New APIM/TCU/GMA updates

[FME]

Will they come OTA or need to go back to the dealer?

Sponsored

 

[dfcliff]

Will they come OTA or need to go back to the dealer?

The HVAC probably won't come OTA, but it might. The others should eventually bi in a OTA update. I haven't figured out what the change is yet. If you are going to get the 21G01 at the dealer, they will probably do them (except HVAC). If you've already had the 21G01 (and it's working) they won't want to do them unless a future TBS or CSP calls for them.

 

[dfcliff]

I just finished updating mine. No hiccups and everything installed smoothly.

 

[RickMachE]

I was current as of Friday morning...

How long did these take?

 

[RickMachE]

If OTA worked, these modules should flow to an updated vehicle this week.

 

[generaltso]

I was current as of Friday morning...

How long did these take?

About 45 minutes for everything.

 

[dfcliff]

If OTA worked, these modules should flow to an updated vehicle this week.

I would assume that they are still EA.

 

[dfcliff]

I was current as of Friday morning...

How long did these take?

It took me a little over an hour.

 

[FME]

The HVAC probably won't come OTA, but it might. The others should eventually bi in a OTA update. I haven't figured out what the change is yet. If you are going to get the 21G01 at the dealer, they will probably do them (except HVAC). If you've already had the 21G01 (and it's working) they won't want to do them unless a future TBS or CSP calls for them.

I did get 21G01 and BC works but it’s not showing up in Connected Services.

I have a case number to have it looked at and thought I would have them do the HVAC update, then all these others showed up today. I’ll try and get them to do them all.

Thanks

 

[dfcliff]

I did get 21G01 and BC works but it’s not showing up in Connected Services.

I have a case number to have it looked at and thought I would have them do the HVAC update, then all these others showed up today. I’ll try and get them to do them all.

Thanks

It took almost a week before BC showed up in my connected services after I installed the original 21G01.

I can’t imagine that the HVAC module would have anything to do with BC.

 

[FME]

It took almost a week before BC showed up in my connected services after I installed the original 21G01.

I can’t imagine that the HVAC module would have anything to do with BC.

Interesting…

Maybe it’s a good time to wait. They just unstuck 1.7.1 and did all the updates except HVAC.

I think I’ll wait to see if any updates come OTA. That way I know it’s finally working, and then see if BC shows up in the Connected Services

Thanks

 

[Gullwingdmc]

Updates are done (APIM, HVAC, GWM, and TCU). Nothing blew up.

Old Sync Version:

New Sync Version:

No obvious changes (yet).

Any sign of a frunk button?

 

[generaltso]

Any sign of a frunk button?

None.

 

[benk016]

These are the re-release of the updates for BC. I don't think there is anything changed user facing.

Hopefully it will help with the issues of BC not activating after all the updates.

These will show up for everyone that has already gone through the updates even if BC activated. And hopefully cars that haven't updated yet will get it activated on the first try.

 

[walla2]

Will be curious whether this will give the Apple Maps routing feature to my Job2. I haven’t been on one of the designated Sync versions before, but I notice @generaltso jumping from 22034 (which does support it, per ford’s notes here) to 22095.

I’m blanking on my Job2’s current version, and I’m too lazy to run down from the hotel room at the moment - but it’s neither of these - and I’d really like the apple maps routing…

Sponsored