Post here if you have an active FDRS account and are willing to look up info for others

[SkywalkerSE]

Since the dealer manually updated my car for 4 days back in January I’ve received around 10 OTA updates so it finally works as it’s supposed to! Now I’m wondering if FDRS is showing anything interesting or if everything is fine.

WF0TK3SU6MMA23368

Thanks!

Sponsored

 

[vaporblu]

Hello, new to the forum here.
Can I please get a check when available for any updates needed on my 23 GT
3FMTK4SE1PMA63568. Thank you!

 

[rugedraw]

Check 1, 2

3FMTK3SU4MMA06035

Assuming you're looking for pending module updates, your list is below.

Just bought a '22 MME, WF0TR3SU1NMA43492. It's been sitting on the lot for a while (Ford NZ had to drop their pants a bit on pricing to sell them!).
Please could someone lookup if it has any software updates available? We don't get OTA updates here in New Zealand so it'd be interesting to know if the dealer has done updates. Would also love to know any service history on it and 12V battery health if that's available/easy to get (think I saw some screenshots of that info in this thread).

Thanks a lot for doing this for us!

Pending updates are below. Service history only shows the ABS was updated last month. Something is wrong here. Ford shows you are on Sync 22242 which is very old, yet you don't show and pending updates for the Sync-related modules. It also seems like your APIM was replace in October of last year, but I see no indication that is was programmed. Post a pic of the "about sync" screen in your touchscreen settings under the general section.

Since the dealer manually updated my car for 4 days back in January I’ve received around 10 OTA updates so it finally works as it’s supposed to! Now I’m wondering if FDRS is showing anything interesting or if everything is fine.

WF0TK3SU6MMA23368

Thanks!

Here you go.

Hello, new to the forum here.
Can I please get a check when available for any updates needed on my 23 GT
3FMTK4SE1PMA63568. Thank you!

Welcome to the forum. Lucky you. Not much pending.

 

[Default]

Pending updates are below. Service history only shows the ABS was updated last month. Something is wrong here. Ford shows you are on Sync 22242 which is very old, yet you don't show and pending updates for the Sync-related modules. It also seems like your APIM was replace in October of last year, but I see no indication that is was programmed. Post a pic of the "about sync" screen in your touchscreen settings under the general section.

Thanks for the info. Here's a pic of the "about sync" screen.

 

[vaporblu]

Thanks for the quick response!

 

[rugedraw]

Thanks for the info. Here's a pic of the "about sync" screen.

Interesting. Everything matches with what I see. Give me a bit to look into it further and I'll message you. Connectivity seems to be working fine. You sure OTA's are not supported in New Zealand?

 

[Mike G]

Yet again I need help of you comrades! Can someone check whether there is an APIM (from what I’ve understand those are OTAs eligible for the car) on the car: WF0TK1E70MMA64167? Thanks in advance!

No APIM today but if the cruise control and powertrain items get updated a new gateway might show up followed by an APIM. Not guaranteed though.

 

[Mache_Nor]

No APIM today but if the cruise control and powertrain items get updated a new gateway might show up followed by an APIM. Not guaranteed though.

Thanks!

By the way; Do you know how long those two (or any of the other modules) might take to update manually? My dealer is offering to do it, but at an hourly wage, thus I just want to check whether some updates could be done without ordering 10 work hours.

 

[Mike G]

Thanks!

By the way; Do you know how long those two (or any of the other modules) might take to update manually? My dealer is offering to do it, but at an hourly wage, thus I just want to check whether some updates could be done without ordering 10 work hours.

I do indeed. The powertrain set would take roughly 25 minutes.

The IPMA by itself can take either an hour using a VCM3 or 2.5hrs using a VCM2. The PSCM that gets scripted to update with the IPMA takes another 5 minutes.

BCM is another 5-10 minutes.

 

[Mache_Nor]

I do indeed. The powertrain set would take roughly 25 minutes.

The IPMA by itself can take either an hour using a VCM3 or 2.5hrs using a VCM2. The PSCM that gets scripted to update with the IPMA takes another 5 minutes.

BCM is another 5-10 minutes.

Sorry for spamming, but are there some places I can lookup what those different modules does? For example, image processing modules sounds interesting, but if it makes no changes, then it would be a waste to fix those.

 

[JosephG53]

Assuming you're looking for pending module updates, your list is below.

Pending updates are below. Service history only shows the ABS was updated last month. Something is wrong here. Ford shows you are on Sync 22242 which is very old, yet you don't show and pending updates for the Sync-related modules. It also seems like your APIM was replace in October of last year, but I see no indication that is was programmed. Post a pic of the "about sync" screen in your touchscreen settings under the general section.

Here you go.

Welcome to the forum. Lucky you. Not much pending.

Thanks so much

 

[Omen]

3FMTK4SE2PMA44401, please and thank you

 

[aleiana]

I see a BECM fault likely due to moisture in the charge port back on the 13th, but no reports newer than that. I do see that the car is fully charged to 100% this morning and a 12V battery at 12.1V and 81% SOC. So I would be inclined to go with the same thing your dealer tech is saying. I don't think anything else is wrong with the car other than the 12V battery has reached it's end. When you get the new 12V battery mark it on the calendar, cause roughly at the 3yr mark you'll need a replacement again. That seems to be the consensus for Mach-E and Lightning owners.

After replacing the battery, dealer has now determined I have the dreaded junction box issue. Will still mark my calendar for a 3 year battery replacement. Thanks!

 

[SkywalkerSE]

Here you go.

Thanks, brother! Glad that my car is finally catching up.

 

[rugedraw]

@Default Do you know if in New Zealand, other Mach E's have a Sync version newer than the one in your car? Maybe you can look through local dealers and get me the VIN off of a couple of them so I can compare? Depending on the country/region, Ford does not have the same Sync software available as they do in other markets. I think your Sync version is way too old to be the most current they offer, but I have no to know for sure without comparing it to similar vehicles.

Sponsored