How To: Get speedometer back in the middle of instrument cluster display (requires FORScan)

[Gullwingdmc]

looks awesome! Did lane change work fine?

Yup, worked perfectly!

Sponsored

 

[Gullwingdmc]

An update after a test drive today.
GOOD NEWS! Lane Departure still works!

What gets disabled is the display of it. I tested this by turning it on with the button on the wheel (you see no indication on the display that it’s on) then I tried to drift out of my lane (when no one was in the next lane). The wheel pulled me back and vibrated if I kept trying to leave the lane.

This is the perfect situation for me because the main reason I disabled the lane departure is to get the standard display back. Now I can have both. Also when turning cruise control/BlueCruise on I only have to hit the cruise button!

 

[Electric Goat]

An update after a test drive today.
GOOD NEWS! Lane Departure still works!

What gets disabled is the display of it. I tested this by turning it on with the button on the wheel (you see no indication on the display that it’s on) then I tried to drift out of my lane (when no one was in the next lane). The wheel pulled me back and vibrated if I kept trying to leave the lane.

This is the perfect situation for me because the main reason I disabled the lane departure is to get the standard display back. Now I can have both. Also when turning cruise control/BlueCruise on I only have to hit the cruise button!

I can confirm that this is what I experienced also... I still get the steering wheel vibration / rumble if I press the lane keep button before turning on cruise control.

 

[Gullwingdmc]

I can confirm that this is what I experienced also... I still get the steering wheel vibration / rumble if I press the lane keep button before turning on cruise control.

I was able to toggle it on and off on a side road and it seemed to work thankfully!

 

[shrky]

Thanks everyone for figuring this out! It’s silly, but it’s nice to have the centered speedo and animations back.

Everything is working on my 21 Job 1 the same as @Gullwingdmc ’s video shows. Lane keeping and BlueCruise work the same as before, only the car/bubble/lane display is disabled when BlueCruise/cruise control is off.

 

[Franky-Boy]

I have been reading this post for the past 48-72 hours and you guys have inspired me! Ordered the OBD Scan last night and should be getting it soon. Can't wait to have the speedometer back to the center and see the cool animation like before
@Gullwingdmc @Electric Goat and @Reicher89 for the post and questions. You guys rock! Thank you

 

[McSquashy]

I read in another thread that an IPC update is expected soon. If Ford doesn't fix the Speedo in this new update, I'm 100% going to FORScan it.

 

[Gullwingdmc]

I read in another thread that an IPC update is expected soon. If Ford doesn't fix the Speedo in this new update, I'm 100% going to FORScan it.

Which thread was that? I’d be curious to see the source.

 

[McSquashy]

Which thread was that? I’d be curious to see the source.

https://www.macheforum.com/site/threads/how-to-enable-power-meter-on-non-gt-mach-e.18783/post-905214

 

[Franky-Boy]

I have been reading this post for the past 48-72 hours and you guys have inspired me! Ordered the OBD Scan last night and should be getting it soon. Can't wait to have the speedometer back to the center and see the cool animation like before
@Gullwingdmc @Electric Goat and @Reicher89 for the post and questions. You guys rock! Thank you

Just completed the FORScan and I confirm that it works as expected Very happy to see the speedometer back in the center.
Removed the double honk of the horn too when we leave the car with the FOB or PaaK.

 

[CarGuy11]

IPC update is to fix the 1 mph at stop but hopefully this and fixing power meter jail bars too.

SSM 53115 2022-2023 Mustang Mach-E - Speedometer Stays At 1 MPH (1 Km/h) When The Vehicle Is Stopped
Some 2022-2023 Mustang Mach-E vehicles may exhibit the condition where the speedometer stays at 1 mph (1 km/h) when the vehicle is stopped. This may be due to the software in the instrument panel cluster (IPC). This condition does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition and will be released via a software update delivered over-the-air (OTA) expected in Q1 of 2025. Software will update automatically if vehicle connectivity is enabled in the vehicle’s settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in Q1 of 2025. Monitor OASIS for additional information.

 

[Gullwingdmc]

IPC update is to fix the 1 mph at stop but hopefully this and fixing power meter jail bars too.

SSM 53115 2022-2023 Mustang Mach-E - Speedometer Stays At 1 MPH (1 Km/h) When The Vehicle Is Stopped
Some 2022-2023 Mustang Mach-E vehicles may exhibit the condition where the speedometer stays at 1 mph (1 km/h) when the vehicle is stopped. This may be due to the software in the instrument panel cluster (IPC). This condition does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition and will be released via a software update delivered over-the-air (OTA) expected in Q1 of 2025. Software will update automatically if vehicle connectivity is enabled in the vehicle’s settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in Q1 of 2025. Monitor OASIS for additional information.

Hopefully this is the same software the 2024s got, and that 2021s will be included in that as well.

 

[GrayWolf]

SSM 53115 2022-2023 Mustang Mach-E - Speedometer Stays At 1 MPH (1 Km/h) When The Vehicle Is Stopped
Some 2022-2023 Mustang Mach-E vehicles may exhibit the condition where the speedometer

And of course Ford's documentation doesn't reflect the reality that this ALSO impacts the 2021 Model Year cars. Hopefully they do push this to everyone. Time will tell!

