Forscan question

[MajsterkoV]

TCU Cost on Polish Allegro about 550 eur . I have bought right lamp in Lithuania on Ovoko for 340eur, Also i have tried updating mache with VCM 2 copy from china manage to start dowloading updates aand then Ford VDRS stoped responding and i did that 3 times

Sponsored

 

[rugedraw]

TCU Cost on Polish Allegro about 550 eur . I have bought right lamp in Lithuania on Ovoko for 340eur, Also i have tried updating mache with VCM 2 copy from china manage to start dowloading updates aand then Ford VDRS stoped responding and i did that 3 times

Quit now before you mess something up. You should not be using anything cheaper than a Mongoose cable. If you continue to try to update the modules with that Chinese cable, you will brick something.

 

[MajsterkoV]

Its not cable fault but poor ford accesability in Europe most of thimes when i try to do something it doesnt want to connect to ford servers

 

[rugedraw]

Its not cable fault but poor ford accesability in Europe most of thimes when i try to do something it doesnt want to connect to ford servers

I agree that FDRS does not work well outside the US. It doesn't work well inside the US sometimes, too. However, I am not going to try to convince you or anyone to not use those cheap cables. Do whatever you want, just remember that you were warned.

 

[MajsterkoV]

Cheap chineese cabel cost me like 100 usd max withs i 4 times more that for me so its better option that spending 1/20 what i paid for mach e on cable from usa

 

[MajsterkoV]

I will also try VXDIAG NANO

 

[EgiszZ]

Could you write me what to change to have road sign recognition and speedometer in kmh I have allready got a ticket first time driving on street 50mph in 50kmh zone sooo...

Try these:

0720-03-01

Fxxx

xxxx

xx--

Speedometer Cal (SC) - Europe

0720-03-01

x1xx

xxxx

xx--

• Intelligent Speed Assistance (ISA) - Enabled

0720-03-02

xx8x

xx--

8 = TSR enabled • TS disabled • TBS disabled • TSP disabled

Country code - not sure if this is needed.

0720-04-02

****

xx--

Language Country Code (LCC) - 4C48 (LT)

0720-07-01

xxxx

x3xx

xx--

3 = Nav Speed Sign (NSS) - ROW

706-01-01

xx3x

xxxx

xx--

Show sign to not overtake:

706-04-01

05xx

xxxx

xx--

05 = MCDS Right Hand Traffic • U Unused • MCR Eu • MCSLSU KPH

706-04-01

xxx1

xxxx

xx--

1 = MCC Europe

 

[EgiszZ]

I managed to turn back kmh speedometer while APIM country code set to Lithuania (or PL).
To do so, you need to temporary change back to US code 5553, then set in APIM screen, Vehicle settings change turn option "show speed in kmh" ON. Now you can change APIM country code back to whatever you want. IPC remain with big kmh / small mph

I also noticed that if later you make any change to IPC as built, then it will mess up again and you have to repeat procedure to get back kmh to you dash.

This is only workaround I found working by now. If someone kows better, let us know .

 

[Chapron]

Is ist possible to have US UI and US English language in a german mach e? I can Switch to UK English but it does not sound like US.

 

[MajsterkoV]

Pretty sure u can, but i think only if u change country code to us

 

[Chapron]

I am not sure if it needs to download US content out of the cloud as it is not part of the Language pack in germany.

 

[Chapron]

Another question: when I use the precondition funktion with a timer or remote via the app the front and rear lights get acticated as well. That does not makes sense and only draws attention to the car when activated while the car ist parked on the street. Can this be changes so the the lights do not get turned on?

 

[MajsterkoV]

I dont know u should check forscan worksheet or ask on main forscan topic

Sponsored