Post here if you have an active FDRS account and are willing to look up info for others

[ensign_lee]

Hi Mike! Just wanted to say thanks for your help! I ended up getting this car the last weekend.

They refused to do the updates without anything wrong (lame), but oh well.

I appreciate you! You helped another Mach E pony find a home!

Sponsored

 

[Jetsurly]

Any chance someone can check my VIN for me? Would like to see if anything is stuck. It’s been a while since any updates. Just did the 12V battery reset too.

3FMTK4SE1PMA28514

Thank you!

 

[SpaceLeftBlank]

My curiosity has finally gotten the better of me—if the offer still stands, can you check 3FMTK4SE2PMA37822 ?

Thanks!

 

[Robob]

3FMTK4SE1PMA28514

 

[Robob]

3FMTK4SE2PMA37822

 

[rugedraw]

Any chance someone can check my VIN for me? Would like to see if anything is stuck. It’s been a while since any updates. Just did the 12V battery reset too.

3FMTK4SE1PMA28514

Thank you!

You got a GWM update on 2/20. I would not say you haven't had anything in a while. Your OTA history is clean and extensive. Based on the list that @Robob provided, you are showing the right modules pending updates to progress. Your car is fine.

 

[mach-ebert]

Trying to see if it's worth getting an FDRS subscription for some weekend updates. Can anyone check for me? Please and thanks in advance! 3FMTK3SUXMMA10901

 

[rugedraw]

Trying to see if it's worth getting an FDRS subscription for some weekend updates. Can anyone check for me? Please and thanks in advance! 3FMTK3SUXMMA10901

This is what PTS is showing you have pending. FDRS may show more; especially after a network scan is done, but you are on the latest Sync . If you use BC a lot, the IPMA/PSCM updates you see there will greatly improve BC as well as some other driver assist features.

OTA history shows IPC update 6.8.0 was sent to you several times and failed, yet PTS is not showing an IPC update pending. I'll check what version your IPC is on when I get home in FDRS and also check in FDRS shows anything different since I don't trust PTS when it comes to showing pending module updates.

 

[mach-ebert]

This is what PTS is showing you have pending. FDRS may show more; especially after a network scan is done, but you are on the latest Sync . If you use BC a lot, the IPMA/PSCM updates you see there will greatly improve BC as well as some other driver assist features.

OTA history shows IPC update 6.8.0 was sent to you several times and failed, yet PTS is not showing an IPC update pending. I'll check what version your IPC is on when I get home in FDRS and also check in FDRS shows anything different since I don't trust PTS when it comes to showing pending module updates.

Thank you! Appreciate the info.

 

[rugedraw]

Thank you! Appreciate the info.

So PTS was right. Those 5 modules are all you show pending. Your IPC is not on the software that 6.8.0 gives you and you have no IPC update showing in FDRS. It possible that it pops if a network scan is done with FDRS. That was the issue with an IPC update on my vehicle over two years ago which is what caused me to get into all of this to begin with. The IPC update would fail via the OTA process and would not update with the USB method in FDRS. I had to CAN it in which took 6 hours.

Your car is not showing any codes that I can tie to a TSB or SSM that you can use to get the dealer to do the update for you. If you have a good relationship with them, tell them you've had an IPC update fail several times and they will be able to confirm that in PTS. If they plug your can into FDRS and it shows up and they do it for you, then problem solved. If the IPC update does not show up in FDRS when they scan it, we can reconvene then.

Or, just wait for the OTA process.

 

[mach-ebert]

So PTS was right. Those 5 modules are all you show pending. Your IPC is not on the software that 6.8.0 gives you and you have no IPC update showing in FDRS. It possible that it pops if a network scan is done with FDRS. That was the issue with an IPC update on my vehicle over two years ago which is what caused me to get into all of this to begin with. The IPC update would fail via the OTA process and would not update with the USB method in FDRS. I had to CAN it in which took 6 hours.

Your car is not showing any codes that I can tie to a TSB or SSM that you can use to get the dealer to do the update for you. If you have a good relationship with them, tell them you've had an IPC update fail several times and they will be able to confirm that in PTS. If they plug your can into FDRS and it shows up and they do it for you, then problem solved. If the IPC update does not show up in FDRS when they scan it, we can reconvene then.

Or, just wait for the OTA process.

Thanks for the info!

 

[CarGuy11]

Never seen this one before. And nothing ever loaded. Is it downloading something?
3FMTK3SU9NMA41574

 

[rugedraw]

Never seen this one before. And nothing ever loaded. Is it downloading something?
3FMTK3SU9NMA41574

It is not. No active OTA trigger on your car at this time.

 

[Cesaarel]

I haven’t received an OTA after my 6.1.1 failed to update. I keep seeing the update not completed screen. Can you check to see how many 6.1.1 has attempted to update?

3FMTK3R75NMA19684

 

[spicy_taco]

Which I can confirm while monitoring my car with the month of FDRS access I have, I do also usually see random loss of IPMA communication stored codes in ABS or random open circuit codes on RFA or random modules that if anything is showing orange in FDRS will from my understanding hold up an OTA if its pending.
I never get any check engine lights or warning that the car has had an issue but upon plugging it into FDRS you see these random codes popping up. Hopefully it can be fixed with some updates to the appropriate modules... Soon™

OMG, thank you for confirming my car is not going crazy. Every two to three days I see a DTC with "IPMA loss of Ethernet connectivity with GWM", or "GWM loss of Ethernet connectivity with IPMA", or "RFA open circuit"..... I honestly thought my car is having a bad harness or failing IPMA. But I never see a light show up, and after clearing the codes with Forscan or Car Scanner it's clear for the next day or two.

Sponsored