Mach E GTPE Stuck Power Limited - Slow AF - (on 2nd HVBJB)

[Capt_Everything]

Here I sit at a cracker barrel 95% my way down from NY to SE FL contemplating GTPE ownership once again.

My GTPE had already had the HVBJB replaced after i posted the thread *Bricked* @ BMW i4 M50
That was around 6000 miles. Now at just over 900 miles it's jacked again!

ENTER: TURTLE MODE!

NO CEL, JUST JAIL BARS OF BORDEM HALFWAY ACROSS MY POWER METER, INDEFINITELY.

Before my cracker barrel goodness gets cold, let me close with the codes pulled below. The P05DC troubleshooting refers to checking the SOBDM.

THE DTC description "battery charger hybrid/ev battery output power performance" leads me to believe it may be associated with the reduced power availability.

See pictures below. Initially I looked at the wrong procedure (Just revised the post 1217EST)

Now that I've just got the car down to FL (escaped NY), I need to find a competent Ford service center near Boca Raton.

Preferably one that doesn't lift the Mach E by the battery Rails like Stevens 112 Ford in Patchogue NY!

*Bonus** (See battery rail damage pics below) discovered them while "properly" lifting the car to put my summer tires on for good!

Muppets everywhere, everywhere we are surrounded by Muppets!!!



Car Scanner ELM OBD2
DTC report
Selected brand: Ford
VIN: 3FMTK4SXXMME02289

============1==============
P0D5C(00)
Raw code: 0D5C00
ECU: 7EA
Status: Test failed (current drive cycle), Confirmed, Test failed since last DTC clear

============2==============
P0D80(00)
Raw code: 0D8000
ECU: 7EA[Archive (inactive)]
Status: Test failed since last DTC clear

============3==============
U0293(00)
Raw code: C29300
ECU: 7EC[Archive (inactive)]
Status: Test failed since last DTC clear
OBDII: Lost communication with hybrid powertrain control module

============4==============
U019B(00)
Raw code: C19B00
ECU: 7EC[Archive (inactive)]
Status: Test failed since last DTC clear

============5==============
P1A43(00)
Raw code: 1A4300
ECU: 7EC[Archive (inactive)]
Status: Test failed since last DTC clear

============6==============
P1A42(00)
Raw code: 1A4200
ECU: 7EC[Archive (inactive)]
Status: Test failed since last DTC clear

============7==============
P0685(00)
Raw code: 068500
ECU: Engine control unit
Status: Test not completed during this operation cycle
OBDII: Engine control (EC) relay - open circuit

============8==============
P0850(00)
Raw code: 085000
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Park/neutral position (PNP) switch - input circuit malfunction

============9==============
P1001(00)
Raw code: 100100
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: KOER Not Able To Complete. KOER Aborted.; KOER Test Cannot Be Completed

============10==============
P1397(00)
Raw code: 139700
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: System Voltage Out Of Self Test Range
Ford: System Voltage Out Of Self Test Range

============11==============
P1595(00)
Raw code: 159500
ECU: Engine control unit
Status: Test not completed during this operation cycle
Ford: FORCED ENGINE SHUTDOWN - REMOTE START SYSTEM FAULT, TRANSMISSION RANGE NOT IN PARK

============12==============
P1596(00)
Raw code: 159600
ECU: Engine control unit
Status: Test not completed during this operation cycle

============13==============
P160A(00)
Raw code: 160A00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: CONTROL MODULE VEHICLE OPTIONS RECONFIGURATION ERROR

============14==============
P161C(00)
Raw code: 161C00
ECU: Engine control unit
Status: Test not completed during this operation cycle

============15==============
P1705(00)
Raw code: 170500
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Not in P or N During KOEO / KOER
Ford: Not in P or N During KOEO / KOER

============16==============
P193F(00)
Raw code: 193F00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: VEHICLE SPEED SIGNAL INTERMITTENT

============17==============
P2227(00)
Raw code: 222700
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Barometric pressure (BARO) sensor - range/performance problem

============18==============
P0CF7(00)
Raw code: 0CF700
ECU: 7EA
Status: Test not completed during this operation cycle

============19==============
P0D3D(00)
Raw code: 0D3D00
ECU: 7EA
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============20==============
P0D5E(00)
Raw code: 0D5E00
ECU: 7EA
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============21==============
P0D81(25)
Raw code: 0D8125
ECU: 7EA
Status: Test not completed during this operation cycle

============22==============
P0D93(00)
Raw code: 0D9300
ECU: 7EA
Status: Test not completed during this operation cycle

============23==============
P0C49(00)
Raw code: 0C4900
ECU: 7EC
Status: Test not completed during this operation cycle
OBDII: Hybrid battery pack coolant pump control - circuit high

============24==============
P0C48(00)
Raw code: 0C4800
ECU: 7EC
Status: Test not completed during this operation cycle
OBDII: Hybrid battery pack coolant pump control - circuit low

============25==============
P0D0F(00)
Raw code: 0D0F00
ECU: 7EC
Status: Test not completed during this operation cycle

============26==============
P0C4A(00)
Raw code: 0C4A00
ECU: 7EC
Status: Test not completed during this operation cycle
OBDII: Hybrid battery pack coolant pump control - performance problem

============27==============
P0C4B(00)
Raw code: 0C4B00
ECU: 7EC
Status: Test not completed during this operation cycle
OBDII: Hybrid battery pack coolant pump - no supply voltage

============28==============
P0CFF(00)
Raw code: 0CFF00
ECU: 7EC
Status: Test not completed during this operation cycle

============29==============
P0E1F(00)
Raw code: 0E1F00
ECU: 7EC
Status: Test not completed during this operation cycle

============30==============
P2B29(00)
Raw code: 2B2900
ECU: 7EC
Status: Test not completed during this operation cycle

============31==============
P2CF3(00)
Raw code: 2CF300
ECU: 7EC
Status: Test not completed during this operation cycle

============32==============
P064F(00)
Raw code: 064F00
ECU: 7EC
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Unauthorized software - non original equipment calibration detected

============33==============
P0C43(00)
Raw code: 0C4300
ECU: 7EC
Status: Test not completed during this operation cycle
OBDII: Hybrid battery pack coolant temperature sensor - circuit range/performance

============34==============
P2C85(00)
Raw code: 2C8500
ECU: 7EC
Status: Test not completed during this operation cycle

============35==============
P2BC5(00)
Raw code: 2BC500
ECU: 7EC
Status: Test not completed during this operation cycle

============36==============
P0CA6(00)
Raw code: 0CA600
ECU: 7EC
Status: Test not completed during this operation cycle
OBDII: Hybrid battery system - charging current too high

============37==============
P0531(00)
Raw code: 053100
ECU: 7EE
Status: Test not completed during this operation cycle
OBDII: AC refrigerant pressure sensor - range/performance problem
Ford: A/C Refrigerant Pressure Sensor Circuit Range/Performance

============38==============
P0534(00)
Raw code: 053400
ECU: 7EE
Status: Test not completed during this operation cycle
OBDII: AC refrigerant charge loss
Ford: A/C Refrigerant Charge Loss

============39==============
P0657(00)
Raw code: 065700
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Actuator supply voltage - open circuit

