chances are your not meeting the requirements to apply the update. I’ve found way more effort than should be needed is required to “trigger” the updates.I got 3.6.1 less than a week ago. I’m hoping the system has finally found me.
Do you have recommendations on what to do?chances are your not meeting the requirements to apply the update. I’ve found way more effort than should be needed is required to “trigger” the updates.
I can only recommend what seemed to work for me. to be fair it didn’t always work right away and took persistence.Do you have recommendations on what to do?
I don't think this is the case. The conditions are applicable after the update is received, but there are no requirements for receiving updates other than to have a good network signal to enable the download to occur. Ford sends them using some sort of prioritization scheme that is unknown to us users. It will come when Ford sends it and I don't think there is anything we can do to accelerate or delay that process.chances are your not meeting the requirements to apply the update. I’ve found way more effort than should be needed is required to “trigger” the updates.
I’m just relaying what worked for me. It’s anecdotal.I don't think this is the case. The conditions are applicable after the update is received, but there are no requirements for receiving updates other than to have a good network signal to enable the download to occur. Ford sends them using some sort of prioritization scheme that is unknown to us users. It will come when Ford sends it and I don't think there is anything we can do to accelerate or delay that process.
I have a schedule for 1am every night but the last 2 updates came in late afternoon and I had the option to apply it right away or wait for the schedule. So I don't think having a schedule set makes a difference when it downloads.I can only recommend what seemed to work for me. to be fair it didn’t always work right away and took persistence.
1. connect car to wifi
2. Connect car to charger. I don’t care what anyone says I went to 100% and it worked for me.
3. Make sure manual updates are set.
4. All steps 1-3 overnight.
5. Drive for 15-20 mins where you are accelerating and regen breaking.
6. Keep checking software updates and it usually shows up after a few drives.
emphasis on the “trying” somwtimes I had to wait 2 days for an update to come through.
usually it goes 3.5.4 > 3.61 > 3.62 > 4.1.1 > 4.1.2