Bluecruise 1.3 for 2021 Mach-E has arrived

[Jimrpa]

Yeah, all well and good, but when are we getting 1.4? I really need to start a thread...

I want to know if we will jump straight to 1.5!

Sponsored

 

[EasyPass]

Ford sent me a postal letter.
Ford sent me an email.
Ford called me on my land line to tell me.
Ford didn't deliver the goods so I let the trial expire.
Ford hasn't updated me with a revision that has consensus of a "finished product".
Ford hasn't communicated in any reasonable way how this is planned to evolve.

Otherwise I am a completely satisfied customer. ?

 

[MacherAWD]

Can you confirm if part of this update fixes the broken animations for the various drive modes, and if the speedo can once again be centered?

I never noticed broken animations, the car did switch to engage vs unbridle and would not switch back I tried multiple times. This morning though it was back to unbridle with no issues.

As for centered speedo, I always had lane keep and auto braking on so my speedo has always been offset. I actually much prefer that as I usually leave my left hand at 12 o'clock so I would block a center speedo.

 

[TheVirtualTim]

I never noticed broken animations, the car did switch to engage vs unbridle and would not switch back I tried multiple times. This morning though it was back to unbridle with no issues.

As for centered speedo, I always had lane keep and auto braking on so my speedo has always been offset. I actually much prefer that as I usually leave my left hand at 12 o'clock so I would block a center speedo.

I’ve come to realize that ‘engage’ is its default mode whenever it resets. We used to get the “drive mode unavailable” (I haven’t seen that message in a while) and everytime it did that it would (a) switch to engage mode and (b) not let you pick any other mode … but only for a few minutes. It occurred to me that a module was restarting and I just had to be patient. It was always back to normal within a few minutes.

 

[bmwhitetx]

Just installed in my 2021 Job2 in EAP. Worked great, inhibit was 1hr 10min

Can you update your post with the rest of the release notes, including the last line that will likely say Software Update IPMA-24.xxxx

 

[MacherAWD]

Can you update your post with the rest of the release notes, including the last line that will likely say Software Update IPMA-24.xxxx

Added it to my original post. IPMA-24.204.827.

And just checked I still can't adjust precondition temp.

 

[music_cities]

I'm getting updates again, but about 9 months behind everyone else. This is on my 2022 GT. So maybe I'll get BC updates for a 2025 autumn road trip! I'd like to be able to change lanes, at least.

 

[ChasingCoral]

How do you know if your Job 1 or Job 2 (2021). I ordered towards the end of 2020 and the car made it to the dealer July 2021. I've always assumed I'm a Job 1 car.

Probably Job 1. The real question is what was your build date. The month and year are on your door plate. It' also on your window sticker.

 

[mdolan92869]

That’s a circular argument.

This thread is really going off on a tangent.

 

[Kamuelaflyer]

How do you know if your Job 1 or Job 2 (2021). I ordered towards the end of 2020 and the car made it to the dealer July 2021. I've always assumed I'm a Job 1 car.

Job 1 cars were built before July 2021. An easy way to tell is to look down by the headlight switch and see if there’s another switch nearby to turn off traction control. If you have that traction control button, it’s a job 2 21. Build month and year is on the drivers door pillar placard.

 

[Kamuelaflyer]

I want to know if we will jump straight to 1.5!

Ford should just jump to BC 6.66 just because. Coming Soon™.

 

[ChasingCoral]

2021 Job 1 Rt.1 edition just received the update overnight. No email notice from Ford, just checked the app and saw that it was applied overnight.

Not EAP

Pictures or it didn't happen! ?

 

[TheSteelRider]

This thread is really going off on a tangent.

Just a sine of the times!

 

[GrisGris]

Pi in all the doubters' faces I guess!

Well, they just sent out an EAP email announcing the 1.3 rollout by model year. so I guess it's official. And it sounds like a global rollout, not just EAP (that was the earlier access dicsussed above).

Not 1.4 but certainly better than 1.0 which I'm afraid to even use!

As a data point, I'm EAP MY21 Job 1 and don't have it yet.

 

[DCC233]

Pictures or it didn't happen! ?

Sponsored