============40==============
P0658(00)
Raw code: 065800
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Actuator supply voltage - circuit low

============41==============
P0659(00)
Raw code: 065900
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Actuator supply voltage - circuit high

============42==============
P06A7(00)
Raw code: 06A700
ECU: 7EE
Status: Test not completed during this operation cycle
OBDII: Sensor reference voltage B - circuit range/performance

============43==============
P06A9(00)
Raw code: 06A900
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Sensor reference voltage D - circuit range/performance

============44==============
P0711(00)
Raw code: 071100
ECU: 7EE
Status: Test not completed during this operation cycle
OBDII: Transmission fluid temperature (TFT) sensor - range/performance problem
Ford: Transmission Fluid Temperature Sensor Circuit Range/Perf

============45==============
P071A(1F)
Raw code: 071A1F
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Transmission mode selection switch A - circuit malfunction

============46==============
P071B(00)
Raw code: 071B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Transmission mode selection switch A - circuit low

============47==============
P071C(00)
Raw code: 071C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Transmission mode selection switch A - circuit high

============48==============
P0726(62)
Raw code: 072662
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Engine RPM input - range/performance problem
Ford: Engine Speed Input Circuit Range/Performance

============49==============
P0811(00)
Raw code: 081100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Excessive clutch slip

============50==============
P0886(00)
Raw code: 088600
ECU: 7EE
Status: Test not completed during this operation cycle
OBDII: Transmission control module (TCM) power relay, control - circuit low

============51==============
P088E(00)
Raw code: 088E00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============52==============
P0A11(00)
Raw code: 0A1100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter enable - circuit open

============53==============
P0A1A(06)
Raw code: 0A1A06
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator control module

============54==============
P0A23(00)
Raw code: 0A2300
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator torque sensor - circuit range/performance

============55==============
P0A2B(64)
Raw code: 0A2B64
ECU: 7EE
Status: Test not completed during this operation cycle
OBDII: Drive motor A temperature sensor - circuit range/performance

============56==============
P0A37(64)
Raw code: 0A3764
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator temperature sensor - circuit range/performance

============57==============
P0A38(00)
Raw code: 0A3800
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator temperature sensor - circuit low

============58==============
P0A39(00)
Raw code: 0A3900
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator temperature sensor - circuit high

============59==============
P0A3A(00)
Raw code: 0A3A00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator temperature sensor - circuit intermittent

============60==============
P0A45(00)
Raw code: 0A4500
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Drive motor B position sensor - circuit malfunction

============61==============
P0A4C(00)
Raw code: 0A4C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator position sensor - circuit range/performance

============62==============
P0A50(92)
Raw code: 0A5092
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator position sensor - circuit over-speed

============63==============
P0A6F(00)
Raw code: 0A6F00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator - phase U current malfunction

============64==============
P0A71(00)
Raw code: 0A7100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator - phase U current high

============65==============
P0A72(00)
Raw code: 0A7200
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator - phase V current malfunction

============66==============
P0A74(00)
Raw code: 0A7400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator - phase V current high

============67==============
P0A75(00)
Raw code: 0A7500
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator - phase W current malfunction

============68==============
P0A77(00)
Raw code: 0A7700
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator - phase W current high

============69==============
P0A7A(96)
Raw code: 0A7A96
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator inverter - performance problem

============70==============
P0A7D(00)
Raw code: 0A7D00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Hybrid battery pack - battery discharged

============71==============
P0A90(62)
Raw code: 0A9062
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Drive motor A - performance problem

============72==============
P0A92(62)
Raw code: 0A9262
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Hybrid generator - performance problem

============73==============
P0A94(00)
Raw code: 0A9400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter - performance problem

============74==============
P0AEE(00)
Raw code: 0AEE00
ECU: 7EE
Status: Test not completed during this operation cycle
OBDII: Drive motor inverter temperature sensor A - circuit range/performance

============75==============
P0BCD(00)
Raw code: 0BCD00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator inverter temperature sensor - circuit range/performance

============76==============
P0BCE(00)
Raw code: 0BCE00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator inverter temperature sensor - circuit low

============77==============
P0BCF(00)
Raw code: 0BCF00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator temperature sensor - circuit high

============78==============
P0BD0(00)
Raw code: 0BD000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator inverter temperature sensor - circuit intermittent/erratic

============79==============
P0C03(00)
Raw code: 0C0300
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Drive motor B - current low

============80==============
P0C0C(00)
Raw code: 0C0C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Drive motor A inverter - power supply low

============81==============
P0C2F(71)
Raw code: 0C2F71
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Internal control module, drive motor/generator, engine speed (RPM) sensor - performance problem

============82==============
P0C39(00)
Raw code: 0C3900
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter temperature sensor A - circuit range/performance

============83==============
P0C3A(00)
Raw code: 0C3A00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter temperature sensor A - circuit low

============84==============
P0C3B(00)
Raw code: 0C3B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter temperature sensor A - circuit high

============85==============
P0C3C(00)
Raw code: 0C3C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter temperature sensor A - circuit intermittent/erratic

============86==============
P0C3E(00)
Raw code: 0C3E00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter temperature sensor B - circuit range/performance

============87==============
P0C3F(00)
Raw code: 0C3F00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter temperature sensor B - circuit low

============88==============
P0C40(00)
Raw code: 0C4000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter temperature sensor B - circuit high

============89==============
P0C41(00)
Raw code: 0C4100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter temperature sensor B - circuit intermittent/erratic

============90==============
P0C5F(00)
Raw code: 0C5F00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Drive motor B position sensor, circuit B - circuit malfunction

============91==============
P0C64(00)
Raw code: 0C6400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator position sensor, circuit A - circuit malfunction

============92==============
P0C65(00)
Raw code: 0C6500
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator position sensor, circuit A - circuit range/performance

============93==============
P0C66(00)
Raw code: 0C6600
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator position sensor, circuit A - circuit low

============94==============
P0C67(00)
Raw code: 0C6700
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator position sensor, circuit A - circuit high

============95==============
P0C6B(00)
Raw code: 0C6B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator position sensor, circuit B - circuit low

============96==============
P0C6C(00)
Raw code: 0C6C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator position sensor, circuit B - circuit high

============97==============
P0CA3(00)
Raw code: 0CA300
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter, step up voltage - performance problem

============98==============
P0CDF(00)
Raw code: 0CDF00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============99==============
P0CE2(00)
Raw code: 0CE200
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============100==============
P0CE3(12)
Raw code: 0CE312
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============101==============
P0D32(00)
Raw code: 0D3200
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============102==============
P0D33(00)
Raw code: 0D3300
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============103==============
P0DFA(00)
Raw code: 0DFA00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============104==============
P0DFC(00)
Raw code: 0DFC00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============105==============
P0E10(00)
Raw code: 0E1000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============106==============
P0E31(00)
Raw code: 0E3100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============107==============
P0E4E(00)
Raw code: 0E4E00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============108==============
P0E51(00)
Raw code: 0E5100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============109==============
P0E52(00)
Raw code: 0E5200
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============110==============
P0E57(00)
Raw code: 0E5700
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============111==============
P0E59(00)
Raw code: 0E5900
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============112==============
P0E5A(00)
Raw code: 0E5A00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============113==============
P0E5B(00)
Raw code: 0E5B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============114==============
P0E5C(00)
Raw code: 0E5C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============115==============
P0E71(00)
Raw code: 0E7100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============116==============
P1594(00)
Raw code: 159400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: FORCED ENGINE SHUTDOWN - REMOTE START SYSTEM FAULT, NO UNATTENDED VEHICLE TIMEOUT

