Anyone mount their front license plate using Sto N Sho bracket?

[Cabel]

Do you have a picture of how it turned out? I live in MD as well and am considering this.

SWO,

So far, so good....

You need to be right on top of it to see that it isn't a real plate. I've been told that the only "giveaway" may be the lack of bolt heads, but it is an option to have those printed onto the vinyl if you like.

Sponsored

 

[SWO]

SWO,

So far, so good....

You need to be right on top of it to see that it isn't a real plate. I've been told that the only "giveaway" may be the lack of bolt heads, but it is an option to have those printed onto the vinyl if you like.

Nice. Wave if you see a Star White 4x select near Severna Park. GT shows up sometime before Thanksgiving, hopefully

 

[Seriously]

I went with the Sto N Go Front Plate holder: https://stonsho.com/front-license-plate-for-2021-2022-ford-mach-e-gt-sns279a/

I installed it myself and it was pretty easy. I bought a low profile black frame that blends well with the styling and I didn't need to modify it. I installed it "as is" and didn't have any issues with sensors or the bolts that came with, etc.

 

[PJS3]

SWO,

So far, so good....

You need to be right on top of it to see that it isn't a real plate. I've been told that the only "giveaway" may be the lack of bolt heads, but it is an option to have those printed onto the vinyl if you like.

That is absolutely freaking perfect! I do hope I can get the same!

 

[carinquiryad]

Just a few questions on these for the Mach E Premium model:

Are these meant for (more or less) permanent usage or just for inspections etc? I would like to keep them on most of the time, so wanted to ask.

Do these stay one fine at highways speeds? (65-70mph)

Any interference with the sensors?

 

[carinquiryad]

SWO,

So far, so good....

You need to be right on top of it to see that it isn't a real plate. I've been told that the only "giveaway" may be the lack of bolt heads, but it is an option to have those printed onto the vinyl if you like.

Hi - how has this worked for you in the last 6 months? I am thinking of taking this route (I live in NH).

 

[Cabel]

It hasn't faded or fallen off, so still good. Several of my buddies have jad these vinyl plates on their classic British cars going on 6-7 years now; it is where I got the idea.

 

[Sweepersan]

Can someone please tell me what bracket that is on MKHuffman's MME?

 

[mkhuffman]

Can someone please tell me what bracket that is on MKHuffman's MME?

Sto-n-sho.

 

[Sweepersan]

Thank you kindly.

 

[Auto Motive]

The dealer did not install the front license plate bracket. I'm looking for alternatives where I do not have to drill into the front bumper. I saw the Craig solution and am concerned about the tape failing and running over my license plate & bracket. I found the Sto N Sho brackets (https://stonsho.com/compare/646/633) , and wanted to know if anyone used them? Also, if anyone found another bracket that could be mounted off center?

Industrial velcros tape will work. Try 3m. We dont need the plate in front in pa.

Sponsored