GrumblesTheDog
Well-Known Member
- Joined
- Aug 21, 2020
- Threads
- 9
- Messages
- 421
- Reaction score
- 644
- Location
- Ohio
- Vehicles
- 2021 Mustang Mach-E GB FE
- Thread starter
- #1
Hi all. I had a flurry of error messages come up upon starting up the car yesterday afternoon - Service Advance Trac, Precollision not available, Drive mode not available, and a few more (although only 'Precollision assist not available' showed up in Fordpass.) Everything cleared up with a few minutes of driving and I didn't feel any changes in handling.
I pulled out my OBD-II reader and got the following DTC above with Carscanner but it disappeared this morning and the car has been starting fine. I am going in for the HVBJB recall next week and may ask to look at it then...is this DTC stored and will they be able to see it? I thought I could see archived codes in Carscanner but maybe not? Also, any idea if this was just a software barf, or maybe early failure? Just changed my 12V a week ago and all the connections are solid. I park outside, so a little worried about critters snacking on wiring...
I pulled out my OBD-II reader and got the following DTC above with Carscanner but it disappeared this morning and the car has been starting fine. I am going in for the HVBJB recall next week and may ask to look at it then...is this DTC stored and will they be able to see it? I thought I could see archived codes in Carscanner but maybe not? Also, any idea if this was just a software barf, or maybe early failure? Just changed my 12V a week ago and all the connections are solid. I park outside, so a little worried about critters snacking on wiring...
Sponsored
