BSKT Ultimate Project Technical review

[Mustang-Vader]

After thorough internal discussion and feedback regarding the wiring setup connected to the vehicle’s AC unit, we have now produced an updated installation video for the Mustang Mach-E Light Up Pony ultimately edition from BSKT Design.

In the original version of the guide, the section involving the AC unit wiring created unnecessary confusion for several installers, as it introduced steps that were either misinterpreted or not required for the standard installation process. While the intention was to demonstrate a complete overview of possible connection points, it became clear that this portion of the video did not contribute positively to clarity or ease of installation and would potentially ruin many ponies over time.

To improve the overall user experience and ensure a more streamlined and accessible installation process, we have now removed this segment entirely in the revised video. The updated version focuses solely on the essential installation steps required for fitting the Mustang Mach-E Light Up Pony ultimate edition, ensuring that users can follow a clean, precise, and easy-to-understand workflow without distractions or ambiguous instructions.

This adjustment reflects our ongoing commitment to improving product support materials based on real world user feedback. By simplifying the guidance and eliminating potentially confusing elements, we aim to make the installation process more intuitive, efficient, and confidence, inspiring for both first time users and experienced installers alike.

The new video maintains a strong emphasis on clarity, visual demonstration, and step by step instruction, allowing users to complete the installation smoothly while avoiding unnecessary technical complications.

sincere
Supervisor engineer
BSKT Design
Jannick

Sponsored

 

[Carma]

Installed rear pony today. Thanks to BSKT and IgorKi for passing the pony along to me! Install was pretty easy with a good heat gun for emblem removal and the clever plug and play wiring harness.
Now i guess I will be ordering the front pony!

 

[GOZ_028]

Bought the front pony, went to put it on and stupid me, I laid the plastic bag with the star washers on the fender and then went into the house to grab something, came out, no star washers. I am presuming the wind took them, but I cannot find them anywhere.

Can someone tell me what size these are and maybe best place to get the replacements ??

 

[markboris]

Bought the front pony, went to put it on and stupid me, I laid the plastic bag with the star washers on the fender and then went into the house to grab something, came out, no star washers. I am presuming the wind took them, but I cannot find them anywhere.

Can someone tell me what size these are and maybe best place to get the replacements ??

I can send you some if you want. Unfortunately they won't go out until tomorrow and you won't get them until next week probably Wednesday because of the holiday. I forget the size but will find that info for you within the next 24 hours.

Edit: will let you know tomorrow morning the size

 

[GOZ_028]

I can send you some if you want. Unfortunately they won't go out until tomorrow and you won't get them until next week probably Wednesday because of the holiday. I forget the size but will find that info for you within the next 24 hours.

Edit: will let you know tomorrow morning the size

Appreciate it Mark. Just knowing the size will get me there, I can get them pretty quickly.

 

[markboris]

Appreciate it Mark. Just knowing the size will get me there, I can get them pretty quickly.

The speed nuts are 5/32". Like I said, if you have issues finding them, I can send you some.

Our nearby Wilco and Ace Hardware have them. Lowe's and Home Depot did not.

 

[GOZ_028]

Thank you sir, you are the GOAT on this forum, IMHO.

 

[GOZ_028]

Installed... was actually really easy other than losing the push nuts. Hardest part was getting the hot glue off the other pony (yes, previous owner hot glued all 4 posts, obviously had the front end apart as it was very well done).

Sponsored