FiXED...No way to access the camera??

[HuntingPudel]

It works when in reverse, so I assume no fault.

BC uses the front and side cameras in conjunction with other sensors. It couldn’t hurt to see if @Mach-Lee or someone else with the tools can pull codes (if any exist). ?‍?

Sponsored

 

[Mach-Lee]

BC uses the front and side cameras in conjunction with other sensors. It couldn’t hurt to see if @Mach-Lee or someone else with the tools can pull codes (if any exist). ?‍?

No IPMA codes seen.

I suggest they disconnect the 12V battery to reset all modules.

 

[New2EV]

Here's the vin if anyone can figure out what is going on. 3FMTK3RM8MMA39268

I just really don't have time to mess with taking to a dealer right now.

 

[New2EV]

No IPMA codes seen.

I suggest they disconnect the 12V battery to reset all modules.

I'll give it until tomorrow and if the issue is still there, I'll try disconnecting the battery.

 

[New2EV]

No IPMA codes seen.

I suggest they disconnect the 12V battery to reset all modules.

No luck. No update overnight, so I disconnected the battery and left it for almost an hour. No change. Still no camera button. BC date still shows 2073.

 

[New2EV]

FiXED!!!

I decided to see if there was anything forscan could do to solve my missing camera button issue. I re-upped my forscan license and connected my OBDII interface. The APIM has a setting called "Camera Soft Button" that was disabled. I enabled it, wrote to module and once Sync reset, the camera button appeared!!!

Wonder if this would work for the 2023's?

Now that I have a valid forscan license again.....time to see what else I can enable......

Thanks to everyone who tried to help. Really appreciate this forum and everyone on it!

Sponsored