============117==============
P1920(62)
Raw code: 192062
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: ENGINE SPEED SIGNAL

============118==============
P1A0C(00)
Raw code: 1A0C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: HYBRID POWERTRAIN CONTROL MODULE - ENGINE DISABLED

============119==============
P1A0D(62)
Raw code: 1A0D62
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: HYBRID POWERTRAIN CONTROL MODULE - GENERATOR DISABLED

============120==============
P1A0D(64)
Raw code: 1A0D64
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: HYBRID POWERTRAIN CONTROL MODULE - GENERATOR DISABLED

============121==============
P1A0D(96)
Raw code: 1A0D96
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: HYBRID POWERTRAIN CONTROL MODULE - GENERATOR DISABLED

============122==============
P1A0E(61)
Raw code: 1A0E61
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: HYBRID POWERTRAIN CONTROL MODULE - MOTOR DISABLED

============123==============
P1A0F(00)
Raw code: 1A0F00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: HYBRID POWERTRAIN CONTROL MODULE - VEHICLE DISABLED

============124==============
P1A1B(00)
Raw code: 1A1B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: BRAKE SYSTEM CONTROL MODULE - FORCED ENGINE RUNNING

============125==============
P1A40(00)
Raw code: 1A4000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============126==============
P1A41(00)
Raw code: 1A4100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============127==============
P26C1(00)
Raw code: 26C100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============128==============
P2800(00)
Raw code: 280000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Transmission range (TR) sensor B - PRNDL input

============129==============
P2C94(00)
Raw code: 2C9400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============130==============
P2DA7(00)
Raw code: 2DA700
ECU: 7EE
Status: Test not completed during this operation cycle

============131==============
C0030(00)
Raw code: 403000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Left Front Tone Wheel

============132==============
C0033(00)
Raw code: 403300
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Right Front Tone Wheel

============133==============
C0036(00)
Raw code: 403600
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Left Rear Tone Wheel

============134==============
C0039(00)
Raw code: 403900
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Right Rear Tone Wheel

============135==============
C0049(00)
Raw code: 404900
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Brake Fluid

============136==============
C004B(00)
Raw code: 404B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============137==============
C004C(00)
Raw code: 404C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============138==============
C004E(00)
Raw code: 404E00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============139==============
C004F(00)
Raw code: 404F00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============140==============
C0061(00)
Raw code: 406100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Lateral Acceleration Sensor

============141==============
C0062(00)
Raw code: 406200
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Longitudinal Acceleration Sensor

============142==============
C0500(00)
Raw code: 450000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============143==============
C0501(00)
Raw code: 450100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============144==============
C0504(00)
Raw code: 450400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============145==============
C0506(00)
Raw code: 450600
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============146==============
C0507(00)
Raw code: 450700
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============147==============
C050A(00)
Raw code: 450A00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============148==============
C050C(00)
Raw code: 450C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============149==============
C050D(00)
Raw code: 450D00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============150==============
C0510(00)
Raw code: 451000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============151==============
C0512(00)
Raw code: 451200
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============152==============
C0513(00)
Raw code: 451300
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============153==============
C0516(00)
Raw code: 451600
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============154==============
C0518(00)
Raw code: 451800
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============155==============
C0519(00)
Raw code: 451900
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============156==============
C051A(00)
Raw code: 451A00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============157==============
C051B(00)
Raw code: 451B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============158==============
C052B(00)
Raw code: 452B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============159==============
C052D(00)
Raw code: 452D00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============160==============
C052E(00)
Raw code: 452E00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============161==============
C053D(00)
Raw code: 453D00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============162==============
C0555(00)
Raw code: 455500
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============163==============
C0556(00)
Raw code: 455600
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============164==============
C0557(00)
Raw code: 455700
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============165==============
C0558(00)
Raw code: 455800
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============166==============
C055C(00)
Raw code: 455C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============167==============
C055E(00)
Raw code: 455E00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============168==============
C0560(00)
Raw code: 456000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============169==============
C0563(00)
Raw code: 456300
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============170==============
C0564(00)
Raw code: 456400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============171==============
C0565(00)
Raw code: 456500
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============172==============
C056A(00)
Raw code: 456A00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============173==============
C056B(00)
Raw code: 456B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============174==============
C0594(00)
Raw code: 459400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============175==============
C0596(00)
Raw code: 459600
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============176==============
C0597(00)
Raw code: 459700
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============177==============
C1013(00)
Raw code: 501300
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============178==============
C101F(00)
Raw code: 501F00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============179==============
U0100(87)
Raw code: C10087
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, engine control module (ECM) A - no communication

============180==============
U0159(87)
Raw code: C15987
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, parking aid control module A - no communication

============181==============
U0214(00)
Raw code: C21400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, remote function actuation - no communication

============182==============
U0253(87)
Raw code: C25387
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Lost communication with accessory protocol interface module

============183==============
U0315(00)
Raw code: C31500
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Software incompatibility - anti-lock brake system (ABS) control module

============184==============
U045A(56)
Raw code: C45A56
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Invalid data received from parking aid control module A

============185==============
U049C(00)
Raw code: C49C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============186==============
U0515(82)
Raw code: C51582
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Invalid data received from remote function actuation

============187==============
U1027(00)
Raw code: D02700
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: SCP (J1850) Invalid or Missing Data for Engine RPM

============188==============
U1028(00)
Raw code: D02800
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: SCP (J1850) Invalid or Missing Data for Primary Id $1C

============189==============
U103B(00)
Raw code: D03B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============190==============
U2016(04)
Raw code: E01604
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Signal Link Short to Ground (Non SCP) / From NGV Module
Ford: Signal Link Short to Ground (Non SCP)

============191==============
P01EB(96)
Raw code: 01EB96
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============192==============
P0607(00)
Raw code: 060700
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Engine control module (ECM) - performance problem

============193==============
P061A(92)
Raw code: 061A92
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Engine control module (ECM), engine torque - performance problem

============194==============
P061A(93)
Raw code: 061A93
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Engine control module (ECM), engine torque - performance problem

============195==============
P0C2F(92)
Raw code: 0C2F92
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Internal control module, drive motor/generator, engine speed (RPM) sensor - performance problem

============196==============
P0C2F(93)
Raw code: 0C2F93
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Internal control module, drive motor/generator, engine speed (RPM) sensor - performance problem

============197==============
P0CDF(13)
Raw code: 0CDF13
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============198==============
P0D6D(00)
Raw code: 0D6D00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============199==============
P0D6F(00)
Raw code: 0D6F00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============200==============
P0D71(00)
Raw code: 0D7100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============201==============
P0EE3(00)
Raw code: 0EE300
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============202==============
P0EE4(00)
Raw code: 0EE400
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============203==============
P0EE5(00)
Raw code: 0EE500
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============204==============
P2531(00)
Raw code: 253100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Ignition switch, ON position - circuit low

