Side GT badge

[Mach1E]

Anyone else wish the side badges were different for the GT?

Seems all the other models have a special badge but us.

I’m kinda considering getting rid of the 4X badge and using the select RWD badge and putting GT after it. Just not sure how it would look. Anyone good with photoshop for a DMG GTPE?

Sponsored

 

[2FlyMache]

I took mine off. They're just plastic and break easily

 

[TheSleepyDad]

The Chinese MMEs have a side GT badge. Maybe you could source that.

 

[Scooby24]

I like those side GT badges!

 

[Murse-In-Airy]

Maybe someone with a 3D printer can make a GT badge for the side. I’d love a 0.0 badge as well. Just to flex my displacement.
I’m going to reach out to this person’s Etsy store:
Side badge

 

[MMXX500]

How about these?

https://www.ebay.com/itm/1921755218...kTXMd8gkuIYdAT3qBkUW|ampid:PL_CLK|clp:2047675

 

[Scooby24]

How about these?

https://www.ebay.com/itm/192175521822?_trkparms=amclksrc=ITM&aid=1110006&algo=HOMESPLICE.SIM&ao=1&asc=237166&meid=3b5b02bc2e9b49df91f71eef19307b6b&pid=101195&rk=1&rkt=12&sd=191704854071&itm=192175521822&pmt=1&noa=0&pg=2047675&algv=SimplAMLv9PairwiseWebMskuAspectsV202110NoVariantSeedWithWeightedSampleMeHot&_trksid=p2047675.c101195.m1851&amdata=cksum:1921755218223b5b02bc2e9b49df91f71eef19307b6b|enc:AQAGAAACMJWX7oaqfIPUHU0VF9nhVEFCNUxsY91L1muGNkjTh7zOlzSZKlCBoHpcBa77mrNz49bZvt5sllMhN7GHH%2F3JY6mx%2BJcTJrAJC%2FOEfJg7SH%2BNJl%2FjXFPCVVLpFcvksImcfQAi5BC1gkbsoK3V0cV4sVoUXM87kb7WnBm7V0RxTibaKAxwpJRk%2BZ1Co0HAqCBIqSqx8406cs9HJ3NzwTi9zbaA%2BtYdF1OJJLBez1eTnpWygmcfUcY9BspW1PwV%2F%2B8SbFK%2FyGH9xsRyeu1Q7IKwiFvnhcBbM%2BaA4ZBmXQS%2BF%2FT9UJa4%2BWli8ltqOrLV4rqEzxLF2HAI4pfNVO6QmNA7ggmvQi0bEAClj50L8aPUJTMUh0CkJqiJvULZetCCmvGqLklQ8uPzjwRdNjy%2FcmKVuoexMbLJ%2BC0BMjuJdoC0SCPcStxS6IpKVbF2E0B4Y0APu330mhtNTs64pMGwXtix57wLSSPTS6Tsk76r40ZZMCM%2FavxCHXqWrmKWuWKp7V4QXEXNLzkBnJYQAJKIu30KuKpcwwt54rGaMUPMTyfCp%2FINtH7ttdR%2BuXcPxWOYsz9lfns9ovQwOZlSrtNqtGzysAxMbCpuuvKEETbHpzBVe92LG0M9cLswKlVResolu1KrP0QoTsC1h5chbjaWUdhSZd26M8xEprQE8Q%2F3AFVBAMrILGLwXsLg3Xi2jfcSPPlD28y3geq2cZ6iSbQZOvdIho9gkTXMd8gkuIYdAT3qBkUW|ampidL_CLK|clp:2047675

You'd have to dremel down the nub from the back to be lower than the tape. I like the gloss black.

https://www.ebay.com/itm/3711605577...efaultOrganicWeb&_trksid=p2047675.c101224.m-1

Sponsored