HELP US ... NEW PROJECT, by BSKT Design

[miguelmix]

Hello, I am Miguel, CEO of BSKT Design Company.

All our initial products are completed, available in carbon fiber, or for those who prefer painted options, we offer fiberglass. STOP PLASTICS NOW!

We are here in the Forum to learn what the must-have GT features are... we want reasonable ideas, please. Although we are a carbon factory and a design company, we can do much more.

The top 3 ideas will go directly to our design department.

If your idea is selected, you will receive your idealized product for free.

Sponsored

 

[kindofblue]

How about a cover for the outside rearview mirrors that closes the gap between the mirror housing and the vehicle. Its purpose would be to reduce wind noise.

 

[raiderchop]

I would love to see something like the intercooler protector I installed on the F-150. Not sure how it would work but I've seen several Mach E's with broken "flaps" in the front.

 

[McSquashy]

My suggestion is a carbon fiber cover for the gloss black trim around the cup holders and center console tray. See image below (sorry for the bad pic).

I like the look of the piano black, but it's a fingerprint magnet and gets scratched easily.

Edit: I know the product that I'm describing is already available, but I wasn't sure if it's really carbon fiber or not. Also, I like the dry carbon look more.

 

[markboris]

My suggestion is a carbon fiber cover for the gloss black trim around the cup holders and center console tray. See image below (sorry for the bad pic).

I like the look of the piano black, but it's a fingerprint magnet and gets scratched easily.

Edit: I know the product that I'm describing is already available, but I wasn't sure if it's really carbon fiber or not. Also, I like the dry carbon look more.

Hey Josh, the cover that is available is plastic, not real carbon fiber. A few weeks ago, I discussed with Miguel the same thing. I want a forged carbon fiber overlay in a matte finish. He is going to work on that. ?. I'm ordering the dash and door trims in the same finish.

 

[McSquashy]

Hey Josh, the cover that is available is plastic, not real carbon fiber. A few weeks ago, I discussed with Miguel the same thing. I want a forged carbon fiber overlay in a matte finish. He is going to work on that. ?. I'm ordering the dash and door trims in the same finish.

Awesome, can't wait to see the finished products!

 

[markboris]

Awesome, can't wait to see the finished products!

Me too. I went back and forth the last couple of weeks deciding on gloss or matte. The gloss really brings out the blacks in the forged and is very contrasty. However I felt it draws your eyes right to all those trims with an interior than is mostly matte gray. The matte will blend in better I think.

Also having him build a new steering wheel for me. I’ve never really been happy with the leather/alcantara one I have now. The compsny I had do it before messed up a few things. I’m going with an all alcantara one this time which is like the OEM one in the GT500 and also had one on my Focus RS. I may add some of the forged carbon fiber to the wheel too. Kind of a work in progress right now. He’s sending me color swatches so I can get the closest match to the gray cloth that’s in the car.

 

[raiderchop]

Hey Josh, the cover that is available is plastic, not real carbon fiber. A few weeks ago, I discussed with Miguel the same thing. I want a forged carbon fiber overlay in a matte finish. He is going to work on that. ?. I'm ordering the dash and door trims in the same finish.

If it can get close to the matte "diamond"-esque trim that is already in the cabin, I'd be interested in the center and and door trims

 

[User100723]

Saw that Carbon fiber hood you recently did, those vents functional?

would be really neat to have a hood that can convert the frunk space into an actual fridge/cooler, venting generated heat out on top. Frunk works really well right now, until you turn the cabin AC on, cause that heat has no where to go except into the frunk wall.

 

[miguelmix]

I would love to see something like the intercooler protector I installed on the F-150. Not sure how it would work but I've seen several Mach E's with broken "flaps" in the front.

On the table, looking for a solution since 2021 when i didn´t like the vents, now will be done

 

[miguelmix]

How about a cover for the outside rearview mirrors that closes the gap between the mirror housing and the vehicle. Its purpose would be to reduce wind noise.

Is a good idea, explain better with some pic maybe. And now i answer the last, yes you are completely right about balance, is exactly that and ´the car is balanced with the new wing

 

[miguelmix]

My suggestion is a carbon fiber cover for the gloss black trim around the cup holders and center console tray. See image below (sorry for the bad pic).

I like the look of the piano black, but it's a fingerprint magnet and gets scratched easily.

Edit: I know the product that I'm describing is already available, but I wasn't sure if it's really carbon fiber or not. Also, I like the dry carbon look more.

Well i send some sets to my partner , many things on the table. In the charger trim i agree not so much in the selector with leather . Off course not, 1st thing to know is price which can be fake the same, but if price is low definitely is plastic waterprinted with carbon pattern. I sold those for 3 years.

 

[miguelmix]

If it can get close to the matte "diamond"-esque trim that is already in the cabin, I'd be interested in the center and and door trims

Thanks, we can´t unfortenelly

 

[miguelmix]

Saw that Carbon fiber hood you recently did, those vents functional?

would be really neat to have a hood that can convert the frunk space into an actual fridge/cooler, venting generated heat out on top. Frunk works really well right now, until you turn the cabin AC on, cause that heat has no where to go except into the frunk wall.

Very good point, i will not pronnounce the name because they lost a fan, you know that big car company about mods in las vegas , Nevada? They did the hood like you said, the creator of that hood that was in Sema 2021 is my friend. That hood had all functional but at the end didn´t improve nothing at all, so we changed the design and the water goes into the front bumper, our solution for now is secret, i don´t know if Nevada company will not copy our solution or any ventor round here. I am tired , in 3 years more then 10 products done by me, after a while they were all over in aliexpress, example : mood guards in black gloss, but the treatment is expensive to turn it gloss, now no one is selling them.

 

[miguelmix]

Saw that Carbon fiber hood you recently did, those vents functional?

would be really neat to have a hood that can convert the frunk space into an actual fridge/cooler, venting generated heat out on top. Frunk works really well right now, until you turn the cabin AC on, cause that heat has no where to go except into the frunk wall.

Forget my answer you are talking in the Animal hood, but the same , not functional and remember underneath the hood you have a whole plastic things inside, so many changes to turn functional what will be hard to do and no one will buy

Sponsored