Repair wheel well trim?

[Red Baron]

Suggestions on how to repair at reasonable cost?

Sponsored

 

[HayaCruza]

Low cost, minimal skill…
Gloss Black paint pen on the bare spots and polishing compound to enhance the dull area.

 

[Jimrpa]

Low cost, minimal skill…
Gloss Black paint pen on the bare spots and polishing compound to enhance the dull area.

Any recommended sources of gloss black paint pens and a polishing compound?

 

[AliRafiee]

Just in case. A new one is
< $150
https://www.superfordparts.com/oem-parts/ford-wheel-opening-molding-lj8z16039aa

Or < $350 at ford.
https://www.superfordparts.com/oem-parts/ford-molding-lj8z16039cb

Depending on which one is the correct color. Maybe use your vin.

 

[HayaCruza]

There are lots of brands.
You could try to find a true touchup paint from the dealer or through someone like Dr Colorchip.
Most autoparts stores have touchup paint as well like Rustoleum or Dupli-Color.

 

[tuminatr]

hard to tell from the photo, but I would try polishing it out

 

[azerik]

Just in case. A new one is
< $150
https://www.superfordparts.com/oem-parts/ford-wheel-opening-molding-lj8z16039aa

Or < $350 at ford.
https://www.superfordparts.com/oem-parts/ford-molding-lj8z16039cb

Depending on which one is the correct color. Maybe use your vin.

Be aware the $150 is primed not painted and is for the select.
The other for ~$350 is the correct off the shelf, only for a Premium. They paint over the pillar black (whatever damn color that actually is that doesn't have a paint code) for GT's

Any recommended sources of gloss black paint pens and a polishing compound?

Polishing I use https://www.amazon.com/dp/B07HFF4XJ2 It breaks down fast so it' doesn't cut well, but it's really hard to over cut with this.
I tried with the dealer for about 30 minutes hunting for the paint code for this. There isn't one that he could find.

Sponsored