============205==============
P2533(1F)
Raw code: 25331F
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Ignition switch, ON/start position - circuit malfunction

============206==============
P2533(62)
Raw code: 253362
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Ignition switch, ON/start position - circuit malfunction

============207==============
P2611(00)
Raw code: 261100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: AC refrigerant distribution valve - open circuit

============208==============
P2612(00)
Raw code: 261200
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: AC refrigerant distribution valve - circuit low

============209==============
P2613(00)
Raw code: 261300
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: AC refrigerant distribution valve - circuit high

============210==============
P26FD(00)
Raw code: 26FD00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============211==============
P2C95(00)
Raw code: 2C9500
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============212==============
P2D40(00)
Raw code: 2D4000
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============213==============
P2D41(00)
Raw code: 2D4100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============214==============
P2D42(00)
Raw code: 2D4200
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============215==============
P2D44(00)
Raw code: 2D4400
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============216==============
P2DA4(00)
Raw code: 2DA400
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============217==============
P2DA5(00)
Raw code: 2DA500
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============218==============
P2DA6(00)
Raw code: 2DA600
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============219==============
P2E62(00)
Raw code: 2E6200
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============220==============
P2E63(00)
Raw code: 2E6300
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============221==============
P2E64(00)
Raw code: 2E6400
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============222==============
C0047(00)
Raw code: 404700
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Brake Booster Pressure Sensor

============223==============
C0048(00)
Raw code: 404800
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Brake Booster Travel Sensor

============224==============
C004D(00)
Raw code: 404D00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============225==============
C0051(00)
Raw code: 405100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Steering Wheel Position Sensor

============226==============
C0063(00)
Raw code: 406300
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Yaw Rate Sensor

============227==============
C0064(00)
Raw code: 406400
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Roll Rate Sensor

============228==============
C006C(00)
Raw code: 406C00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Stability System

============229==============
C0072(00)
Raw code: 407200
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Brake Temperature Too High

============230==============
C05A4(00)
Raw code: 45A400
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============231==============
C05CC(00)
Raw code: 45CC00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============232==============
C113A(62)
Raw code: 513A62
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============233==============
B3A01(00)
Raw code: BA0100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============234==============
B3A02(00)
Raw code: BA0200
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============235==============
B3A03(00)
Raw code: BA0300
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============236==============
U0001(00)
Raw code: C00100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Controller area network (CAN) data bus, high speed bus

============237==============
U0103(00)
Raw code: C10300
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, gear shift module - no communication

============238==============
U010F(00)
Raw code: C10F00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: AC control module - communication signal lost

============239==============
U0126(00)
Raw code: C12600
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, steering position sensor control module - no communication

============240==============
U0131(00)
Raw code: C13100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, power steering control module - no communication

============241==============
U0140(87)
Raw code: C14087
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, body control module (BCM) - no communication

============242==============
U0143(00)
Raw code: C14300
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, body control module (BCM) C - no communication

============243==============
U0151(00)
Raw code: C15100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, supplementary restraint system (SRS) control module - no communication

============244==============
U0151(87)
Raw code: C15187
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, supplementary restraint system (SRS) control module - no communication

============245==============
U0155(00)
Raw code: C15500
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, instrumentation control module - no communication

============246==============
U0164(00)
Raw code: C16400
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, AC control module - no communication

============247==============
U016A(00)
Raw code: C16A00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Lost communication with navigation control module

============248==============
U0198(00)
Raw code: C19800
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, telematics control module - no communication

============249==============
U0288(87)
Raw code: C28887
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Lost communication with DC to AC converter control module A

============250==============
U0298(00)
Raw code: C29800
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Lost communication with DC to DC converter control module A

============251==============
U0401(00)
Raw code: C40100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Invalid data received - engine control module (ECM)

============252==============
U0420(00)
Raw code: C42000
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Invalid data received - power steering control module

============253==============
U0452(00)
Raw code: C45200
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Invalid data received from supplementary restraint system (SRS) control module

============254==============
U063B(87)
Raw code: C63B87
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============255==============
U069E(81)
Raw code: C69E81
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============256==============
U069E(87)
Raw code: C69E87
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============257==============
U1011(86)
Raw code: D01186
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: SCP (J1850) Invalid or Missing Data for Engine Air Intake; SCP (J1850) INVALID OR MISSING DATA

============258==============
U1012(86)
Raw code: D01286
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: SCP (J1850) Invalid or Missing Data for Primary Id $0C

============259==============
U301B(00)
Raw code: F01B00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============260==============
U351B(00)
Raw code: F51B00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============261==============
U351F(00)
Raw code: F51F00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============262==============
U0293(00)
Raw code: C29300
ECU: BECM[Archive (inactive)]
Status: Test failed since last DTC clear
OBDII: Lost communication with hybrid powertrain control module

============263==============
U019B(00)
Raw code: C19B00
ECU: BECM[Archive (inactive)]
Status: Test failed since last DTC clear

============264==============
P1A43(00)
Raw code: 1A4300
ECU: BECM[Archive (inactive)]
Status: Test failed since last DTC clear

============265==============
P1A42(00)
Raw code: 1A4200
ECU: BECM[Archive (inactive)]
Status: Test failed since last DTC clear

============266==============
B115E(97)
Raw code: 915E97
ECU: CMR
Status: Pending, Confirmed

============267==============
B15E1(97)
Raw code: 95E197
ECU: CMR
Status: Pending, Confirmed

============268==============
B15E2(97)
Raw code: 95E297
ECU: CMR
Status: Pending, Confirmed

============269==============
P0D5C(00)
Raw code: 0D5C00
ECU: SOBDM (BCCM)
Status: Test failed (current drive cycle), Confirmed, Test failed since last DTC clear

============270==============
P0D80(00)
Raw code: 0D8000
ECU: SOBDM (BCCM)[Archive (inactive)]
Status: Test failed since last DTC clear

Sponsored

 

[Rich_Maine]

Here I sit at a cracker barrel 95% my way down from NY to SE FL contemplating GTPE ownership once again.

My GTPE had already had the HVBJB replaced after i posted the thread *Bricked* @ BMW i4 M50
That was around 6000 miles. Now at just over 900 miles it's jacked again!

ENTER: TURTLE MODE!

NO CEL, JUST JAIL BARS OF BORDEM HALFWAY ACROSS MY POWER METER, INDEFINITELY.

Before my cracker barrel goodness gets cold, let me close with the codes pulled below. The most notable P05DC and its short troubleshooting explanation from the 10k page repair manual. It requires an HVBJB replacement if a certain electrical requirement isn't met.



