JSW
Well-Known Member
- First Name
- Jeff
- Joined
- Dec 15, 2020
- Threads
- 10
- Messages
- 311
- Reaction score
- 636
- Location
- Ann Arbor
- Vehicles
- Chevy Bolt; Porsche Boxster; Chevy Blazer; Jeep Wrangler
- Thread starter
- #1
My roof had subtantial wind noise.
When I drove a loaner MMe while my 12volt battery problem was being fixed, it became clear to me that my roof was generating way more noise than the loaner MMe (and my roof was much higher in relation to the windshield as well).
Based on feedback from others on the forum, my gap between the windshield and roof is larger as well (>3/16 of an inch).
I bought the product below from grainger and it reduced reduced the noise by 50-70%. My only issue is I may need a slightly larger product (probably 1/4 inch) if it is to stay in place long term.
When I drove a loaner MMe while my 12volt battery problem was being fixed, it became clear to me that my roof was generating way more noise than the loaner MMe (and my roof was much higher in relation to the windshield as well).
Based on feedback from others on the forum, my gap between the windshield and roof is larger as well (>3/16 of an inch).
I bought the product below from grainger and it reduced reduced the noise by 50-70%. My only issue is I may need a slightly larger product (probably 1/4 inch) if it is to stay in place long term.