I got 6.13.0 just now (driver facing camera improvements)

[NJ_MachE]

I can verify this update is being pushed to non-EA 22s now. Next up, Blue Cruise 1.4? Only major 6.x update I can't recall getting so far is the diagnostic/Voldemort update.

Sponsored

 

[Just Lurking]

I can verify this update is being pushed to non-EA 22s now. Next up, Blue Cruise 1.4? Only major 6.x update I can't recall getting so far is the diagnostic/Voldemort update.

Great! My non-EA GT '22 just got 6.8 today, so I assume either 6.13 or the unnumbered update is next for me. On-track to get 7.0 no later than January, it seems.

 

[mach-JT]

My 23 CR1 6.13 update Dec 14 at 0100. 0930 Electrical system drain service required followed by plug in to maintain 12V battery. Coincidence? Dropped off a dealer, on their schedule for Monday. morning

Any updates on this? I may be experiencing a similar issue.

 

[CarGuy11]

I can verify this update is being pushed to non-EA 22s now. Next up, Blue Cruise 1.4? Only major 6.x update I can't recall getting so far is the diagnostic/Voldemort update.

Cool I haven’t received the unnumbered updates either!

 

[LUV_RED]

Non-EA 2022 Premium RWD installing now.

 

[Dave159]

Any updates on this? I may be experiencing a similar issue.

Haven't heard from service dept yet. Will update when I hear something.

 

[elmedico27]

Installed this afternoon, non-EA 2022 Premium ER AWD

 

[Phil-Springs]

2022.5 CR1. Got it last night.

 

[HBGuy]

I've received several updates over the past two weeks, typically about two days apart. Today's was 6.8.0.0 and it installed without incident. My Mach-E is a March 2021 Job-1, Premium.

 

[DanoiZ]

I use ACC as much as I can so I never really noticed this but yah, when disengaged, having the static car icon is yet another stupid GUI design choice. I'd really love to sit down with whoever makes these choices to try an understand their logic.

I’m still furious about the speedometer placement change. I HATE it!

 

[DanoiZ]

I'm on 6.2 and my speedo is still in the center. I don't use any drivers aids.

If you don’t want a useless car icon in the middle instead of where speed should be properly placed, turn off your updates. If I had known I would have.

 

[adaminca]

I updated my GTPE to v6.13.0 on 12/14/23 while at work. Following my 30-mile commute home I hadn’t driven it much until my Tu-Th commute cycle. I got the “Electrical System Drain” message tonight while it was plugged in and waiting to start charging. I have nothing plugged into my vehicle other than the charge cord from my Sieman’s (Model VG2) charger.

I did notice that my charger was short-cycling before the 9pm charge cycle began and assumed it was me cause my PAAK was triggering an electrical load. I never experienced that when my previous car, a Fusion Energi, was plugged in. Looking now I see it is charging at 7.5K as expected but have already scheduled a visit to the dealer in the morning.

 

[adaminca]

Comments from the dealer:

Performed BCE test: B1616:04 present in memory. Access 12v battery and performed battery drain test per PPT C: 45MA current draw after modules enter sleep mode (PASS). Clear DTCS and retest: PASS. Performed charking of HV battery frmo 77% to 100% with no issues. No related TSBs or SSMs for related concern. Unable to duplicate concern at this time.

I don't understand some of the acronyms but I get the sense that the test removed module load in order to watch for unexplained current draw. Since this passed and I do not connect accessories in my vehicle I have no explanation as to why my 12v battery ran low other than I updated to v6.13.0 while at work and not connected to power.

The fault of this as an explanation is that I had at least 5 trips of 30 minutes or longer and the car was plugged into my L2 charger each night (charge to 80%) before the error occurred. If everything is working as it should the 12v should have been charged.

So, my dealer has this noted for future reference. The service department sent notes about the incident to Ford. Hoping others are prompting dealers to do the same in case this is another software issue mucking with the charge system.

 

[ChasingCoral]

Cool I haven’t received the unnumbered updates either!

Either that or you did and didn’t notice. It happens.

 

[ChasingCoral]

I've received several updates over the past two weeks, typically about two days apart. Today's was 6.8.0.0 and it installed without incident. My Mach-E is a March 2021 Job-1, Premium.

You won’t get 6.13.0.

Sponsored