Car Scanner ELM OBD2
DTC report
Selected brand: Ford
VIN: 3FMTK4SXXMME02289

============1==============
P0D5C(00)
Raw code: 0D5C00
ECU: 7EA
Status: Test failed (current drive cycle), Confirmed, Test failed since last DTC clear

============2==============
P0D80(00)
Raw code: 0D8000
ECU: 7EA[Archive (inactive)]
Status: Test failed since last DTC clear

============3==============
U0293(00)
Raw code: C29300
ECU: 7EC[Archive (inactive)]
Status: Test failed since last DTC clear
OBDII: Lost communication with hybrid powertrain control module

============4==============
U019B(00)
Raw code: C19B00
ECU: 7EC[Archive (inactive)]
Status: Test failed since last DTC clear

============5==============
P1A43(00)
Raw code: 1A4300
ECU: 7EC[Archive (inactive)]
Status: Test failed since last DTC clear

============6==============
P1A42(00)
Raw code: 1A4200
ECU: 7EC[Archive (inactive)]
Status: Test failed since last DTC clear

============7==============
P0685(00)
Raw code: 068500
ECU: Engine control unit
Status: Test not completed during this operation cycle
OBDII: Engine control (EC) relay - open circuit

============8==============
P0850(00)
Raw code: 085000
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Park/neutral position (PNP) switch - input circuit malfunction

============9==============
P1001(00)
Raw code: 100100
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: KOER Not Able To Complete. KOER Aborted.; KOER Test Cannot Be Completed

============10==============
P1397(00)
Raw code: 139700
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: System Voltage Out Of Self Test Range
Ford: System Voltage Out Of Self Test Range

============11==============
P1595(00)
Raw code: 159500
ECU: Engine control unit
Status: Test not completed during this operation cycle
Ford: FORCED ENGINE SHUTDOWN - REMOTE START SYSTEM FAULT, TRANSMISSION RANGE NOT IN PARK

============12==============
P1596(00)
Raw code: 159600
ECU: Engine control unit
Status: Test not completed during this operation cycle

============13==============
P160A(00)
Raw code: 160A00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: CONTROL MODULE VEHICLE OPTIONS RECONFIGURATION ERROR

============14==============
P161C(00)
Raw code: 161C00
ECU: Engine control unit
Status: Test not completed during this operation cycle

============15==============
P1705(00)
Raw code: 170500
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Not in P or N During KOEO / KOER
Ford: Not in P or N During KOEO / KOER

============16==============
P193F(00)
Raw code: 193F00
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: VEHICLE SPEED SIGNAL INTERMITTENT

============17==============
P2227(00)
Raw code: 222700
ECU: Engine control unit
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Barometric pressure (BARO) sensor - range/performance problem

============18==============
P0CF7(00)
Raw code: 0CF700
ECU: 7EA
Status: Test not completed during this operation cycle

============19==============
P0D3D(00)
Raw code: 0D3D00
ECU: 7EA
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============20==============
P0D5E(00)
Raw code: 0D5E00
ECU: 7EA
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============21==============
P0D81(25)
Raw code: 0D8125
ECU: 7EA
Status: Test not completed during this operation cycle

============22==============
P0D93(00)
Raw code: 0D9300
ECU: 7EA
Status: Test not completed during this operation cycle

============23==============
P0C49(00)
Raw code: 0C4900
ECU: 7EC
Status: Test not completed during this operation cycle
OBDII: Hybrid battery pack coolant pump control - circuit high

============24==============
P0C48(00)
Raw code: 0C4800
ECU: 7EC
Status: Test not completed during this operation cycle
OBDII: Hybrid battery pack coolant pump control - circuit low

============25==============
P0D0F(00)
Raw code: 0D0F00
ECU: 7EC
Status: Test not completed during this operation cycle

============26==============
P0C4A(00)
Raw code: 0C4A00
ECU: 7EC
Status: Test not completed during this operation cycle
OBDII: Hybrid battery pack coolant pump control - performance problem

============27==============
P0C4B(00)
Raw code: 0C4B00
ECU: 7EC
Status: Test not completed during this operation cycle
OBDII: Hybrid battery pack coolant pump - no supply voltage

============28==============
P0CFF(00)
Raw code: 0CFF00
ECU: 7EC
Status: Test not completed during this operation cycle

============29==============
P0E1F(00)
Raw code: 0E1F00
ECU: 7EC
Status: Test not completed during this operation cycle

============30==============
P2B29(00)
Raw code: 2B2900
ECU: 7EC
Status: Test not completed during this operation cycle

============31==============
P2CF3(00)
Raw code: 2CF300
ECU: 7EC
Status: Test not completed during this operation cycle

============32==============
P064F(00)
Raw code: 064F00
ECU: 7EC
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Unauthorized software - non original equipment calibration detected

============33==============
P0C43(00)
Raw code: 0C4300
ECU: 7EC
Status: Test not completed during this operation cycle
OBDII: Hybrid battery pack coolant temperature sensor - circuit range/performance

============34==============
P2C85(00)
Raw code: 2C8500
ECU: 7EC
Status: Test not completed during this operation cycle

============35==============
P2BC5(00)
Raw code: 2BC500
ECU: 7EC
Status: Test not completed during this operation cycle

============36==============
P0CA6(00)
Raw code: 0CA600
ECU: 7EC
Status: Test not completed during this operation cycle
OBDII: Hybrid battery system - charging current too high

============37==============
P0531(00)
Raw code: 053100
ECU: 7EE
Status: Test not completed during this operation cycle
OBDII: AC refrigerant pressure sensor - range/performance problem
Ford: A/C Refrigerant Pressure Sensor Circuit Range/Performance

============38==============
P0534(00)
Raw code: 053400
ECU: 7EE
Status: Test not completed during this operation cycle
OBDII: AC refrigerant charge loss
Ford: A/C Refrigerant Charge Loss

============39==============
P0657(00)
Raw code: 065700
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Actuator supply voltage - open circuit

============40==============
P0658(00)
Raw code: 065800
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Actuator supply voltage - circuit low

============41==============
P0659(00)
Raw code: 065900
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Actuator supply voltage - circuit high

============42==============
P06A7(00)
Raw code: 06A700
ECU: 7EE
Status: Test not completed during this operation cycle
OBDII: Sensor reference voltage B - circuit range/performance

============43==============
P06A9(00)
Raw code: 06A900
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Sensor reference voltage D - circuit range/performance

============44==============
P0711(00)
Raw code: 071100
ECU: 7EE
Status: Test not completed during this operation cycle
OBDII: Transmission fluid temperature (TFT) sensor - range/performance problem
Ford: Transmission Fluid Temperature Sensor Circuit Range/Perf

============45==============
P071A(1F)
Raw code: 071A1F
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Transmission mode selection switch A - circuit malfunction

============46==============
P071B(00)
Raw code: 071B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Transmission mode selection switch A - circuit low

============47==============
P071C(00)
Raw code: 071C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Transmission mode selection switch A - circuit high

============48==============
P0726(62)
Raw code: 072662
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Engine RPM input - range/performance problem
Ford: Engine Speed Input Circuit Range/Performance

============49==============
P0811(00)
Raw code: 081100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Excessive clutch slip

============50==============
P0886(00)
Raw code: 088600
ECU: 7EE
Status: Test not completed during this operation cycle
OBDII: Transmission control module (TCM) power relay, control - circuit low

============51==============
P088E(00)
Raw code: 088E00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============52==============
P0A11(00)
Raw code: 0A1100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter enable - circuit open

============53==============
P0A1A(06)
Raw code: 0A1A06
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator control module

