The Instrument Panel is very sluggish

[Chuck]

I've owned my MME since April of 2021. I've had very little issues with it.

I've noticed over the last few weeks the Instrument Panel is very sluggish. Two examples:

1. When I turn on the turn signal the clicking sound works as normal but the turn arrow on the IP stays on for about 5 seconds then off for a few seconds then on again. There seems to be no pattern as to the length of time it is on or off but it certainly out of sync with the clicking sound.

2. The speedometer is similar to the turn signal. The speed is sometimes frozen on one speed even though I'm accelerating. It might show 18 mph then jump to 32 mph. This is not good.

This issue is not happening all the time but I can't seem to find a pattern as to why it's happening or what is causing it.


I haven't received any updates since April (except the Blue Cruise "downgrade" from 1.4 to 1.3) so I don't think it's a software issue. Could it be a hardware module. Is this a "take it to the dealer for a week" thing?

Sponsored

 

[MadMatt]

Don't have any useful info for you other than to disconnect/reconnect the 12v for 1-2 minutes to force a proper reboot, ya know the whole "did you turn it off and back on again?"

On a similar note I've owned a 2024 for about 3 weeks now and the screen performance is about the only thing that bugs me about the car. In the age of iPhone's with 120hz screens you telling me Ford couldn't install a powerful enough processor for the screen animations and transitions to be smooth? I'm willing to bet it would of cost something along the lines of 40-50$ more per vehicle at a production cost level.

If there was ever an upgrade possible it is something I would consider.

 

[Deleted member 19354]

I've owned my MME since April of 2021. I've had very little issues with it.

I've noticed over the last few weeks the Instrument Panel is very sluggish. Two examples:

1. When I turn on the turn signal the clicking sound works as normal but the turn arrow on the IP stays on for about 5 seconds then off for a few seconds then on again. There seems to be no pattern as to the length of time it is on or off but it certainly out of sync with the clicking sound.

2. The speedometer is similar to the turn signal. The speed is sometimes frozen on one speed even though I'm accelerating. It might show 18 mph then jump to 32 mph. This is not good.

This issue is not happening all the time but I can't seem to find a pattern as to why it's happening or what is causing it.


I haven't received any updates since April (except the Blue Cruise "downgrade" from 1.4 to 1.3) so I don't think it's a software issue. Could it be a hardware module. Is this a "take it to the dealer for a week" thing?

My Sync screen lags. I do wish there was a CNTRL-ALT-DEL to reboot

 

[Maquis]

My Sync screen lags. I do wish there was a CNTRL-ALT-DEL to reboot

Volume down & right arrow.

 

[Deleted member 19354]

Volume down & right arrow.

I totally forgot that! I’ll give it a try

 

[Adventureboy]

disconnect/reconnect the 12v for 1-2 minutes to force a proper reboot

This is what I would try. It can be one of the modules in the background affecting the communication network. A proper reboot might just fix you up.

Sponsored