dtbaker61
Well-Known Member
- First Name
- Dan
- Joined
- May 11, 2020
- Threads
- 126
- Messages
- 4,822
- Reaction score
- 4,525
- Location
- santa fe,nm
- Website
- www.envirokarma.org
- Vehicles
- MME (delivered 2/26/21), DIY eMiata BEV
- Occupation
- Solar Sales/install
- Thread starter
- #1
as I approached 36k miles and just passed 3 years of ownership.... I find myself wondering how long the 12v battery will perform adequately past 3-year warranty (assuming that your internal dc-dc and charging modules are working correctly to maintain the 12v battery).
[updated 6/4/24] - Be prepared to replace your 12v at 36mo, or shortly afterward. Things you may need to know so you don't get stranded:
https://www.macheforum.com/site/thr...r-12v-battery-recommended-at-36-months.36526/
I am hoping that the 12v batteries will last a LONG time since they are hardly ever 'deeply discharged' and never really have 'large loads' like turning over a starter motor. But, there is a risk of sulfation reducing capacity if you don't drive for months at a time or take only short trips that don't give time to fully charge the 12v and hold it at 100% for 'a while' to desulfate.
Our 12v batteries are probably hit the hardest by OTA downloads that last for 'a while' because the 12v battery cannot request a maintenance charge from HV during an OTA. If an OTA starts with your 12v at 80%, and it's a long OTA, it *could fail to finish* and leave your MME in a bad state, or even bricked in the 'inhibit' state.
Unfortunately, there is no absolute way to determine the state of health of your 12v battery.
At this point, I'd like to try and get some data from other owners willing to do some testing and log their results to this thread to see if we all can get a better idea of when it is time to replace the 12v.
----- 'leave-it-on' procedure to charge 12v to 100% ---------------
you will need an ODB2 reader, and an app like CarScanner to view 12v SOC%
In my last 12v charge session, the first 24 hrs brought my LV up to 95%, second 24hr got it up to 100%. After 'sleeping' overnight undisturbed with the MME OFF, and Bluetooth OFF, I turned the car and bluetooth on and checked LV SOC via carscanner in the morning, and it had dropped to 86%. I don't know how that would compare to a NEW battery, but it is a data point for how a 40 month old 12v battery is holding up.
This may be the only way to get an idea of 'effective capacity remaining'; knowing that new=35ah... and seeing if 'remaining capacity' sleeping overnight after 100% charge changes over time.
------------------------------------------------------------------------
At this point I highly recommend either using a 12v charger, or a variable power supply, or leaving your MME 'on' once a month or so to get the 12v up to 100%. I'd be very interested to see more data from other people showing:
Batt_AGE (12c aux batt days since reset), Time_to_100%, SOC%_after8hrs
800 days, 48 hrs, 86% -------- my last measurement, what's yours ?!
[updated 6/4/24] - Be prepared to replace your 12v at 36mo, or shortly afterward. Things you may need to know so you don't get stranded:
https://www.macheforum.com/site/thr...r-12v-battery-recommended-at-36-months.36526/
I am hoping that the 12v batteries will last a LONG time since they are hardly ever 'deeply discharged' and never really have 'large loads' like turning over a starter motor. But, there is a risk of sulfation reducing capacity if you don't drive for months at a time or take only short trips that don't give time to fully charge the 12v and hold it at 100% for 'a while' to desulfate.
Our 12v batteries are probably hit the hardest by OTA downloads that last for 'a while' because the 12v battery cannot request a maintenance charge from HV during an OTA. If an OTA starts with your 12v at 80%, and it's a long OTA, it *could fail to finish* and leave your MME in a bad state, or even bricked in the 'inhibit' state.
Unfortunately, there is no absolute way to determine the state of health of your 12v battery.
At this point, I'd like to try and get some data from other owners willing to do some testing and log their results to this thread to see if we all can get a better idea of when it is time to replace the 12v.
----- 'leave-it-on' procedure to charge 12v to 100% ---------------
you will need an ODB2 reader, and an app like CarScanner to view 12v SOC%
- turn MME 'on'
- disable 'auto-off' in vehicle>settings
- turn headlights 'off'
- turn HVAC 'off'
...and leave the car on until 12v SOC hits 100%. This may take a day, or two, or three! If you end up driving somewhere in the middle it doesn't matter. As long as you leave the MME on, and lock doors from outside if needed.
In my last 12v charge session, the first 24 hrs brought my LV up to 95%, second 24hr got it up to 100%. After 'sleeping' overnight undisturbed with the MME OFF, and Bluetooth OFF, I turned the car and bluetooth on and checked LV SOC via carscanner in the morning, and it had dropped to 86%. I don't know how that would compare to a NEW battery, but it is a data point for how a 40 month old 12v battery is holding up.
This may be the only way to get an idea of 'effective capacity remaining'; knowing that new=35ah... and seeing if 'remaining capacity' sleeping overnight after 100% charge changes over time.
------------------------------------------------------------------------
At this point I highly recommend either using a 12v charger, or a variable power supply, or leaving your MME 'on' once a month or so to get the 12v up to 100%. I'd be very interested to see more data from other people showing:
Batt_AGE (12c aux batt days since reset), Time_to_100%, SOC%_after8hrs
800 days, 48 hrs, 86% -------- my last measurement, what's yours ?!
Sponsored
Last edited: