The Complete DIY Guide to Updating Your Mach-E with FDRS
Bratapfl
Well-Known Member
- Joined
- Jan 13, 2022
- Threads
- 2
- Messages
- 61
- Reaction score
- 52
- Location
- Germany
- Vehicles
- MME AWD ER (Premium) built in April 2022
@rugedraw yes and no. I don't have any option for BlueCruise or predictive speed assist on the Screen.
Note that as a German, I haven't had BC before however in principle it's available here now.
I assume I'd have to toggle some variables of the IPMA in FORSCAN for the BlueCruise settings to appear, but don't feel the rush yet.
Note that as a German, I haven't had BC before however in principle it's available here now.
I assume I'd have to toggle some variables of the IPMA in FORSCAN for the BlueCruise settings to appear, but don't feel the rush yet.
Last edited:
rugedraw
Well-Known Member
- First Name
- Javier
- Joined
- Nov 13, 2023
- Threads
- 0
- Messages
- 2,633
- Reaction score
- 2,390
- Location
- Miami, FL
- Vehicles
- 2021 Ford F150 Platinum FX4 EB/2023 Bronco Sport Badlands/1991 Mustang 5.0 coupe
- Occupation
- Auto Sales
Strange that you are showing an IPMA and not a PSCM update as those are tied to each other. The IPMA will take 2.5-3 hours, but the rest I think are quick. You will not be able to do the BCM due to an NFTSA password requirement that the BCM has now.
So i am in for a looooong update round i guess ?
Also i do not see the sync update yet, so i guess i must update these first.
It is possible that once you plug the car into FDRS and do a scan, that more updates will release in terms of the Sync updates you mentioned.
chesteroberto
Well-Known Member
- First Name
- Rob
- Joined
- Feb 12, 2023
- Threads
- 9
- Messages
- 129
- Reaction score
- 94
- Location
- Bluffton, SC
- Vehicles
- 2021 Ford Mustang Mach-E Premium
Since my last FDRS update session in early August, I've had a GVMS Warning for the ABS module, which hasn't been updated since April. At the time the GVMS Warning appeared, I opened a case, but I don't have access to PTS, so I've never been able to review the status of the case. However, the warning still exists.
Is this something I should be concerned about? How can I get this resolved, or is it just a waiting game?
Is this something I should be concerned about? How can I get this resolved, or is it just a waiting game?
3FMTK3RM1MMA56588
|
Arjan
Well-Known Member
- First Name
- Arjan
- Joined
- Feb 14, 2020
- Threads
- 6
- Messages
- 360
- Reaction score
- 241
- Location
- NL
- Vehicles
- Ford Mustang Mach-E GT Performance
IPMA update took 90 minutes, before i started i got an firmware update on my mongoose.
Would not recommend the path i took with the 30 Amps power supply, but it got the job done. I was down at 11.3 Volt....
BCM is running now without issues.
PSCM is nowhere to be found
Last edited:
MajsterkoV
Well-Known Member
- First Name
- Bartek
- Joined
- Jul 15, 2024
- Threads
- 8
- Messages
- 53
- Reaction score
- 5
- Location
- Poland
- Vehicles
- MME 21 Premium Iced Blue , MME 23 select Vapor Blue Me , Explorer ST 25
I f i get my hand on FDRS is it possible to download something like voice or language pack som my mach e is speaking polish and update my maps to europe ?
avdonr
Well-Known Member
- First Name
- Avdon
- Joined
- Dec 5, 2022
- Threads
- 1
- Messages
- 247
- Reaction score
- 300
- Location
- Canada
- Vehicles
- 2021 Mustang Mach-E GT PE
- Occupation
- Software Engineer
No, FDRS will not change the regional software installed on your car. It will only update/install whatever region it came with from the factory.
