You should be able to use a 12v power supply and attach the white and red wires to the positive, black to negative.
Something like this?
I would think that would work. I can’t imagine this draws more than 2 amps.
Just use a 12v battery and hold the black to the negative and the red and white to the positive terminal. Ask a friend with an exposed battery if you dont have one.
It takes a few seconds to light up so don't give up too soon.
I just tested mine with an almost identical power supply to that that I had lying around and it lit up just fine. Seems as though I got the OG one and not the better diffused/warmer one selected in the survey.
I'm thinking the Asian market Mach-Es may support plug and play. Not sure what is there to plug and play on the USDM and EUDM Mach-Es.
You're probably right. In theory, it could use a pass-though plug that goes inline with one of the headlights. But the plug in the picture looks too small for that.
I wish it were that easy. That's been one of the challenges with this pony kit created by John. Most newer models/trims lost the turn-on wire from the headlight connector bundle, which requires a run directly to the BCM.
Is the ground wire an issue?
I bought a little 12v Enegizer battery and I was able to get it to light up. Took a little patience but it was easy enough.
Uh, that’s not a Duracell.I bought a little 12v Duracell battery and I was able to get it to light up. Took a little patience but it was easy enough.
Whoops. Correction made.
The Bunny rules.
