The Complete DIY Guide to Updating Your Mach-E with FDRS

[Jefke77]

?

Sponsored

 

[21st Century Pony]

I will post it in this thread.
I hope someone can give me some assistance.
just updated all available updates with FDRS.
I was expecting to get the new UI,
But nope.
Or do I need to do this updates also to get the new UI?
thanks in advance.

I think that the Ford HQ server needs to "cycle" with your car's recorded updates before it will decide to send you the next sequence of updates. Sometimes within 24 hours, sometimes a bit longer.

Just two+ weeks ago I was in Germany helping a member's family update a newly purchased, used 2021 Mach E. There were, like, nine layers of different APIM software updates that had to be loaded... about 15 gigabytes haha. Took a looooong time. Also, within 24 hours as we updated his car, we got the next versions of the TCU update, like twice, within hours.

I see that You are in the EU area... those Euro updates are IMHO much more complex because of the complexity of languages and interacting layers of different regulations on that continent. Maybe an EU member can answer with better information about the UI versions available.

However, based on the updates still to go, I'd say just to go ahead and update these as well. The APIM update is key to future ones for the UI.

 

[Jefke77]

Okay,
Thanks for the quick reply,
As you see they are in the tab. Programmable features and not in the Tab SW Update.
bit you should do this 3 downloads also?

 

[21st Century Pony]

Okay,
Thanks for the quick reply,
As you see they are in the tab. Programmable features and not in the Tab SW Update.
bit you should do this 3 downloads also?

Ahhh yes... the other tab.

I would not do these. IMHO they are on that other tab in case the current modules need to be replaced (damage, etc.) and reprogrammed.

 

[Jefke77]

Okay thanks,
Then it’s probably just waiting.
for something to show up again.

 

[Arjan]

I will post it in this thread.
I hope someone can give me some assistance.
just updated all available updates with FDRS.
I was expecting to get the new UI,
But nope.
Or do I need to do this updates also to get the new UI?
thanks in advance.

Did you rescan after flashing all modules ? Most of the time new updates will popup
Past week we updated 2 MME models from 2021 and at first they did not get the APIM update

 

[Jefke77]

Hoi Arjan.
Yes, I did re-scan a couple times.
no result. Nothing shows up.
but now I have no connection with the ford servers. Rebooting pc now. ?

So you have the new UI on an 2021 Job 2 car?

 

[Arjan]

Hoi Arjan.
Yes, I did re-scan a couple times.
no result. Nothing shows up.
but now I have no connection with the ford servers. Rebooting pc now. ?

So you have the new UI on an 2021 Job 2 car?

Yup !

 

[Jefke77]

Strange,
You have some more ideas to try?

 

[Jefke77]

I have a DTC on the TRM module.
Someone have a idea how to solve?
maybe that’s blocking the other updates to show up?

 

[Jefke77]

?

 

[Neil4Real]

?

Trying letting it sit for a bit, make sure you fully turn the car on and then let it sit off. Turn it back on and try to clear with the self test. If that doesn’t work, maybe run the towbar configuration you posted previously and see what road that takes you down.

 

[Jefke77]

Did the TRM tow bar configuration,
No DTCs anymore. ?
but let’s hope someupdates showing up soon now.
I hoped to get the new UI this weekend. ??

 

[21st Century Pony]

Did the TRM tow bar configuration,
No DTCs anymore. ?
but let’s hope someupdates showing up soon now.
I hoped to get the new UI this weekend. ??

Hope springs eternal... and Christmas comes soon I hope that Santa brings you the new UI.

 

[737flyer]

Anybody have a newer UI than 1049

Sponsored