How to support MNE with jack stands?

[MoonRiver]

If I Rotate tires myself I got to use jack stands to hold the car up, but it only has one jack point on each Conner how can I share it with jack stand while it’s jacked up by a floor jack at the jack point?

Sponsored

 

[bncwhite]

+1 I’m wondering the same thing.

 

[hawkeye3point1]

Jacks or blocks with a short 2x4 on top can be placed along the length of the frame member that the lift points are on.
This thread has lots of details.
https://www.macheforum.com/site/threads/jacking-lifting-mach-e.6009/

 

[bruceski88]

Jacks or blocks with a short 2x4 on top can be placed along the length of the frame member that the lift points are on.
This thread has lots of details.
https://www.macheforum.com/site/threads/jacking-lifting-mach-e.6009/

For $20 I am going to let the tire store rotate my tires every 10 months or so. All of my jacks and jackstands won’t fit.

 

[RickMachE]

@Discount Tire rotates tires for free.

Lugs tighten to 150 pounds.

 

[SnBGC]

If I Rotate tires myself I got to use jack stands to hold the car up, but it only has one jack point on each Conner how can I share it with jack stand while it’s jacked up by a floor jack at the jack point?

You can jack up the vehicle anywhere along that structural member.

https://www.macheforum.com/site/threads/rotating-tires-at-21k-miles.10499/

I rotate my own tires because I also like to use that opportunity to inspect the other items.

 

[MoonRiver]

Thanks for the link, very helpful to see different ideas.

 

[connoisseurr]

Please provide your feedback here:

https://www.macheforum.com/site/threads/poll-mustang-mach-e-specific-jack-pads.21021/#post-495675

Sponsored