Since 6.4.0, wrong seat preset is selected

[JohnFoxeSheets]

This is odd, but ever since OTA 6.4.0 was completed, when I unlock the car the driver seat moves to my wife's seat position, even though my profile (which is associated with seat memory #1) is selected. If I then press the #1 button on the door, the seat moves into my position. I've tried removing my fob from my profile and re-linking it to my profile, but the problem continues. Meanwhile today my wife opened the car with her key and the seat didn't move to her seat position. It is very odd.

And if you're wondering if our fobs got swapped, I know for certain that they didn't because I have an F-150 Lightning fob with a frunk button, while she doesn't.

Any suggestions as to how to fix? I would pull the panels and disconnect the 12V to reset the models (or remove the appropriate fuses), but I can't since I'm still recovering from hand surgery...

Sponsored

 

[Tampamike]

Mine has always done that. I just press 1 and drive away. Technology, sometimes, is too hard to fix.

 

[JohnFoxeSheets]

Mine has always done that. I just press 1 and drive away. Technology, sometimes, is too hard to fix.

Weird

 

[IBGroggy]

Mine does it too. Drives me nuts. I've thought about removing my wife's profile. She's very persuasive so it remains and I just accept the fact that I get to get crushed then hit #1 and move on. I did have it go to the guest profile a couple of times too. It didn't used to do it, but I don't recall when it started happening. I'm thinking about a year ago. So first year and a half was blissful.

 

[PA27]

Mine started it yesterday after the update too. wife uses PAAK and have not tried it to see what it does Yet. Fobs are identical so may just swap since she doesn’t carry hers.

 

[PilotMark]

I have 2 profiles setup and I"ve selected to have the seat move all the way back upon exiting.
It should be all the way back when I get back in too.

Some times it works as expected.
But
many times it goes to my wifes (profile1) seat position and I can't really even get in.
I press 2 and then get in.
I've reset the fobs and the phones. still get an intermittent result.
Anything new in the last 2 years?

 

[JohnFoxeSheets]

I have 2 profiles setup and I"ve selected to have the seat move all the way back upon exiting.
It should be all the way back when I get back in too.

Some times it works as expected.
But
many times it goes to my wifes (profile1) seat position and I can't really even get in.
I press 2 and then get in.
I've reset the fobs and the phones. still get an intermittent result.
Anything new in the last 2 years?

I had the same issue up until the beginning of the year. I'm not sure what fixed it. (The way I addressed the problem when it happen was to press the door button for my profile so that I could get in.)

 

[PilotMark]

I'm doing the same. after opening the door I'm pressing 2 on the door to get the seat to my position.

Sponsored