bswiftly
New Member
- Joined
- Sep 14, 2023
- Threads
- 1
- Messages
- 2
- Reaction score
- 0
- Location
- Calgary, Canada
- Vehicles
- MachE GTP
- Thread starter
- #1
I think I got the fuses right. I followed a to guide YouTube and cross referenced two guys that did an install.
Fuse 3 was used for ACC and 13 for "battery" power.
I grounded on the bolt shown.
I tested on another USB source and it powered on, but not with the hard wire module.
I moved the fuses around and tried them in the opposite position in case I got them backwards but nothing.
At some point when removing and reinstalling them I got a notification on my phone saying the "restraints control module" had a fault.
Not sure what to test or how to debug this.
Hopefully the photos show the fuses clearly enough.
Any ideas?
Fuse 3 was used for ACC and 13 for "battery" power.
I grounded on the bolt shown.
I tested on another USB source and it powered on, but not with the hard wire module.
I moved the fuses around and tried them in the opposite position in case I got them backwards but nothing.
At some point when removing and reinstalling them I got a notification on my phone saying the "restraints control module" had a fault.
Not sure what to test or how to debug this.
Hopefully the photos show the fuses clearly enough.
Any ideas?
Sponsored
