REAL NON GT´s GRILL ... grill 3d printed

[miguelmix]

Here is how it will look: it will have 2 pieces, one trim and the grill. will be three-dimensional like the original with the pattern. Now testing time

GOOD NEWS FROM BSKT

GRILL offers a stereoscopic 3D visual effect. ?


After many issues were found, many work done ... we are now on the right path.

And we couldn't disappoint our 231 clients who have already pre-ordered the grill.

From one sticked grill we will make a replacement to the trim, trim out ... grill in.

And the 1st Grill to Non Gt´s will happen next month.

The grill feature the original GT grill pattern ... in any color.



P.S. much more complex than we initially thought.

Sponsored

 

[AllTheThings55]

Will this work with the illuminated ponies?

 

[miguelmix]

Will this work with the illuminated ponies?

Yes for sure

 

[AllTheThings55]

Yes for sure

I’m trying to decide between the Rally Wing or the Grill. If I go with the Grill I will wait to install my pony (still in transit)

 

[Brucelee]

Does this mean my grill and other stuff will be shipping soon?

 

[AliRafiee]

I’m trying to decide between the Rally Wing or the Grill. If I go with the Grill I will wait to install my pony (still in transit)

Both is the right decision.

 

[miguelmix]

Does this mean my grill and other stuff will be shipping soon?

Hi Jeff, this is not a quick process. From now, we need to create the sample, conduct testing, make final adjustments, create the metal mold, and start production. We estimate that it will be completed around the end of April.

 

[miguelmix]

I’m trying to decide between the Rally Wing or the Grill. If I go with the Grill I will wait to install my pony (still in transit)

I would go with the grill, front end done. Later you do the rally wing, rear end completed.

 

[AllTheThings55]

I would go with the grill, front end done. Later you do the rally wing, rear end completed.

I’m leaning that way too, but when I try to purchase an item in my cart I get a message that says:

“This store can’t accept payments right now. Refresh this page or come back later”

 

[miguelmix]

I’m leaning that way too, but when I try to purchase an item in my cart I get a message that says:

“This store can’t accept payments right now. Refresh this page or come back later”

Yes, it is true. We suspended the store for a few days to give us time to reorganize and ship all the orders. Next week the payments will be activated again.

 

[AllTheThings55]

Yes, it is true. We suspended the store for a few days to give us time to reorganize and ship all the orders. Next week the payments will be activated again.

Sounds good, thanks!

 

[Brucelee]

Hi Jeff, this is not a quick process. From now, we need to create the sample, conduct testing, make final adjustments, create the metal mold, and start production. We estimate that it will be completed around the end of April.

Thank You

 

[Jeff-NoVA]

Miguel, can you explain a little more about installation? Does this stick to the existing bodywork?

 

[miguelmix]

Miguel, can you explain a little more about installation? Does this stick to the existing bodywork?

It´s my partner that is leading this project and this is ridicoulous but it´s so many work now that we don´t have time to long talks, from my undertsanding you will have to remove the pony, the trim and the licence plate mount, and the grill will fit in the trim spot, the grill will have 3mm. You will receive also a 3M with 3mm thickness.
You will fit the grill, will stick the pony with our 3M 3mm tape in pony shape, probably will have 3M tape on the bottom of the grill to be more secure (just after sample is printed and we can test) and re-instal the license mount , instead rivets i suggest inox screws, all acomodated , perfect fitment and look, doing this way, expensive way ... We could have gone the cheap way, but we are Bskt.

 

[millertime_1985]

It´s my partner that is leading this project and this is ridicoulous but it´s so many work now that we don´t have time to long talks, from my undertsanding you will have to remove the pony, the trim and the licence plate mount, and the grill will fit in the trim spot, the grill will have 3mm. You will receive also a 3M with 3mm thickness.
You will fit the grill, will stick the pony with our 3M 3mm tape in pony shape, probably will have 3M tape on the bottom of the grill to be more secure (just after sample is printed and we can test) and re-instal the license mount , instead rivets i suggest inox screws, all acomodated , perfect fitment and look, doing this way, expensive way ... We could have gone the cheap way, but we are Bskt.

it'll be worth the wait, i'm sure

Sponsored