Solved the Phone Charging issue

[Dafstang]

NOt sure f this was happenign to you but my phone would charge and then 30 seconds later stop. I do product design and own a number of 3d printers so I figured I can solve this and I did. I 3D printed this possitioning insert and now the charging works everytime all the time. This was built for an Apple Iphone 12 Pro with a magsafe case around it. It is currently printed out in PLA but I am going to print it out in ABS or polycarbonate so it can stand up to heat. PLA will deform. Anyway thought I would let people know this solves it.

Sponsored

 

[Murse-In-Airy]

A solution a lot of people have been looking for. Nice work. Are you planning to share the file? Or going to try to make some money?

 

[Goober96]

I have the iPhone 12 Pro Max with the Apple MagSafe case. My car hasn’t arrived yet but I would be very interested in buying one of these if you’re willing to make one and sell it.

 

[Dafstang]

I have the iPhone 12 Pro Max with the Apple MagSafe case. My car hasn’t arrived yet but I would be very interested in buying one of these if you’re willing to make one and sell it.

I think the max pro will not have this issue because I think the dividers they have on the tray are built for bigger phones.

 

[fayt349]

I have the exact same phone and case. How do I get what you got?

 

[Dafstang]

A solution a lot of people have been looking for. Nice work. Are you planning to share the file? Or going to try to make some money?

Not sure there is money to be made with this. I just posted the files, they are for the iphone 12 pro with the magsafe case around it. I posted STL, Step and solidworks 2020 version i case you want to modify. I just want to point out that I would 3d print it in polycarbonate or ABS so that it can handle the heat. Standard d print material will warp in the hot sun.

 

[Dafstang]

I have the exact same phone and case. How do I get what you got?

I just posted the files. if you want you can get someone to print them out. I am not sure I want to start printing this for people. BUt I will think about it.

 

[Murse-In-Airy]

Not sure there is money to be made with this. I just posted the files, they are for the iphone 12 pro with the magsafe case around it. I posted STL, Step and solidworks 2020 version i case you want to modify. I just want to point out that I would 3d print it in polycarbonate or ABS so that it can handle the heat. Standard d print material will warp in the hot sun.

A humanitarian I see. Thank You. I don’t have that phone but I know others will benefit.

 

[generaltso]

I think the max pro will not have this issue because I think the dividers they have on the tray are built for bigger phones.

Or smaller phones. My iPhone 12 Mini doesn’t have this problem for some reason.

 

[fayt349]

I just posted the files. if you want you can get someone to print them out. I am not sure I want to start printing this for people. BUt I will think about it.

I don’t see the files, I may be looking in the wrong place

 

[zhackwyatt]

Or smaller phones. My iPhone 12 Mini doesn’t have this problem for some reason.

My Pixel 4 doesn't either.

 

[eltonlin]

I don’t see the files, I may be looking in the wrong place

Same - where are the files posted again?

 

[Dafstang]

I don’t see the files, I may be looking in the wrong place

Not sure why I attached them to this reply so let me know

 

[Dafstang]

Same - where are the files posted again?

Maybe I did it wrong, I see them but not sure why you cant. I attached them here also

 

[Dafstang]

I just posted the files. if you want you can get someone to print them out. I am not sure I want to start printing this for people. BUt I will think about it.

Sponsored