Distance to junction differs on sync screen and dash.

[ChuckUK]

I have a 21 Mach-e and I have noticed some strange behaviour in how the sat nav operates. If I use the built in sat nav the sync screen may say 2 mile to a junction, and the arrow display on the dash will also say 1 mile to junction. This distance will count down on both displays all the way to 0 mile and then things get strange. The in built nav will display 200 yards but the arrow display will say 600 yards. The arrow display is consistently about 3 x higher in yards. There is little impact when driving as the blue bar reduces at an appropriate rate for the incoming junction. I have noticed that the same applies when using maps in Apple CarPlay and with the unbuilt system. I have performed a full reset, switched my units to km and back, but the issue persists. Has anyone else had this bug and did they find a solution?

Sponsored

 

[Jtbuster]

Well known issue.

 

[ChuckUK]

Well known issue.

So, if it is well known, is there a solution? I did try searching the forums but found nothing; obviously my search terms are rubbish.

 

[Jtbuster]

So, if it is well known, is there a solution? I did try searching the forums but found nothing; obviously my search terms are rubbish.

I never found a solution.

Sponsored