I ran all the FDRS updates and I can TASTE Blue Cruise

[mpshizzle]

Looking through the list of updates included in BC Prep I think I can call out what I have and what I missed

2.4.1 - Unknown Module Change Driver assist feedback sounds
2.4.2 - ABS Changed Brake Pedal Calibration
2.4.3 - IPC UI update
2.4.4 - IPC update
2.4.5 - APIM update
2.5.1 - Various Driver Assist Modues
2.5.2 - BlueCruise Activate
2.5.3 - APIM update

So I'm not sure why the APIM in particular has been left out here. Not sure if it's not been released in general, or just not to my car. Maybe someone else can shed light on that. @generaltso had it pop up for him after doing the other updates. But not the case for me...

Any ideas or thoughts?

Only other one I got, is maybe it's not showing up because my IPMA update won't dissapear from the lsit

Sponsored

 

[Jimrpa]

Thank you! And nope! Which is probably also why my BC is not active ?


Haha we will see how cheap I am

You are so close though, and so much braver than I’d be. ?

 

[Jimrpa]

Looking through the list of updates included in BC Prep I think I can call out what I have and what I missed

2.4.1 - Unknown Module Change Driver assist feedback sounds
2.4.2 - ABS Changed Brake Pedal Calibration
2.4.3 - IPC UI update
2.4.4 - IPC update
2.4.5 - APIM update
2.5.1 - Various Driver Assist Modues
2.5.2 - BlueCruise Activate
2.5.3 - APIM update

So I'm not sure why the APIM in particular has been left out here. Not sure if it's not been released in general, or just not to my car. Maybe someone else can shed light on that. @generaltso had it pop up for him after doing the other updates. But not the case for me...

Any ideas or thoughts?

Only other one I got, is maybe it's not showing up because my IPMA update won't dissapear from the lsit

I may be remembering incorrectly, but isn’t the APIM update the one that FDRS reports as incomplete, even after it’s successfully completed?

 

[generaltso]

Looking through the list of updates included in BC Prep I think I can call out what I have and what I missed

2.4.1 - Unknown Module Change Driver assist feedback sounds
2.4.2 - ABS Changed Brake Pedal Calibration
2.4.3 - IPC UI update
2.4.4 - IPC update
2.4.5 - APIM update
2.5.1 - Various Driver Assist Modues
2.5.2 - BlueCruise Activate
2.5.3 - APIM update

So I'm not sure why the APIM in particular has been left out here. Not sure if it's not been released in general, or just not to my car. Maybe someone else can shed light on that. @generaltso had it pop up for him after doing the other updates. But not the case for me...

Any ideas or thoughts?

Only other one I got, is maybe it's not showing up because my IPMA update won't dissapear from the lsit

I believe 2.4.1 was a GWM update. That OTA tried to install for me on 2/20, but it failed and never retried. I think that may be because I had already installed that GWM update with FDRS shortly before that. Can somebody who had 2.4.1 installed OTA check their GWM version in the widget? Mine's LJ8T-14H021-EKK.

The APIM update in 2.4.5 is a bit of a puzzler. That one popped up for me in FDRS over a week ago, so I guess it's possible that Ford pulled that update out of FDRS after that. Maybe it was made obsolete by 2.5.3 and that will be added to FDRS soon?

 

[generaltso]

I may be remembering incorrectly, but isn’t the APIM update the one that FDRS reports as incomplete, even after it’s successfully completed?

No the APIM (Sync) update reports complete and disappears from the list.

 

[KevinS]

I may be remembering incorrectly, but isn’t the APIM update the one that FDRS reports as incomplete, even after it’s successfully completed?

ABS is the one that's being an a-hole and won't leave the list. It does actually give all indications that it installs correctly.

 

[mpshizzle]

ABS is the one that's being an a-hole and won't leave the list. It does actually give all indications that it installs correctly.

Also the case for IPMA and PSCM.

Plus for me the two rear door modules just don't install correctly at all. Been that way since October so those won't go away either

 

[generaltso]

Plus for me the two rear door modules just don't install correctly at all. Been that way since October so those won't go away either

I couldn’t get any of the 4 door modules to update for me, but the dealer was able to update them when it was in for the glass recalls. I haven’t had any other modules fail to update with FDRS.

 

[mpshizzle]

I couldn’t get any of the 4 door modules to update for me, but the dealer was able to update them when it was in for the glass recalls. I haven’t had any other modules fail to update with FDRS.

Well maybe I'll have my dealer check it out next time it's in, then. Who knows when that'll be ??

 

[generaltso]

Can somebody who had 2.4.1 installed OTA check their GWM version in the widget? Mine's LJ8T-14H021-EKK.

@Eric_C_Boston , I know you've been keeping track of module versions, and I think you've been getting the latest round of BlueCruise updates. Can you please check to see what version your GWM is currently running? Thanks!

 

[benk016]

2.5.1 was the IPMA,CCM,CMR,PSCM update series.

 

[Eric_C_Boston]

@Eric_C_Boston , I know you've been keeping track of module versions, and I think you've been getting the latest round of BlueCruise updates. Can you please check to see what version your GWM is currently running? Thanks!

Power-Up 2.5.2 updated the GWM.

LJ8T-14H021-EKL <- LJ8T-14H021-EKK Strategy(F188)
LJ8T-14J009-EKL <- LJ8T-14J009-EKK ECU Config(F10A)
LJ8T-14J007-EKL <- LJ8T-14J007-EKK ECU Config(F16C)

The previous GWM update was one I did February 12 via FDRS. It changed the part numbers from -EKE to -EKK and updated the applications in the GWM.

Power-Up 2.1.0 appears to be the first GWM update to have BC components. It changed one of the Assembly numbers (DA01) from DSMU5T-14G650-DE to DSMU5T-14G650-ED. The part numbers changed from -AKE to -EKE and the applications were updated. Two BC applications and base map data were added.

The BC base map data version changed with my February 12 update. I assume it was to extend the valid time to November.

 

[Eric_C_Boston]

2.5.2 was the IPMA,CCM,CMR,PSCM update series.

My logs indicate that 2.5.1 was the IPMA, CCM, CMR, PSCM update.

 

[GoGoGadgetMachE]

ABS is the one that's being an a-hole and won't leave the list. It does actually give all indications that it installs correctly.

if it helps you feel better, that one tripped up my dealer apparently. they tried 3 times or something before figuring out what was going on.

 

[mpshizzle]

Power-Up 2.5.2 updated the GWM.

LJ8T-14H021-EKL <- LJ8T-14H021-EKK Strategy(F188)
LJ8T-14J009-EKL <- LJ8T-14J009-EKK ECU Config(F10A)
LJ8T-14J007-EKL <- LJ8T-14J007-EKK ECU Config(F16C)

The previous GWM update was one I did February 12 via FDRS. It changed the part numbers from -EKE to -EKK and updated the applications in the GWM.

Power-Up 2.1.0 appears to be the first GWM update to have BC components. It changed one of the Assembly numbers (DA01) from DSMU5T-14G650-DE to DSMU5T-14G650-ED. The part numbers changed from -AKE to -EKE and the applications were updated. Two BC applications and base map data were added.

The BC base map data version changed with my February 12 update. I assume it was to extend the valid time to November.

Hmm.. Interesting. So the GWM contains BC map data? I suppose that explains why it's big enough to need a USB update

Sponsored