BSKT Design updates

[Jimrpa]

^^^^ Correct. It was becoming difficult for him to be involved in two businesses. His restaurant (that he owns and is the chef) comes first. BSKT has really taken off especially with his huge 15K+ member FB page and he was spending more and more time with it because of his passion for the Mach-E. It was a difficult decision for him to make but he needed to put his full attention back to the restaurant. Plus just became a grandfather, his wife wanted him around a bit more than he had been. ?

I wonder where his restaurant is (yes, I know Portugal, but where ?)

Sponsored

 

[Jimrpa]

What I would like to know, as I get my 25 MME, is how well the CROME / CHROME is holding up these days. I got this from EV-Vida 13 months ago. Is the BLACK edition "natively" black, without a black colored coating? Will there be a black edition rear pony?

I'm considering getting the rear pony for my Rally, if there but if something like this happened with my new one, I would be "unhappy". I have heard that the holes in the body are the same with the rear pony as with the GT, so I could use the GT on my Rally, which would be unique.

Doesn’t the Rallye have regular “pony” badges, front and rear, like all other non-GTs?

 

[markboris]

You’re right. I have a Premium so I have the high. I was trying to do it by memory.

Do you know which wire to move?

There are two wires going into slot 1 in the connector. You need to move one of them over to the wire going into slot 5.

This is the old connector with two white wires going into slot 1 (hard to see but there are two wires there).

This is the new connector with two wires now going into slot 5 after one of them was moved over from slot 1.

 

[markboris]

Doesn’t the Rallye have regular “pony” badges, front and rear, like all other non-GTs?

Yes it does.

 

[Mr. Toejam]

There are two wires going into slot 1 in the connector. You need to move one of them over to the wire going into slot 5.

This is the old connector with two white wires going into slot 1 (hard to see but there are two wires there).

This is the new connector with two wires now going into slot 5 after one of them was moved over from slot 1.

Thanks. The wire that gets moved…is it the the that goes to the pony or the other one?

 

[markboris]

Thanks. The wire that gets moved…is it the the that goes to the pony or the other one?

The other one

 

[Mr. Toejam]

Thanks. I was wondering if the light caused issues reflecting into the lens at night. Appreciate the response

In my case, when the pony switches to white lights (in reverse), the lights do impact the reverse camera. The light cause the camera automatic gain control to kick in and your review goes dark. So, I tested it with some painters tape and it did help but the painters tape really doesn't block the light and it actually projects a blue glow. Adding the tape does not affect the viewing area because what I am blocking out is mostly the rear bumper. So, the tape helps.

I am going to try black vinyl wrap over the bottom part of the fish eye lens. I am either going down to one of the wrap shops to ask for a scrap piece or I might buy a small piece off of amazon. It's only about $8-9 dollars. I am sure I can find a use for the rest of the sheet. 0.5ft x 5.0ft

 

[markboris]

In my case, when the pony switches to white lights (in reverse), the lights do impact the reverse camera. The light cause the camera automatic gain control to kick in and your review goes dark. So, I tested it with some painters tape and it did help but the painters tape really doesn't block the light and it actually projects a blue glow. Adding the tape does not affect the viewing area because what I am blocking out is mostly the rear bumper. So, the tape helps.

I am going to try black vinyl wrap over the bottom part of the fish eye lens. I am either going down to one of the wrap shops to ask for a scrap piece or I might buy a small piece off of amazon. It's only about $8-9 dollars. I am sure I can find a use for the rest of the sheet. 0.5ft x 5.0ft

I think the reason why I had answered that the lit pony does not interfere with the camera is because I did not connect the backup wire to any the three that I installed. None of them wanted the pony to change color. They wanted it red all the time and the red does not interfere with the camera.

 

[Jimrpa]

I think the reason why I had answered that the lit pony does not interfere with the camera is because I did not connect the backup with to any the three that I installed. None of them wanted the pony to change color. They wanted it red all the time and the red does not interfere with the camera.

I really wish the auto train ran to CA! I’d love to get your help on installing things ?

 

[markboris]

Well, I'm in AZ and CO every few months updating and helping out but never been back east... ?

 

[Brucelan]

Hi Bruce,
I have the front light up pony that was shipped with the incorrectly assembled wire harness did the replacement harness also ship?

I have a 2022 US Mach-e which I believe means I have the “low” lights.

Thanks

Yes sir

 

[Reganm59]

I have a 2021 premium. Would it have the high or low lights?

 

[markboris]

I have a 2021 premium. Would it have the high or low lights?

High

 

[dc73pdsgt]

any shipping info for my front pony?

 

[Ford_orr]

Hello, i am Bruce the BSKT Design Ceo

Ponies : All shiped, you just need to wait. Dont look at tracking because maybe just works when arrive the country of the client. Because you were patiente you deserve to receive our new V2

GT lights : Arriving friday and i will post when they arrive Bskt office

Non-GT grills : Molde is beeing done, as soon i have some final samples made, i will open the final orders to this incredible product, a grill for real

Carbon Kits : I am working 20 hours a day to put the factory working again, i am not having time to social medias, we had a guy (my dear Miguel) that did the job of 2 or 3 guys , he managed all our social media, at the moment i cant hire no one to this job, hard times here saddly

What i have in stock :

50 Front ponys V1
120 Front ponys V2
150 Rear ponys V1
280 GT lights (next friday)
3 Retractables

PROMOTION

One time deal

Front pony V1 i can sell for $180 (retail $299)
Front pony V2 i can sell for $220 (retail $399)
Rear pony can go for $180 (retail $299)
Retractable wing in black $700 (Retail $1399)
GT lights : Black or Chrome : $199 (retail $299)

Bruce lee, Jason and Mark Boris need to wait a little bit, thanks for the understanding and support to my company


Now payments are ON again, were disabled for 2 weeks because i couldnt acept any kits

Can DM me if want any of this deals

Thank you Sirs and madams

Bruce Lan

Hi Bruce, did you see my DM regarding the front pony? Thanks.

Sponsored