GT Performance Edition 20" wheels now available aftersales for $1430 per set (TPMS included) - Part # M-1007K-M2080

[methorian]

I believe that is the same center cap part number for the 20" wheels. I think they only make one center cap for the Mach-E wheels but I could be mistaken.

Thanks - I'll be able to verify this evening using one from my stock premium 19" wheels.

Hopefully I can get someone out of Ford Accessories. I think the biggest issue is that they don't have the Mach-E center caps on their site, it's only on Ford Parts.

Sponsored

 

[SWO]

I believe that is the same center cap part number for the 20" wheels. I think they only make one center cap for the Mach-E wheels but I could be mistaken.

I think this is correct. Fordparts.com will hide the full part #, but when you add one 20" GTPE center cap and one 18" center cap to your cart, it shows 2x of the same part in your shopping cart.

The good news is that it's a cheap part - probably easier to just order it yourself than try to ship everything back.

 

[methorian]

I think this is correct. Fordparts.com will hide the full part #, but when you add one 20" GTPE center cap and one 18" center cap to your cart, it shows 2x of the same part in your shopping cart.

The good news is that it's a cheap part - probably easier to just order it yourself than try to ship everything back.

You're right, I see the same thing.

Will still fight it with Ford Accessories. $62 for 4 pieces of plastic that were supposed to be included isn't cheap enough for me to ignore.

Anyone need extra GT wheel aero covers?!?!

 

[SWO]

Anyone need extra GT wheel aero covers?!?!

I actually might be interested in them.

 

[methorian]

I actually might be interested in them.

Just shoot me a PM if you end up wanting them and we can work out a price.

 

[generaltso]

Just shoot me a PM if you end up wanting them and we can work out a price.

It might work out if you can sell them for what it would cost to buy the center caps.

 

[methorian]

Got my imposter wheels on today. Had the tires (Continental ExtremeContact DWS 06 Plus XL's) mounted at my local Firestone. Cleaned them up well and coated with some Adam's ceramic coating I had on hand then mounted on the Mach-E this evening. Looking pretty good, IMO!

Only problem now is that I can't get TPMS sensors to learn. The wheel kit came with TPMS/valve stems and the learning tool. I put the car in learning mode (turn acc on, press hazard light on/off three times) but putting the sensor tool up to any of the sensors does nothing. Tried the letting air out of the tire method as well with no luck.

I haven't given it a drive yet, so figure I'll see what happens after that since I'll need to re-check lug nut torque anyways (man, 150lb ft is hefty - that's the max my torque wrench will go!)

EDIT: Went for a drive and looks like it automatically picked up the new sensors. Doubt they’re actually correctly labeled/placed though.

 

[shutterbug]

Got my imposter wheels on today. Had the tires (Continental ExtremeContact DWS 06 Plus XL's) mounted at my local Firestone. Cleaned them up well and coated with some Adam's ceramic coating I had on hand then mounted on the Mach-E this evening. Looking pretty good, IMO!

Looks pretty good. Should have been the OEM wheels on 1st Edition.

 

[Nemy]

Got my imposter wheels on today. Had the tires (Continental ExtremeContact DWS 06 Plus XL's) mounted at my local Firestone. Cleaned them up well and coated with some Adam's ceramic coating I had on hand then mounted on the Mach-E this evening. Looking pretty good, IMO!

Only problem now is that I can't get TPMS sensors to learn. The wheel kit came with TPMS/valve stems and the learning tool. I put the car in learning mode (turn acc on, press hazard light on/off three times) but putting the sensor tool up to any of the sensors does nothing. Tried the letting air out of the tire method as well with no luck.

I haven't given it a drive yet, so figure I'll see what happens after that since I'll need to re-check lug nut torque anyways (man, 150lb ft is hefty - that's the max my torque wrench will go!)

EDIT: Went for a drive and looks like it automatically picked up the new sensors. Doubt they’re actually correctly labeled/placed though.

Awesome. Take it the center caps from the premium worked? Can you update on the range/consumption as soon as you can? I'd be curious before the 20% ends (IIRC 8/31)

 

[methorian]

Awesome. Take it the center caps from the premium worked? Can you update on the range/consumption as soon as you can? I'd be curious before the 20% ends (IIRC 8/31)

Yea, forgot to mention the stock center caps work fine. Still wanting to get a replacement set from Ford though.

Won’t have a good range hit estimate until maybe tomorrow, but unfortunately they’re OOS on Ford Accessories now so I’m not sure you’ll be able to take advantage of that $200 offer anyways I’m afraid.

 

[methorian]

Awesome. Take it the center caps from the premium worked? Can you update on the range/consumption as soon as you can? I'd be curious before the 20% ends (IIRC 8/31)

An update on range/consumption from my commute into work this morning. It's a 46mile (one-way) commute, mostly highway going 65-70. I typically average around 3.5-3.7mi/kWh in the mornings and with the new wheels/tires I averaged 3.3mi/kWh this morning (per the built-in readings).

I will say that I'm a bit surprised at the difference in ride quality. It seems improved, where I didn't really expect much of a difference. I don't feel like it's as "twitchy" as it used to be? I dunno, maybe I'm looking too much into it, but my drive in this AM seemed more pleasant than usual.

 

[SWO]

Got my imposter wheels on today. Had the tires (Continental ExtremeContact DWS 06 Plus XL's) mounted at my local Firestone. Cleaned them up well and coated with some Adam's ceramic coating I had on hand then mounted on the Mach-E this evening. Looking pretty good, IMO!

Only problem now is that I can't get TPMS sensors to learn. The wheel kit came with TPMS/valve stems and the learning tool. I put the car in learning mode (turn acc on, press hazard light on/off three times) but putting the sensor tool up to any of the sensors does nothing. Tried the letting air out of the tire method as well with no luck.

I haven't given it a drive yet, so figure I'll see what happens after that since I'll need to re-check lug nut torque anyways (man, 150lb ft is hefty - that's the max my torque wrench will go!)

EDIT: Went for a drive and looks like it automatically picked up the new sensors. Doubt they’re actually correctly labeled/placed though.

Did you go with the stock GTPE tire size (245's)?

For the TPMS tool - are you placing it next to the valve stem and holding the button until you hear the honk?

 

[methorian]

Did you go with the stock GTPE tire size (245's)?

For the TPMS tool - are you placing it next to the valve stem and holding the button until you hear the honk?

I did go with stock size, maybe I'll change it up in the future.

I figured out the TPMS thing - you have to drive around a bit after putting new wheels/sensors on. Once the car has picked up the new sensors you can then do the training/learning thing so it knows which is where. (Maybe this is common knowledge, but I wasn't aware... I was trying to train it right after putting new wheels/sensors on which didn't work.)

 

[JGuske23]

I really wish these would come back in stock before the promo ends

 

[SWO]

I really wish these would come back in stock before the promo ends

Lakeland(?) Levittown Ford has/had a special running for just over $1k for the set, though they are not in stock. Probably a good (better?) price even if you have to pay shipping.

https://www.levittownfordparts.com/sku/m-1007k-m2080.html

Actually, looking at the link they may be in stock now. Last week it said 30+ day estimated delivery.

Sponsored