I ran all the FDRS updates and I can TASTE Blue Cruise

[benk016]

My logs indicate that 2.5.1 was the IPMA, CCM, CMR, PSCM update.

Ah you're right! I got those two backwards in my head.

Sponsored

 

[generaltso]

Power-Up 2.5.2 updated the GWM.

LJ8T-14H021-EKL <- LJ8T-14H021-EKK Strategy(F188)
LJ8T-14J009-EKL <- LJ8T-14J009-EKK ECU Config(F10A)
LJ8T-14J007-EKL <- LJ8T-14J007-EKK ECU Config(F16C)

The previous GWM update was one I did February 12 via FDRS. It changed the part numbers from -EKE to -EKK and updated the applications in the GWM.

Interesting. So the GWM update is what we're missing to activate BlueCruise. Did you get 2.4.1 after updating the GWM in February? Since 2.4.1 failed for me and never retried, I just want to make sure I'm not missing something that hasn't already been updated with FDRS. If you went from EKK to EKL with 2.5.2, I think I should be fine.

 

[benk016]

Hmm.. Interesting. So the GWM contains BC map data? I suppose that explains why it's big enough to need a USB update

The map data was updated on my car in a GWM update. Unsure if it just sends it to the GWM to then apply to another module, or if that's where the map lives though.

 

[mpshizzle]

Ah you're right! I got those two backwards in my head.

So the this begs the question... What was 2.5.2???

 

[benk016]

Interesting. So the GWM update is what we're missing to activate BlueCruise. Did you get 2.4.1 after updating the GWM in February? Since 2.4.1 failed for me and never retried, I just want to make sure I'm not missing something that hasn't already been updated with FDRS.

It may not be an update to the car to actually get BC. I think Ford may need to do an activation on their side as well, and so far have only done it to the cars they have sent the updates to.

 

[benk016]

This is the map update my job2 car got

 

[mpshizzle]

When I get home I'll have to check out the state of my GWM after updating this weekend to see if it matches

 

[mpshizzle]

Got the scriptable widget up on my work Mac and checked the GWM

I can confirm that FDRS updated me to the version in 2.5.2 as reported by @Eric_C_Boston

 

[mpshizzle]

So if that's the version we have from FDRS I guess the only thing missing is APIM, and more likely a server side switch that we're not privileged enough to have turned on ?

 

[generaltso]

Got the scriptable widget up on my work Mac and checked the GWM

I can confirm that FDRS updated me to the version in 2.5.2 as reported by @Eric_C_Boston

So your GWM is at EKL? Mine's still at EKK after the updates.

 

[mpshizzle]

So your GWM is at EKL? Mine's still at EKK after the updates.

Oh... Maybe I read his chart backwards. I'm at EKK

 

[Jimrpa]

I believe 2.4.1 was a GWM update. That OTA tried to install for me on 2/20, but it failed and never retried. I think that may be because I had already installed that GWM update with FDRS shortly before that. Can somebody who had 2.4.1 installed OTA check their GWM version in the widget? Mine's LJ8T-14H021-EKK.

The APIM update in 2.4.5 is a bit of a puzzler. That one popped up for me in FDRS over a week ago, so I guess it's possible that Ford pulled that update out of FDRS after that. Maybe it was made obsolete by 2.5.3 and that will be added to FDRS soon?

Here’s my GWM. I’ll be honest, I’m not sure which entry corresponds to “version”

 

[mpshizzle]

Here’s my GWM. I’ll be honest, I’m not sure which entry corresponds to “version”

The biggest one to look for is the 3 letter suffix on the end of several lines. "EKE" in your case.

Is 2.4.1 the last power up you have installed?

 

[generaltso]

Oh... Maybe I read his chart backwards. I'm at EKK

Ah, okay. So we're in the same boat. I really don't think the APIM update that you're missing is relavent since the APIM gets updated again in 2.5.3 anyway.

 

[generaltso]

Here’s my GWM. I’ll be honest, I’m not sure which entry corresponds to “version”

The Strategy line that says (SW Version) is the one I look at.

Sponsored