In-Lane Repositioning and Lane Change Assist won't activate

[AtomicInternet]

I searched for a bit and didn't find anything specific to this. Anyone else experience these two refusing to activate?

Blue cruise works great, but won't change lanes with my turn signals anymore. My last update was 6.14 and I did the latest IPMA update via FDRS.

Sponsored

 

[Jmendoza]

There was a issue with this caused my CMR Module needing update .. or like me my asbuilt data was wiped for some reason and @rugedraw helped me get mine to work again using forscan.

 

[rugedraw]

I searched for a bit and didn't find anything specific to this. Anyone else experience these two refusing to activate?

Blue cruise works great, but won't change lanes with my turn signals anymore. My last update was 6.14 and I did the latest IPMA update via FDRS.

Do you have FORScan?

 

[rugedraw]

Found your VIN. The config on your IPMA got wiped by the update you got somehow.

You are showing this on your AB data:

706-01-02

0000

0000

0010

Go in there with FORScan and change it to this:

0500 0000 0015

Reset the IPMA with the wrench icon and the toggle switches should work again.

 

[AtomicInternet]

Found your VIN. The config on your IPMA got wiped by the update you got somehow.

You are showing this on your AB data:

706-01-02

0000

0000

0010

Go in there with FORScan and change it to this:

0500 0000 0015

Reset the IPMA with the wrench icon and the toggle switches should work again.

Awesome! Thanks so much!

 

[Sweepersan]

Hello,

I have a 2022 GTPE that doesn’t have the options for lane change assist or predictive lane repositioning. Is this normal? Should I be waiting for an OTA update, or can I do it in Forscan?

@rugedraw, I’m hoping you can help me.

 

[rugedraw]

H,

I have a 2022 GTPE that doesn’t have the options for lane change assist or predictive lane repositioning. Is this normal? Should I be waiting for an OTA update, or can I do it in Forscan?

@rugedraw, I’m hoping you can help me.

Not sure start version of bluecruise your car shipped with, so I can't answer if your car is supposed to have that or not. Post or PM me your VIN and I'll gladly check tomorrow.

 

[Mach-Lee]

H,

I have a 2022 GTPE that doesn’t have the options for lane change assist or predictive lane repositioning. Is this normal? Should I be waiting for an OTA update, or can I do it in Forscan?

@rugedraw, I’m hoping you can help me.

2021s and 2022s are still on BlueCruise 1.0 which doesn't have in-lane repositioning. That's a feature that came in BlueCruise 1.2 which 2023 and up models have.

 

[Claymation]

Do you have FORScan?

I have the exact same issue. Is the change you suggested the same for all Mach-E’s? I have a 2003 GT.

 

[rugedraw]

I have the exact same issue. Is the change you suggested the same for all Mach-E’s? I have a 2003 GT.

I assume you mean a 2023? Post or send me the VIN so I can check and confirm.

 

[McDuck]

I bought a 2023 GT in April and have the same problem. I have taken it to the dealer twice and the they can't seem to figure out what is wrong. They said my Ford Pass app was the problem. I am at a loss, I really wanted to use the lane change assist with Blue Cruise but it just won't turn on. ?

Anyone have a suggestion on what I should tell the dealership so they can fix it?

 

[eafuw]

Found your VIN. The config on your IPMA got wiped by the update you got somehow.

You are showing this on your AB data:

706-01-02

0000

0000

0010

Go in there with FORScan and change it to this:

0500 0000 0015

Reset the IPMA with the wrench icon and the toggle switches should work again.

Can you help me with mine too brother? My blue cruise works fine for cruise control but the lane change assist feature no longer works for some reason. Usually when I would activate the turn signal it would automatically switch lanes. The arrows indicating that lane change assist is active while on blue cruise interface on the mini screen module does not even appear anymore, despite lane change assist being turned on. Please help.

 

[wholesome]

2021s and 2022s are still on BlueCruise 1.0 which doesn't have in-lane repositioning. That's a feature that came in BlueCruise 1.2 which 2023 and up models have.

Not necessary, I have 22 and received a 1.3 BC update

 

[rugedraw]

Can you help me with mine too brother? My blue cruise works fine for cruise control but the lane change assist feature no longer works for some reason. Usually when I would activate the turn signal it would automatically switch lanes. The arrows indicating that lane change assist is active while on blue cruise interface on the mini screen module does not even appear anymore, despite lane change assist being turned on. Please help.

Gladly, but it may be a bit before I can get back to you. I'm on vacation and don't have access to my goodies until I get back on 2/1.

 

[RailBlazer]

My 2021 Job 2 received 10.1.0 on Monday (even though it wasn't set to update until Tuesday) and has the same issue as the OP. In fact, my mirror auto fold setting also won't stick and the mirrors now have to be unfolded manually. Is resetting the IPMA something a dealer can/will do? I don't have FDRS/FORScan. Or would 10.1.1 be expected to address this?

Sponsored