 

[Ssun0108]

요약:
1. IPC 값 720-02-01 xx*x xxxx xxxx를 0/4/8/C(차선 유지 지원 비활성화) 중 하나로 변경합니다.
2. 설정 변경 > 운전자 지원 > 충돌 전 지원 > 거리 표시를 OFF로 변경

면책 조항: 이것은 안전 기능을 끕니다. 본인의 재량에 따라 사용하세요. 이 변경 후 BlueCruise에 미치는 영향은 알 수 없습니다. 저는 그 기능을 사용하지 않기 때문입니다. 이 변경 후 스티어링 휠의 차선 유지 버튼은 아무 일도 일어나지 않습니다. 적응형 크루즈 컨트롤은 예상대로 여전히 작동하는 듯합니다.

---

안녕하세요 여러분! 새 2023년형 캘리포니아 루트 1을 정비하러 간 후, 그들은 여러 모듈을 업그레이드했습니다. PowerUp 6.8.0도 포함되었던 것 같습니다. 제 계기판이 여기에서 모두가 비난하듯이 가운데에 못생긴 차가 보이기 시작했거든요. 저도 싫어요. 아름다운 그래픽과 함께 가운데에 있는 속도계는 정말 좋고, 항상 선택할 수 있는 옵션이 되어야 합니다. @Ford Motor Company 이걸 옵션으로 만들어서 우리가 이걸 가지고 해킹하지 않아도 되게 해주세요.

어쨌든, 속도계를 다시 가운데로 되돌리는 수정/해결책을 찾았습니다. FORScan을 통해 차선 보조를 끄고 거리 표시를 꺼야 합니다. 개인적으로 차선 보조는 싫어요(적어도 보조 부분은요. 진동해서 경고를 하고 수동으로 수정할 수 있다면 상관없어요).

필요한 어댑터:
https://a.co/d/cSsgylc 또는 https://a.co/d/jeh2tPd

필요한 소프트웨어:
https://forscan.org/download.html

Mach-E FORScan 코드 스프레드시트:
https://www.macheforum.com/site/threads/forscan-mme-spreadsheet.24701/

절차:

1. IPC 값 720-02-01 xx*x xxxx xxxx를 0/4/8/C(차선 유지 지원 비활성화) 중 하나로 변경합니다.
2. 설정 변경 > 운전자 지원 > 충돌 전 지원 > 거리 표시를 OFF로 변경

0/4/8/C 중 원하는 값을 결정하려면 KIIWC와 DRLCF에 대해 이미 가지고 있는 값을 확인하세요...
예를 들어 다음과 같이 시작하는 경우:
A = KIIWC 활성화 • DRLCF 비활성화 • LA Full_LDW_LKA
변경하다
8 = KIIWC 활성화 • DRLCF 비활성화 • LA 비활성화

전에:

후에:

[/인용하다]
저도 시도해보고 싶습니다. 하지만 Forscan을 사용해본 적이 없어서 조금 두렵기도 합니다. 사용 방법이나 이 문제를 해결하는 방법을 친절하게 설명하는 영상이 있나요?

TLDR:
1. Change IPC value 720-02-01 xx*x xxxx xxxx to one of 0/4/8/C (Lane Assist Disabled)
2. Change Settings > Driver Assistance > Pre-Collision Assist > Distance Indication to OFF

DISCLAIMER: This turns off safety features, use at your own discretion. The effect on BlueCruise after this change is unknown as I don't use that feature. After this change, the lane assist button on the steering wheel does nothing. Adaptive cruise control appears to still work as expected.

---

Hey folks! After having my brand new 2023 California Route 1 in for a service, they upgraded a bunch of modules, I guess that included PowerUp 6.8.0 because my instrument cluster started showing the ugly car-in-the-middle as everyone's been bashing here. I also hate it. Love the speedometer in the middle with the beautiful graphics, and that should always be an option for us to choose. @Ford Motor Company PLEASE make this an option so we don't have to hack around this.

Anyways, I've found a fix/workaround to get the speedometer back in the middle. It requires turning off Lane Assist via FORScan and then turning off Distance Indication. I personally dislike Lane Assist anyways (or at least the assist portion, I don't mind if it vibrates to alert me and then I can manually correct).

Adapter required:
https://a.co/d/cSsgylc or https://a.co/d/jeh2tPd

Software required:
https://forscan.org/download.html

Mach-E FORScan codes spreadsheet:
https://www.macheforum.com/site/threads/forscan-mme-spreadsheet.24701/

Procedure:

1. Change IPC value 720-02-01 xx*x xxxx xxxx to one of 0/4/8/C (Lane Assist Disabled)
2. Change Settings > Driver Assistance > Pre-Collision Assist > Distance Indication to OFF

To determine what value you want 0/4/8/C, check what values you have already have for KIIWC and DRLCF...
e.g. if you're staring with:
A = KIIWC enabled • DRLCF disabled • LA Full_LDW_LKA
change to
8 = KIIWC enabled • DRLCF disabled • LA Disabled

Before:

After:

I would like to try it as well. However, I have never used Forscan before, and I’m a bit afraid. Are there any videos that kindly explain how to use it or how to fix this issue?

 

[GrayWolf]

Throwing a note into this thread to suggest to those who find this thread (or did so recently):

You might want to hold off on implementing the changes in this thread (with ALL THANKS to @Reicher89 for doing a truly outstanding job of sharing/documenting the needed alterations and the ramifications for doing so!).

It looks like Ford has the fix for this behavior "Coming Soon(tm)" to our cars, as seen here: https://www.macheforum.com/site/threads/ipc-25-7-46-update-on-2023-job-1-mach-e.46497/

My only question that I am thinking about: Should I roll the change to the IPC back to the "broken" state prior to my car getting this IPC update? It's definitely something to consider since not every update fully resets the database of settings, I have been told.

Sponsored