Mach-E Aftermarket wheel and tire information and pictures

[amaranth]

Got my atomic wheels installed, 255/45/r20 Pirelli Scorpion Zero AS Plus 3 Elects on 20x8.5 satin bronze rims.

Sponsored

 

[Mantsos]

I am going to buy these wheels to my year -21 mustang mach e (awd, premium) https://www.tsw.com/tsw-sebring and I want to make sure, are size 20x8,5 / 5x112 / offset 40 / bore 72.10mm okey? I maybe need some centric rings?

 

[markboris]

I am going to buy these wheels to my year -21 mustang mach e (awd, premium) https://www.tsw.com/tsw-sebring and I want to make sure, are size 20x8,5 / 5x112 / offset 40 / bore 72.10mm okey? I maybe need some centric rings?

Wheel size of 20x8.5 is ok.
Bolt pattern is NOT ok. It is 5x108.
Offset of 40 is ok.
Bore is NOT ok. It is 63.4mm

The wheels you are looking at come in a 20x8.5, 5x108, ET40 but with a 72.1mm center bore so you will need to get some centric rings. I have never used centric rings as I order my wheels to fit my cars but I understand many wheel manufacturers just make a larger bore then you can use the rings. Maybe something like this.

https://www.amazon.com/WHEEL-CONNECT-Centric-Aluminium-Hubrings/dp/B0C5CNS5MG?th=1

 

[Mantsos]

Wheel size of 20x8.5 is ok.
Bolt pattern is NOT ok. It is 5x108.
Offset of 40 is ok.
Bore is NOT ok. It is 63.4mm

The wheels you are looking at come in a 20x8.5, 5x108, ET40 but with a 72.1mm center bore so you will need to get some centric rings. I have never used centric rings as I order my wheels to fit my cars but I understand many wheel manufacturers just make a larger bore then you can use the rings. Maybe something like this.

https://www.amazon.com/WHEEL-CONNECT-Centric-Aluminium-Hubrings/dp/B0C5CNS5MG?th=1

Thank you. My mistake. So this will be the right choice? I only need some centric rings 72.1mm --> 63.4mm

 

[markboris]

Thank you. My mistake. So this will be the right choice? I only need some centric rings 72.1mm --> 63.4mm

Correct. That is the one. What size tires you going to run? I would recommend going with 255/45R20's on that size wheel.

 

[Mantsos]

Correct. That is the one. What size tires you going to run? I would recommend going with 255/45R20's on that size wheel.

I am not sure.. I just got the car today 255/45/20 sounds good for me.

 

[zenophobe]

245/45 20. Stock 20” 9” wheels. Not sure on offset +35. HF3809051430BZ. SFT Flow-Formed. Shiftwheels.com

 

[markboris]

Andrew, those bronze wheels really go well with Vapor Blue.

 

[zenophobe]

Andrew, those bronze wheels really go well with Vapor Blue.

I was beyond happy with the look

 

[markboris]

Rear wheels for my summer and winter staggered setups. Should all come together in a few weeks. To be continued.....

 

[colMME]

Hey @markboris, thank you so much again for your help!

After quite some time (posted earlier here in this thread) I finally got my new set-up installed a few weeks ago (btw also selling my old GT wheels on marketplace).

Goal: (Mainly) flush fitment in the rear, factory set-up wasn't my fav. Also wanted proper all-weather tires (incl 3PMSF) for driving here in Colorado. Decided for Vredestein Quatrac Pro+ (255s squared set-up).

Got Savini BM14 wheels in 20"x8.5" all round, but offset 45 in the front and 36 in the rear.
Means front wheels should come out approx. +9mm and rear wheels +18mm.

Wasn't sure if I could go offset 33 in the back, so decided for the safer option 36. Got them fitted and drove approx. 1,000mi, everything runs great. Ordered the spacers (3mm) you recommended Mark, they will be installed later today.

 

[markboris]

Hey @markboris, thank you so much again for your help!

After quite some time (posted earlier here in this thread) I finally got my new set-up installed a few weeks ago (btw also selling my old GT wheels on marketplace).

Goal: (Mainly) flush fitment in the rear, factory set-up wasn't my fav. Also wanted proper all-weather tires (incl 3PMSF) for driving here in Colorado. Decided for Vredestein Quatrac Pro+ (255s squared set-up).

Got Savini BM14 wheels in 20"x8.5" all round, but offset 45 in the front and 36 in the rear.
Means front wheels should come out approx. +9mm and rear wheels +18mm.

Wasn't sure if I could go offset 33 in the back, so decided for the safer option 36. Got them fitted and drove approx. 1,000mi, everything runs great. Ordered the spacers (3mm) you recommended Mark, they will be installed later today.

Thanks Patrick and that fitment looks great!

 

[Jerrytball]

Even though I no longer have mine, I’ll put out what I had on mine. 255/45/20’s Michelin cross climate on the following wheels.

 

[ChrisO]

Even though I no longer have mine, I’ll put out what I had on mine. 255/45/20’s Michelin cross climate on the following wheels.

Boy that one "bronzed" rotor looks nice.

 

[Jerrytball]

Boy that one "bronzed" rotor looks nice.

Yeah, I mean it looked brand new the night before and in Mississippi that’s all it takes. Is one night for it to look like that lol

Sponsored