Favorite FITS 3D Printed Accessory for the Frunk?

[Mark Hassa]

I'm looking into making something for the two FITS anchor points in the Frunk. What has been the most popular?
What design works best?

Sponsored

 

[garyd9]

Really hard to answer "what design works best." The best design is the one that serves your purpose(s.)

Here's what I'm using for one of them to hold my lectron NACS adapter:
https://www.printables.com/model/1077522-mach-e-nacs-adapter-holster-v2

 

[Mark Hassa]

Really hard to answer "what design works best." The best design is the one that serves your purpose(s.)

Here's what I'm using for one of them to hold my lectron NACS adapter:
https://www.printables.com/model/1077522-mach-e-nacs-adapter-holster-v2

I got the Tesla issued one. Curious if that would work?

 

[garyd9]

I got the Tesla issued one. Curious if that would work?

I think it would work with any NACS adapter due to the way it plugs in

 

[WallyS56]

I think it would work with any NACS adapter due to the way it plugs in

It will.

 

[HughJazzol]

This is sexy and awesome as hell.
But doesn't the weight of the adapter eventually cause it to fall down? How does it stay taught on there?

 

[RickMachE]

This is sexy and awesome as hell.
But doesn't the weight of the adapter eventually cause it to fall down? How does it stay taught on there?

It's locked in with the adapter clip...

 

[HughJazzol]

I'm intrigued, captivated, and dazzled.

How would one get one of these if one wanted one, but doesn't own one 3d printer?

 

[pikepilot]

I might be wrong but I think not all Frunks have the slot for the above holsters to clip into. I seem to remember getting ready to print and noticing my Frunk didn't have the slots. Wife has car, can't check right now.

 

[AtomicInternet]

I confirmed it's on the 2021-2024 as well as the 2025. Would be a very odd one-off to not have the FITS anchors in the frunk.

 

[Mark Hassa]

I confirmed it's on the 2021-2024 as well as the 2025. Would be a very odd one-off to not have the FITS anchors in the frunk.

2021 models dont have them. I think it was 23 onwards, but I might be wrong

 

[scott_77]

https://www.macheforum.com/site/thr...for-center-console-3d-print.41476/post-927649

 

[WallyS56]

I'm intrigued, captivated, and dazzled.

How would one get one of these if one wanted one, but doesn't own one 3d printer?

Use the link above to download the pattern to a 3-D printer. My neighbor printed mine.

 

[HuntingPudel]

2021 models dont have them. I think it was 23 onwards, but I might be wrong

Not positive on 2023s, but for sure 2024s have the redesigned frunk tub. I thought that was one year only. The redesigned tub is lighter and is held in by fewer fasteners than the 2021 tub (which doesn ot have FITS sockets). ??

 

[HughJazzol]

Use the link above to download the pattern to a 3-D printer. My neighbor printed mine.

Walter
Can you introduce me to your neighbor? I'll bring stone crabs

Sponsored