MajsterkoV
Well-Known Member
- First Name
- Bartek
- Joined
- Jul 15, 2024
- Threads
- 8
- Messages
- 53
- Reaction score
- 5
- Location
- Poland
- Vehicles
- MME 21 Premium Iced Blue , MME 23 select Vapor Blue Me , Explorer ST 25
Even when i did chane region to Poland using forscan ?
rugedraw
Well-Known Member
- First Name
- Javier
- Joined
- Nov 13, 2023
- Threads
- 0
- Messages
- 2,633
- Reaction score
- 2,390
- Location
- Miami, FL
- Vehicles
- 2021 Ford F150 Platinum FX4 EB/2023 Bronco Sport Badlands/1991 Mustang 5.0 coupe
- Occupation
- Auto Sales
Unfortunately, without access to PTS, I can't really see anything. However, I would not stress the PSCM not popping up; maybe you already had it installed. Check what strategy your PSCM is on and post it and maybe someone who is fully updated can compare the version you're on to theirs and verify you are on the latest one.IPMA update took 90 minutes, before i started i got an firmware update on my mongoose.
Would not recommend the path i took with the 30 Amps power supply, but it got the job done. I was down at 11.3 Volt....
BCM is running now without issues.
PSCM is nowhere to be found
Arjan
Well-Known Member
- First Name
- Arjan
- Joined
- Feb 14, 2020
- Threads
- 6
- Messages
- 360
- Reaction score
- 241
- Location
- NL
- Vehicles
- Ford Mustang Mach-E GT Performance
No i am not worried about PCSM not popping up, but i am a bit disappointed that i got no APIM update. I have seen some pictures of a newer version then i have right now (also in my country).
The biggest issue i have right now is with android auto not being stable, so i really wanted to update this module to see if my issues are fixed or if i need to make a dealer appointment.
So my best guess is that the update is not released for my '21 GT yet, or it has been pulled back.
Cjpayne
Well-Known Member
- First Name
- Chris
- Joined
- Apr 27, 2021
- Threads
- 4
- Messages
- 342
- Reaction score
- 370
- Location
- Auburn, IN
- Vehicles
- 21 Ford Mach E GT. 69 Mustang Convertible, 15 MKX
- Occupation
- General Manager in manufacturing
VIN 3FMTK4SE2MME00387. After FDRS last weekend the ground speed is not adjusting after recognizing a speed limit change. Speed adjusts for following. Can someone please check if I have any errors? I reran test after updating and had all green. Thanks.
iw2ntn
Active Member
- First Name
- PierGiuseppe
- Joined
- Jun 2, 2024
- Threads
- 3
- Messages
- 27
- Reaction score
- 12
- Location
- ITALI - Milano
- Vehicles
- Ford Mustang Mach-e
Good morning everyone,
after updating all the modules of the car this error in the PCM module has not gone away in any way. In fact I noticed that when testing the module, when the radiator fan is activated the front grilles on the lower bumper do not open.
Thinking that they were manually blocked, they open and close with a little force, but electrically they always remain in the position in which they are.
What could it be in your opinion.
Attached are the photos of the error detected with FDRS
after updating all the modules of the car this error in the PCM module has not gone away in any way. In fact I noticed that when testing the module, when the radiator fan is activated the front grilles on the lower bumper do not open.
Thinking that they were manually blocked, they open and close with a little force, but electrically they always remain in the position in which they are.
What could it be in your opinion.
Attached are the photos of the error detected with FDRS
Mike G
Well-Known Member
- First Name
- Mike
- Joined
- Mar 27, 2022
- Threads
- 25
- Messages
- 6,449
- Reaction score
- 5,289
- Location
- N. AL, USA
- Vehicles
- '23(J1) Mach-E GT-PE, '22 F-150 Lightning, '24 Bronco HLE 2Dr
Snakebitten
Well-Known Member
- Joined
- Mar 1, 2024
- Threads
- 0
- Messages
- 2,262
- Reaction score
- 3,777
- Location
- Coastal Texas
- Vehicles
- 2023.5 Mach-E
You go first! ?
My "legacy" version worked yesterday and I plowed through everything that popped up for both vehicles in the last couple of months.
One thing for sure, Ford shows no signs of letting up on the continuous refinements on these vehicles. OTA might torture you, since it just can't keep pace, but that Mongoose hardly gets a chance to gather dust.
By the way, I was starting to think that we'd go a full year without a 2024 Sync4 build. But alas, 24174 has arrived. (will the Mach-E get a compile?)
Sponsored