============54==============
P0A23(00)
Raw code: 0A2300
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator torque sensor - circuit range/performance

============55==============
P0A2B(64)
Raw code: 0A2B64
ECU: 7EE
Status: Test not completed during this operation cycle
OBDII: Drive motor A temperature sensor - circuit range/performance

============56==============
P0A37(64)
Raw code: 0A3764
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator temperature sensor - circuit range/performance

============57==============
P0A38(00)
Raw code: 0A3800
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator temperature sensor - circuit low

============58==============
P0A39(00)
Raw code: 0A3900
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator temperature sensor - circuit high

============59==============
P0A3A(00)
Raw code: 0A3A00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator temperature sensor - circuit intermittent

============60==============
P0A45(00)
Raw code: 0A4500
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Drive motor B position sensor - circuit malfunction

============61==============
P0A4C(00)
Raw code: 0A4C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator position sensor - circuit range/performance

============62==============
P0A50(92)
Raw code: 0A5092
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator position sensor - circuit over-speed

============63==============
P0A6F(00)
Raw code: 0A6F00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator - phase U current malfunction

============64==============
P0A71(00)
Raw code: 0A7100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator - phase U current high

============65==============
P0A72(00)
Raw code: 0A7200
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator - phase V current malfunction

============66==============
P0A74(00)
Raw code: 0A7400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator - phase V current high

============67==============
P0A75(00)
Raw code: 0A7500
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator - phase W current malfunction

============68==============
P0A77(00)
Raw code: 0A7700
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator - phase W current high

============69==============
P0A7A(96)
Raw code: 0A7A96
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator inverter - performance problem

============70==============
P0A7D(00)
Raw code: 0A7D00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Hybrid battery pack - battery discharged

============71==============
P0A90(62)
Raw code: 0A9062
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Drive motor A - performance problem

============72==============
P0A92(62)
Raw code: 0A9262
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Hybrid generator - performance problem

============73==============
P0A94(00)
Raw code: 0A9400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter - performance problem

============74==============
P0AEE(00)
Raw code: 0AEE00
ECU: 7EE
Status: Test not completed during this operation cycle
OBDII: Drive motor inverter temperature sensor A - circuit range/performance

============75==============
P0BCD(00)
Raw code: 0BCD00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator inverter temperature sensor - circuit range/performance

============76==============
P0BCE(00)
Raw code: 0BCE00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator inverter temperature sensor - circuit low

============77==============
P0BCF(00)
Raw code: 0BCF00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator temperature sensor - circuit high

============78==============
P0BD0(00)
Raw code: 0BD000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator inverter temperature sensor - circuit intermittent/erratic

============79==============
P0C03(00)
Raw code: 0C0300
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Drive motor B - current low

============80==============
P0C0C(00)
Raw code: 0C0C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Drive motor A inverter - power supply low

============81==============
P0C2F(71)
Raw code: 0C2F71
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Internal control module, drive motor/generator, engine speed (RPM) sensor - performance problem

============82==============
P0C39(00)
Raw code: 0C3900
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter temperature sensor A - circuit range/performance

============83==============
P0C3A(00)
Raw code: 0C3A00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter temperature sensor A - circuit low

============84==============
P0C3B(00)
Raw code: 0C3B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter temperature sensor A - circuit high

============85==============
P0C3C(00)
Raw code: 0C3C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter temperature sensor A - circuit intermittent/erratic

============86==============
P0C3E(00)
Raw code: 0C3E00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter temperature sensor B - circuit range/performance

============87==============
P0C3F(00)
Raw code: 0C3F00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter temperature sensor B - circuit low

============88==============
P0C40(00)
Raw code: 0C4000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter temperature sensor B - circuit high

============89==============
P0C41(00)
Raw code: 0C4100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter temperature sensor B - circuit intermittent/erratic

============90==============
P0C5F(00)
Raw code: 0C5F00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Drive motor B position sensor, circuit B - circuit malfunction

============91==============
P0C64(00)
Raw code: 0C6400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator position sensor, circuit A - circuit malfunction

============92==============
P0C65(00)
Raw code: 0C6500
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator position sensor, circuit A - circuit range/performance

============93==============
P0C66(00)
Raw code: 0C6600
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator position sensor, circuit A - circuit low

============94==============
P0C67(00)
Raw code: 0C6700
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator position sensor, circuit A - circuit high

============95==============
P0C6B(00)
Raw code: 0C6B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator position sensor, circuit B - circuit low

============96==============
P0C6C(00)
Raw code: 0C6C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Generator position sensor, circuit B - circuit high

============97==============
P0CA3(00)
Raw code: 0CA300
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: DC to DC converter, step up voltage - performance problem

============98==============
P0CDF(00)
Raw code: 0CDF00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============99==============
P0CE2(00)
Raw code: 0CE200
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============100==============
P0CE3(12)
Raw code: 0CE312
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============101==============
P0D32(00)
Raw code: 0D3200
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============102==============
P0D33(00)
Raw code: 0D3300
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============103==============
P0DFA(00)
Raw code: 0DFA00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============104==============
P0DFC(00)
Raw code: 0DFC00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============105==============
P0E10(00)
Raw code: 0E1000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============106==============
P0E31(00)
Raw code: 0E3100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============107==============
P0E4E(00)
Raw code: 0E4E00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============108==============
P0E51(00)
Raw code: 0E5100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============109==============
P0E52(00)
Raw code: 0E5200
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============110==============
P0E57(00)
Raw code: 0E5700
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============111==============
P0E59(00)
Raw code: 0E5900
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============112==============
P0E5A(00)
Raw code: 0E5A00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============113==============
P0E5B(00)
Raw code: 0E5B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============114==============
P0E5C(00)
Raw code: 0E5C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============115==============
P0E71(00)
Raw code: 0E7100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============116==============
P1594(00)
Raw code: 159400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: FORCED ENGINE SHUTDOWN - REMOTE START SYSTEM FAULT, NO UNATTENDED VEHICLE TIMEOUT

============117==============
P1920(62)
Raw code: 192062
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: ENGINE SPEED SIGNAL

============118==============
P1A0C(00)
Raw code: 1A0C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: HYBRID POWERTRAIN CONTROL MODULE - ENGINE DISABLED

============119==============
P1A0D(62)
Raw code: 1A0D62
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: HYBRID POWERTRAIN CONTROL MODULE - GENERATOR DISABLED

============120==============
P1A0D(64)
Raw code: 1A0D64
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: HYBRID POWERTRAIN CONTROL MODULE - GENERATOR DISABLED

============121==============
P1A0D(96)
Raw code: 1A0D96
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: HYBRID POWERTRAIN CONTROL MODULE - GENERATOR DISABLED

============122==============
P1A0E(61)
Raw code: 1A0E61
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: HYBRID POWERTRAIN CONTROL MODULE - MOTOR DISABLED

============123==============
P1A0F(00)
Raw code: 1A0F00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: HYBRID POWERTRAIN CONTROL MODULE - VEHICLE DISABLED

============124==============
P1A1B(00)
Raw code: 1A1B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: BRAKE SYSTEM CONTROL MODULE - FORCED ENGINE RUNNING

