rear?
Bill P , Milford,Pa.

Hi Bill, It is a staggered setup, wider in the rear. The speedometer might be off by couple of mph, but the circumference on both is very close. I used these on my first edition (almost same as Premium). They are ideal for a Premium. Search the old threads in this forum, there is at least one thread discussing this setup. The price is pretty much a giveaway at this point (tires that have most of their life remaining are mounted and included), but I did enjoy them for some months. I guess it was my equivalent of an extravagant vacation. I can do Sidney, NY but not tomorrow, PM me by Conversation if you want to work out details.

The wheels are still available.

 

[louibluey]

Now willing to pack and ship U.S. lower 48 by UPS. Base cost for me to pack and ship, not including shipping cost will be $1,000 which includes double wall boxes and other packing materials. Base cost does not include UPS shipping which appears to be about $700 west coast (rough estimate, depends on UPS pricing), less closer to NY. Shipping cost to be determined by destination address. $1,000 plus actual UPS shipping charge. You can provide the UPS shipping tags, which might be less expensive if you have an account with a UPS discount.

New prices: $850 pickup Utica, NY; $950 willing to drive up to 100 miles to meet you part way or deliver if within 100 miles; $1,000 shipping lower 48 includes packing, but does not not include the actual UPS shipping charge.

SV706 were $4,800, Michelin PILOT SPORT 4 SUV about $1,300 plus TPMS and touchless mounting cost. For reference, the cost new was about $6,300.

 

[BMT1071]

Do the stock lug nuts work with them? Any pics of them on your FE?

 

[louibluey]

Mike, I answered in Conversations, here is a recap:

These are the same type wheels that Mark Boris originally spec'd with Terrance. Mark has posted many pictures of his wheels, such as: https://www.macheforum.com/site/thr...re-information-and-pictures.7258/#post-198178 A forum search on "SV706" shows a lot of good info on these wheels and tires.

The OEM lug nuts are too wide, but you probably want black lug nuts anyway. Mark found these worked well:
Set of 20 Veritek 14x1.5mm 13/16 21mm Hex 1.5 Inch 38.5mm Length Black OEM Factory Style Large Acorn Seat Lug Nuts for Ford Mustang Edge Fusion Lincoln Factory Wheels Replaces ACPZ1012D
https://www.amazon.com/gp/product/B07P953QG9

Mark's pictures are much better, but here are a couple on my FE before I sold it:

 

[BMT1071]

Mike, I answered in Conversations, here is a recap:

These are the same type wheels that Mark Boris originally spec'd with Terrance. Mark has posted many pictures of his wheels, such as: https://www.macheforum.com/site/thr...re-information-and-pictures.7258/#post-198178 A forum search on "SV706" shows a lot of good info on these wheels and tires.

The OEM lug nuts are too wide, but you probably want black lug nuts anyway. Mark found these worked well:
Set of 20 Veritek 14x1.5mm 13/16 21mm Hex 1.5 Inch 38.5mm Length Black OEM Factory Style Large Acorn Seat Lug Nuts for Ford Mustang Edge Fusion Lincoln Factory Wheels Replaces ACPZ1012D
https://www.amazon.com/gp/product/B07P953QG9

Mark's pictures are much better, but here are a couple on my FE before I sold it:

Thanks for the reply.

 

[LVMMEGT]

Would you be willing to sell the wheels alone without the tires? Would love them but that tire setup is a bit aggressive for what I am looking for.

 

[louibluey]

Would you be willing to sell the wheels alone without the tires? Would love them but that tire setup is a bit aggressive for what I am looking for.

The wheels are different sizes front and rear: 20x8.5, 20x10.

The place with the touchless machine wants $60 a wheel to unmount the tires, plus a $4 disposal fee, so add $256. Still need to buy heavy boxes for the wheels, but the actual shipping charges should come down. Probably $1,000 for the wheels, $256 for the shop, packing materials (more expensive than I realized before), plus actual shipping. So, $1350 plus actual shipping (shipping could be $500+, need to put details into UPS site).

 

[dj_stang]

These are beautiful wheels for a good price. If I was willing to pick up and didn’t have the PE wheels I would jump on this.

 

[LVMMEGT]

The wheels are different sizes front and rear: 20x8.5, 20x10.

The place with the touchless machine wants $60 a wheel to unmount the tires, plus a $4 disposal fee, so add $256. Still need to buy heavy boxes for the wheels, but the actual shipping charges should come down. Probably $1,000 for the wheels, $256 for the shop, packing materials (more expensive than I realized before), plus actual shipping. So, $1350 plus actual shipping (shipping could be $500+, need to put details into UPS site).

I would be willing to work something out if you are!

edit: you should be able to sell those tires for a good price also.

 

[louibluey]

I would be willing to work something out if you are!

edit: you should be able to sell those tires for a good price also.

Let's talk in Conversations, I will send an opener.

Sponsored