Dumb question I'm sure, but there isn't room to get a hand up behind to see if the module is plugged in w/o removing cover?
Looks like I uploaded the same PDF's in these posts over the last few years on how to remove the bumper cover. ?
That actually is not a dumb question.
Thanks to you I see what we need to do and it doesn't look that bad. Think I'll just wait till we get home and do it properly. I know I'm lazy but I suppose I can get along turning the wheel that little bit. I haven't tried the self park lately, but I assume this module would be pretty important for that. Thanks again
I know you all have been sitting on the edge of your chairs waiting to find out what was wrong, ya right. Got the bumper cover off today thanks to the info from markboris and sure enough the mounting bracket and 2 mounting tabs on the module were broke. I'll try and add some pictures, but the only thing I can see is some paint missing for a couple inches on the inside edge of the bumper cover which you don't see when it is place. Couple months ago I hit a pheasant that just about went through the windshield, maybe he hit that corner first, no sign of anything on the outside, good paint!
Wow, I guess the pheasant must have hit that area first like you said. That is amazing it did all that damage without any visible sign from the outside of the bumper including the paint. Glad the photos I posted helped you out. ?I know you all have been sitting on the edge of your chairs waiting to find out what was wrong, ya right. Got the bumper cover off today thanks to the info from markboris and sure enough the mounting bracket and 2 mounting tabs on the module were broke. I'll try and add some pictures, but the only thing I can see is some paint missing for a couple inches on the inside edge of the bumper cover which you don't see when it is place. Couple months ago I hit a pheasant that just about went through the windshield, maybe he hit that corner first, no sign of anything on the outside, good paint!
Advice on what?
I can't post any more pictures, they all come up like the above
I mistakenly hit the insert all, full image when I had the other pictures ready to send and now each picture is 12 pictures, advice please.
I can't post any pictures, they come out like the above, how do I get out of that? I've logged out, shut off, but nothing has helped so far.
I noticed while we have everything open, I have a coolant reservoir closer to the passenger front wheel that is way low, what could have caused that, haven't noticed any leaks.No, I tried another one
That would be a question for Lee (Mach-Lee).
That is the power electronics reservoir, which provides coolant for the motor inverters, motor windings, AC charger, and DC/DC converter. If that is low, you should fill it back up with 50% Motorcraft Yellow coolant ASAP (get a $20 bottle from your Ford dealer). Have you had any shop work done on the vehicle that involved removing high voltage modules or the battery?