============125==============
P1A40(00)
Raw code: 1A4000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============126==============
P1A41(00)
Raw code: 1A4100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============127==============
P26C1(00)
Raw code: 26C100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============128==============
P2800(00)
Raw code: 280000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Transmission range (TR) sensor B - PRNDL input

============129==============
P2C94(00)
Raw code: 2C9400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============130==============
P2DA7(00)
Raw code: 2DA700
ECU: 7EE
Status: Test not completed during this operation cycle

============131==============
C0030(00)
Raw code: 403000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Left Front Tone Wheel

============132==============
C0033(00)
Raw code: 403300
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Right Front Tone Wheel

============133==============
C0036(00)
Raw code: 403600
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Left Rear Tone Wheel

============134==============
C0039(00)
Raw code: 403900
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Right Rear Tone Wheel

============135==============
C0049(00)
Raw code: 404900
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Brake Fluid

============136==============
C004B(00)
Raw code: 404B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============137==============
C004C(00)
Raw code: 404C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============138==============
C004E(00)
Raw code: 404E00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============139==============
C004F(00)
Raw code: 404F00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============140==============
C0061(00)
Raw code: 406100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Lateral Acceleration Sensor

============141==============
C0062(00)
Raw code: 406200
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Longitudinal Acceleration Sensor

============142==============
C0500(00)
Raw code: 450000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============143==============
C0501(00)
Raw code: 450100
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============144==============
C0504(00)
Raw code: 450400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============145==============
C0506(00)
Raw code: 450600
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============146==============
C0507(00)
Raw code: 450700
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============147==============
C050A(00)
Raw code: 450A00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============148==============
C050C(00)
Raw code: 450C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============149==============
C050D(00)
Raw code: 450D00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============150==============
C0510(00)
Raw code: 451000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============151==============
C0512(00)
Raw code: 451200
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============152==============
C0513(00)
Raw code: 451300
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============153==============
C0516(00)
Raw code: 451600
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============154==============
C0518(00)
Raw code: 451800
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============155==============
C0519(00)
Raw code: 451900
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============156==============
C051A(00)
Raw code: 451A00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============157==============
C051B(00)
Raw code: 451B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============158==============
C052B(00)
Raw code: 452B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============159==============
C052D(00)
Raw code: 452D00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============160==============
C052E(00)
Raw code: 452E00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============161==============
C053D(00)
Raw code: 453D00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============162==============
C0555(00)
Raw code: 455500
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============163==============
C0556(00)
Raw code: 455600
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============164==============
C0557(00)
Raw code: 455700
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============165==============
C0558(00)
Raw code: 455800
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============166==============
C055C(00)
Raw code: 455C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============167==============
C055E(00)
Raw code: 455E00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============168==============
C0560(00)
Raw code: 456000
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============169==============
C0563(00)
Raw code: 456300
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============170==============
C0564(00)
Raw code: 456400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============171==============
C0565(00)
Raw code: 456500
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============172==============
C056A(00)
Raw code: 456A00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============173==============
C056B(00)
Raw code: 456B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============174==============
C0594(00)
Raw code: 459400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============175==============
C0596(00)
Raw code: 459600
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============176==============
C0597(00)
Raw code: 459700
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============177==============
C1013(00)
Raw code: 501300
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============178==============
C101F(00)
Raw code: 501F00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============179==============
U0100(87)
Raw code: C10087
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, engine control module (ECM) A - no communication

============180==============
U0159(87)
Raw code: C15987
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, parking aid control module A - no communication

============181==============
U0214(00)
Raw code: C21400
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, remote function actuation - no communication

============182==============
U0253(87)
Raw code: C25387
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Lost communication with accessory protocol interface module

============183==============
U0315(00)
Raw code: C31500
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Software incompatibility - anti-lock brake system (ABS) control module

============184==============
U045A(56)
Raw code: C45A56
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Invalid data received from parking aid control module A

============185==============
U049C(00)
Raw code: C49C00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============186==============
U0515(82)
Raw code: C51582
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Invalid data received from remote function actuation

============187==============
U1027(00)
Raw code: D02700
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: SCP (J1850) Invalid or Missing Data for Engine RPM

============188==============
U1028(00)
Raw code: D02800
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: SCP (J1850) Invalid or Missing Data for Primary Id $1C

============189==============
U103B(00)
Raw code: D03B00
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============190==============
U2016(04)
Raw code: E01604
ECU: 7EE
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Signal Link Short to Ground (Non SCP) / From NGV Module
Ford: Signal Link Short to Ground (Non SCP)

============191==============
P01EB(96)
Raw code: 01EB96
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============192==============
P0607(00)
Raw code: 060700
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Engine control module (ECM) - performance problem

============193==============
P061A(92)
Raw code: 061A92
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Engine control module (ECM), engine torque - performance problem

============194==============
P061A(93)
Raw code: 061A93
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Engine control module (ECM), engine torque - performance problem

============195==============
P0C2F(92)
Raw code: 0C2F92
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Internal control module, drive motor/generator, engine speed (RPM) sensor - performance problem

============196==============
P0C2F(93)
Raw code: 0C2F93
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Internal control module, drive motor/generator, engine speed (RPM) sensor - performance problem

============197==============
P0CDF(13)
Raw code: 0CDF13
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============198==============
P0D6D(00)
Raw code: 0D6D00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============199==============
P0D6F(00)
Raw code: 0D6F00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============200==============
P0D71(00)
Raw code: 0D7100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============201==============
P0EE3(00)
Raw code: 0EE300
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============202==============
P0EE4(00)
Raw code: 0EE400
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============203==============
P0EE5(00)
Raw code: 0EE500
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============204==============
P2531(00)
Raw code: 253100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Ignition switch, ON position - circuit low

============205==============
P2533(1F)
Raw code: 25331F
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Ignition switch, ON/start position - circuit malfunction

============206==============
P2533(62)
Raw code: 253362
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Ignition switch, ON/start position - circuit malfunction

============207==============
P2611(00)
Raw code: 261100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: AC refrigerant distribution valve - open circuit

============208==============
P2612(00)
Raw code: 261200
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: AC refrigerant distribution valve - circuit low

============209==============
P2613(00)
Raw code: 261300
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: AC refrigerant distribution valve - circuit high

============210==============
P26FD(00)
Raw code: 26FD00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============211==============
P2C95(00)
Raw code: 2C9500
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============212==============
P2D40(00)
Raw code: 2D4000
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============213==============
P2D41(00)
Raw code: 2D4100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============214==============
P2D42(00)
Raw code: 2D4200
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============215==============
P2D44(00)
Raw code: 2D4400
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============216==============
P2DA4(00)
Raw code: 2DA400
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============217==============
P2DA5(00)
Raw code: 2DA500
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============218==============
P2DA6(00)
Raw code: 2DA600
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============219==============
P2E62(00)
Raw code: 2E6200
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============220==============
P2E63(00)
Raw code: 2E6300
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============221==============
P2E64(00)
Raw code: 2E6400
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============222==============
C0047(00)
Raw code: 404700
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Brake Booster Pressure Sensor

============223==============
C0048(00)
Raw code: 404800
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Brake Booster Travel Sensor

============224==============
C004D(00)
Raw code: 404D00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============225==============
C0051(00)
Raw code: 405100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Steering Wheel Position Sensor

============226==============
C0063(00)
Raw code: 406300
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Yaw Rate Sensor

============227==============
C0064(00)
Raw code: 406400
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Roll Rate Sensor

============228==============
C006C(00)
Raw code: 406C00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Stability System

============229==============
C0072(00)
Raw code: 407200
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Brake Temperature Too High

============230==============
C05A4(00)
Raw code: 45A400
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============231==============
C05CC(00)
Raw code: 45CC00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============232==============
C113A(62)
Raw code: 513A62
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============233==============
B3A01(00)
Raw code: BA0100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============234==============
B3A02(00)
Raw code: BA0200
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============235==============
B3A03(00)
Raw code: BA0300
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============236==============
U0001(00)
Raw code: C00100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Controller area network (CAN) data bus, high speed bus

============237==============
U0103(00)
Raw code: C10300
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, gear shift module - no communication

============238==============
U010F(00)
Raw code: C10F00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: AC control module - communication signal lost

============239==============
U0126(00)
Raw code: C12600
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, steering position sensor control module - no communication

============240==============
U0131(00)
Raw code: C13100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, power steering control module - no communication

============241==============
U0140(87)
Raw code: C14087
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, body control module (BCM) - no communication

============242==============
U0143(00)
Raw code: C14300
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, body control module (BCM) C - no communication

============243==============
U0151(00)
Raw code: C15100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, supplementary restraint system (SRS) control module - no communication

============244==============
U0151(87)
Raw code: C15187
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, supplementary restraint system (SRS) control module - no communication

============245==============
U0155(00)
Raw code: C15500
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, instrumentation control module - no communication

============246==============
U0164(00)
Raw code: C16400
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, AC control module - no communication

============247==============
U016A(00)
Raw code: C16A00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Lost communication with navigation control module

============248==============
U0198(00)
Raw code: C19800
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Data bus, telematics control module - no communication

============249==============
U0288(87)
Raw code: C28887
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Lost communication with DC to AC converter control module A

============250==============
U0298(00)
Raw code: C29800
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Lost communication with DC to DC converter control module A

============251==============
U0401(00)
Raw code: C40100
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Invalid data received - engine control module (ECM)

============252==============
U0420(00)
Raw code: C42000
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Invalid data received - power steering control module

============253==============
U0452(00)
Raw code: C45200
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
OBDII: Invalid data received from supplementary restraint system (SRS) control module

============254==============
U063B(87)
Raw code: C63B87
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============255==============
U069E(81)
Raw code: C69E81
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============256==============
U069E(87)
Raw code: C69E87
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============257==============
U1011(86)
Raw code: D01186
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: SCP (J1850) Invalid or Missing Data for Engine Air Intake; SCP (J1850) INVALID OR MISSING DATA

============258==============
U1012(86)
Raw code: D01286
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle
Ford: SCP (J1850) Invalid or Missing Data for Primary Id $0C

============259==============
U301B(00)
Raw code: F01B00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============260==============
U351B(00)
Raw code: F51B00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============261==============
U351F(00)
Raw code: F51F00
ECU: 7EF
Status: Test not completed since last DTC clear, Test not completed during this operation cycle

============262==============
U0293(00)
Raw code: C29300
ECU: BECM[Archive (inactive)]
Status: Test failed since last DTC clear
OBDII: Lost communication with hybrid powertrain control module

============263==============
U019B(00)
Raw code: C19B00
ECU: BECM[Archive (inactive)]
Status: Test failed since last DTC clear

============264==============
P1A43(00)
Raw code: 1A4300
ECU: BECM[Archive (inactive)]
Status: Test failed since last DTC clear

============265==============
P1A42(00)
Raw code: 1A4200
ECU: BECM[Archive (inactive)]
Status: Test failed since last DTC clear

============266==============
B115E(97)
Raw code: 915E97
ECU: CMR
Status: Pending, Confirmed

============267==============
B15E1(97)
Raw code: 95E197
ECU: CMR
Status: Pending, Confirmed

============268==============
B15E2(97)
Raw code: 95E297
ECU: CMR
Status: Pending, Confirmed

============269==============
P0D5C(00)
Raw code: 0D5C00
ECU: SOBDM (BCCM)
Status: Test failed (current drive cycle), Confirmed, Test failed since last DTC clear

============270==============
P0D80(00)
Raw code: 0D8000
ECU: SOBDM (BCCM)[Archive (inactive)]
Status: Test failed since last DTC clear

Considering you have had hvjb replacement, it makes me wonder if that is truly the root cause as Ford claims.

Are you pursuing a buyback and payment for trip interruption costs?

 

[Capt_Everything]

Considering you have had hvjb replacement, it makes me wonder if that is truly the root cause as Ford claims.

Are you pursuing a buyback and payment for trip interruption costs?

Honestly don't even know.

** Update **

After eating cracker barrel I returned to the car without the bars of bordem.

*Question?*

Is the thermal management so poor that because of continuous drive cycles on a road trip using DC fast charging and then an overnight L2 charge the battery (or subcomponents) were in a perpetual state of high temps that power becomes irrecoverable until such time the car sits for an hour not charging and fully powered down?

If so, poor design, if not I wonder what it could be and if it will reappear.

Odd.

* Keep in mind, even earlier in my trip I baby'd the power to get max range and not through all my luggage around in this packed out wagon.

 

[Gimme_my_MME]

If the was an issue with that L2 charger it could've caused all of that. What kind of charger was it?

 

[SnBGC]

If the was an issue with that L2 charger it could've caused all of that. What kind of charger was it?

That shouldn't make any difference. The charger is in the car but of course you are well aware of this.
Perhaps you are curious what the amp setting might be? That would be interesting to know. If a public L2 then most are around 6.6 kW or less.

 

[Mach-Lee]

OK, first of all you're not in turtle mode, your title is misleading. If you're in turtle mode there will literally be an orange turtle icon on the display and you'll only be able to go about 5 MPH. You just have a power limit applied. Your car wasn't even stranded, it could still drive 70+ MPH just fine. I don't understand the doom and gloom post here.

You also typed the code wrong, it's P0D5C - Battery Charger Hybrid/EV Battery Output Power Performance (This DTC sets when the SOBDM output power is less than expected by a calibrated threshold for 5 minutes.) This could be because of a faulty L2 EVSE like gimme said, or because you have an issue with the on-board charger. Try another L2 charger and see if you still get the error. Could just be a one-time occurrence due to a bad public charger.

The limit bars showing up was probably just a precaution because of the charging error. They went away after the car sat a while, so it's probably operating as designed.

Last, posting a gazillion frivolous codes from Car Scanner isn't really helpful either, and a pain to scroll through. I suggest using FORScan instead of Car Scanner which will only show real codes.

 

[JimmyMachE]

What was the battery pack temperature in Car Scanner when the power limit occured?

 

[Capt_Everything]

What was the battery pack temperature in Car Scanner when the power limit occured?

Never got that data pulled. Haven't driven it since. Been traveling like crazy for work.

Sponsored